Name: CCT-53BBX3 : Cylindrically-conical X3 Unitank Fermenter (pressure design, cooling jacket) BrewBuilt 53 liters | 1bar | AISI 304
SKU: CCT-53BBX3
Price: 820 EUR
Availability: InStock

Description

The CCT-53BBX3 is an universal stainless steel low-pressure cylindrically-conical fermenter with total capacity of 53 liters. Recommended filling capacity is maximally 49 liters. 100% Tri Clamp connections DIN32676, the cooling jacket and the optional neoprene insulation jacket for temperature control and the controlled fermenting, and the ability to carbonate in one vessel make this tank a perfect fermenter at any Micro Brewery looking to brew little beer batches.

The equipment may be supplemented and with other accessories described in the section “Optional accesories”

Main advantages of the Cylindrically-conical X3 Unitank Fermenter :

The entire tank is made of AISI 304 stainless steel. Precisely ground and polished internal welds ensure maximum hygiene and easy chemical cleaning of the tank.
The built-in cooling jacket provides significantly better temperature control and hygiene than classic spirals. It is easy to clean and allows effective cooling even at higher ambient temperatures.
The lower transparent collection container allows you to monitor fermentation, collect sludge and yeast and at the same time connect other accessories (carbonization stone, dry hopping equipment etc.)
Thanks to the pressurizing set with a float, you can take beer (or other beberage) from above – always clean and without sediment. Ideal for pouring into kegs, bottles or cans without oxidation.

Main features:

Purpose :	Stainless steel cylindrically-conical tank (CCT) for fermentation and maturation of beer, cider, wine
Total capacity :	53 liters when filled to the brim
Minimal filling capacity :	3 liters (The minimum volume is limited by the position of the lower TriClamp connection in the cone)
Minimal filling capacity :	49 liters (Typical output capacity is 38 liters – there must stay enough space for foam above a product)
Material:	Stainless steel AISI 304
Surface :	Matt stainless steel finish on the outside, super smooth stainless steel finish and welds on the inside
Conical bottom:	The cone is designed with an optimal angle of 60°, which allows for effective sedimentation of solids (yeast and sediment).
Working pressure :	1.0 bar / 15 psi (The built-in safety pressure relief valve)
Maximal pressure :	1.5 bar / 22 psi
Pipe connections on the top lid :	1 x 8″ (DN 200) Lid Cap Opening with 8” TriClamp 5 x 1.5″ (DN 40) TriClamp Lid Openings
Pipe connections on the body:	1 x 2“ (DN 50) TriClamp port for direct immersion heaters 1x 1.5″ (DN 40) TriClamp thermosensor well for inserting thermal probe
Cooling pipe connections on the body :	2x 1.5″ (DN 40) TriClamp (cooling water input / output)
Drain valve :	1x 3″ (DN 80) TriClamp bottom dump with 3″ TriClamp butterfly valve – drain valve in the bottom
Robust construction:	The CCT tank is made of high-quality materials, stands on four adjustable legs.

Dimensions :

Usable volume [liters]	49
Total volume [liters]	53
Total height [mm] (with the fermentation plug)	1080
Total diameter [mm]	592
Weight of empty tank [kg]	31
Weight of full tank [kg]	84

Description :

A ) The pressurizing set : TriClamp 4″ (DN 100)

B) The clamp : TriClamp 4″ (DN 100)

C) The gasket : TriClamp 4″ (DN 100)

D) The clamp : TriClamp 8″ (DN 200)

E) The gasket : TriClamp 8″ (DN 200)

F) The lid with the PRV 1 bar safety valve : TriClamp 8″ (DN 200)

G) The Hose mandrel for blow-off : TriClamp 1.5″ (DN 40)

H) The Silicone hose for blow-off

I) 7x The clamp : TriClamp 1.5″ (DN 40)

J) 7x The gasket : TriClamp 1.5″ (DN 40)

K) 7x The blinder : TriClamp 1.5″ (DN 40)

L) The Tank body

M) The thermo sensor well : TriClamp 1.5″ (DN 40)

N) The Sample valve : TriClamp 1.5″ (DN 40)

O) The gasket : TriClamp 2″ (DN 50)

P) The clamp : TriClamp 2″ (DN 50)

Q) The blinder : TriClamp 2″ (DN 50)

R) 2x The gasket : TriClamp 3″ (DN 80)

S) 2x The clamp : TriClamp 3″ (DN 80)

T) The Butterfly valve : TriClamp 3″ (DN 80)

U) The Neoprene insulation jacket (optional accessory)

V) The 600 ml transparent yeast collection container

W) 4x The adjustable legs

Recommended use

Usable for the fermentation process	yes
Usable for the maturation process	yes
Usable for the storage of the finished product	yes
Usable for the non-pressure product flotation	yes
Usable for the product clearing under pressure	yes
Usable for the product filtration under pressure	yes
Usable for manual filling of the product into kegs	yes
Usable for manual filling of the product into bottles	yes
Usable for machinery filling of the product into kegs	yes
Usable for machinery filling of the product into bottles	yes

Optional accessories (for surcharge)

Basic tank pressurizing set The pressurizing set provides full control over the fermentation process and beer bottling. It allows both traditional bottling of beer from tanks by hose using gravity, and pushing beer out of the tank under pressure using CO₂ gas, which preserves the natural carbonation of beer and protects beer from oxidation.	description
Pressure relief safety valve 1.0 bar Stainless steel pressure relief safety valve 1.0 bar for the fermentation stainless steel tanks	description
Glycerine Manometer 0-2bar \| TriClamp 1.5″ 50.5mm Glycerine manometer with pressure range of 0-2 bar with a membrane and TriClamp connection DN40 / 1.5″ / 50.5mm.Material AISI 316 stainless steel.	description
Adjustable pressure relief valve \| TriClamp 1.5″ 50.5mm The scaled version of the spunding pressure relief valve with a water airlock includes an sleeve with a scale between 0-3 bar, along with a pressure calibrated spring.	description
BrewBuilt pressurizing kit \| TriClamp 4″ 114mm The BrewBuilt pressurizing kit TriClamp TC DN100 119mm / 4″, with the TC DN40 50.5mm 1.5″ TriClamp port and two Ball-Lock connectors.	description
Insulation jacket Additional insulation jacket for the Cylindrically-conical X3 Unitank Fermenter BrewBuilt 53 liters. Recommended equipment of the tank for save cooling power and for tanks placed in non-cooled space.	description
Four Caster Wheel Set Make it easier to handle the fermenter when sanitizing, pumping wort, pouring beer into a KEG or cleaning. Thanks to the wheels, even a fully loaded stainless steel fermenter can be moved comfortably without unnecessary effort.	description
Cooling/heating spiral 470mm, TriClamp 114mm TC 4″ The stainless steel cooling spiral is designed for cooling the fermentation vessel, by immersion directly in the fermenting beer or cider it effectively maintains ideal temperatures for fermentation.	description
Pipe elbow – draining the tank The stainless steel fitting – Pipe Reducer (elbow) with cone from TriClamp 2.5″ D=91 mm (DN65) to TriClamp 1.5″ D=50.5 mm (DN40). The useful tool for the connection of a hose on the tank drain outlet connector.	description
HOP BONG for adding hops, TriClamp 64mm TC 2″ DRY HOP (Hop Bong) set for adding of hop to cold beer – effective and safe cold hopping without oxidation. This way you can produce traditional Indian Pale Ale, European Pale Ale and other similar beer types with very bitter taste.	description
Complete Pressurizing set with the HopBong The pressurizing kit TriClamp TC DN100 119mm / 4″, with the TC DN40 50.5mm 1.5″ TriClamp port, the HopBong, the butterfly valve and two Ball-Lock connectors. The integrated HopBong allows you to add dry hops to your cold beer.	description
Butterfly valve \| 2x TriClamp 1.5″ 50.5mm Disc valve (butterfly valve) with security locking device and gaskets. > 2x TriClamp 1.5″ (DIN32676 Ø 50.5mm) AISI 304.	description
Hose connector \| TriClamp 1.5″ 50.5mm Hose connector for hose d15mm (1/2″) > TriClamp 1.5″ (DIN32676 Ø 50.5mm) AISI 304.	description
Mini CIP spray ball \| TriClamp 1.5″ 50.5mm CIP cleaning and sanitizing nozzle for use with Nano stainless steel pressure fermentation tanks – with the TriClamp 1.5″ (DIN32676 Ø 50.5mm) connection with the tank	description
Wort oxygenation set \| TriClamp 1.5″ 50.5mm Set of components intended to oxygenation wort (or fruit juice) during filling the intermedia product in the tank. This process is recommended for easy start of the primary fermentation process in the fermenter.	description
The HOP BONG CARBO flow saturator 2 µm Simple plastic small saturator (HOP BONG CARBO) for flow-through saturation of beverages.	description
Sample valve for small fermentors \| TriClamp 1.5″ 50.5mm Sample valve to collection samples of beer from the tank.	description
Anti foam sampling spiral – the foam remover Optional accessory of the sample valve serves to remove foam from beer when is sampling under pressure from the tank. Compatible with the sample valve delivered with the Nano fermenters.	description
Micro sight glass \| TriClamp 1.5″ 50.5mm Simple pipe sight glass to multi use in your brewery to see how looks and flows beverage you just transport in the pipes or hoses.	description
Micro T-connector 3x \| TriClamp 1.5″ 50.5mm Simple T-connector (the pipe splitter) with 3pcs of the TriClamp 1.5 connections allows you to split a beverage or water pipeline to more branches.	description
Micro elbow 2x \| TriClamp 1.5″ 50.5mm Simple elbow 90° with 2pcs of the TriClamp 1.5 connections – for example to connection of the spunding adjustable pressure relief valve.	description
Short extension pipe \| TriClamp 1.5″ 50.5mm Short pipe extension to multi use in your brewery. Length 4.3 cm (1.7″) , two 1.5″ TriClamp flanges.	description
Long extension pipe \| TriClamp 1.5″ 50.5mm Long pipe extension to multi use in your brewery. Length 15.24 cm (6″) , two 1.5″ TriClamp flanges.	description
Pipe Reducer TC 1.5″ to BSP 1/2″F The stainless steel fitting : pipe reducer with TriClamp 1.5″ DN15 / D=50.5 mm and inner thread BSP 1/2″ (female).	description
Pipe Reducer TC 1.5″ to BSP 1/2″M The stainless steel fitting : pipe reducer with TriClamp 1.5″ DN15 / D=50.5 mm and outer thread BSP 1/2″ (male).	description
Thermometer well TriClamp \| TriClamp 1.5″ 50.5mm Thermowell for insert of the thermo sensor for the small fermenters to be mounted on the tank. Depth of 150mm, hole diameter of 7.49mm	description
Compact liquid cooler 500W for 1-2 tanks Compact water (glycol) cooler with four integrated pumps, digital temperature controllers and temperature sensors (fully equipped temperature control system for use with 1-2 tanks). Cooling capacity 500 W is sufficient for cooling of 2 insulated tanks up to 300 liters or non-insulated tanks up to 150 liters.	description
Compact liquid cooler 500W for 1-4 tanks Compact water (glycol) cooler with four integrated pumps, digital temperature controllers and temperature sensors (fully equipped temperature control system for use with 1-4 tanks). Cooling capacity 500 W is sufficient for cooling of 4 insulated tanks up to 150 liters or non-insulated tanks up to 75 liters.	description
Compact liquid cooler-heater 1.1/2.0 kW for 1 tank Compact water (glycol) cooler-heater with one integrated pump, digital temperature controller and temperature sensor. Cooling capacity 1.2 kW and heating capacity of 2.0 kW is sufficient for cooling or heating of one insulated tank up to 1500 liters or one non-insulated tank up to 800 liters.	description
Compact liquid cooler 2300W for 1-4 tanks Compact water (glycol) cooler with four integrated pumps, digital temperature controllers and temperature sensors (fully equipped temperature control system for use with 1-4 tanks). Cooling capacity 2300 W is sufficient for cooling of 4 insulated tanks up to 800 liters or non-insulated tanks up to 400 liters.	description
Cleaning and sanitizing station 2x30L CIP station 2×30 liters is a mobile machine to the sanitation and sterilization of vessels and piping routes. The CIP equipment provides heating and circulation of alkaline and acid solutions using a pump through pipe system, hoses and sanitary shower that sprays sanitary chemical solutions on interior walls of the sanitized vessel.	description

Recommended fully equipped system with the fermenter and the glycol cooler :

CFS-1CCT53BBX3 : Complete fermentation set with one BrewBuilt 53L X3 Unitank CCT Fermenter

The complete beer fermentation set. This set includes all equipment necessary for professional production of beer using the fermentation and maturation of wort using the fermentation and maturation process in one cylindrically-conical fermenter. This set is also designed for production of cider from fruit juice.

The set CFS-1CCT53BBX3 consists of :

1 pc of the BrewBuilt X3 Unitank CCT Fermenter 53 liters with the cooling jacket and a simple insulation jacket
Compact water/glycol chiller with two digital temperature regulators, two temperature sensors, two pumps.
Hoses and fittings to connection between cooler and tank.