UTK-PKC : TriClamp hole plug stainless steel with pressurizing kit for kegmenters – with TriClamp 1.5″ port (KL23573)

The kegmenter pressurizing kit (with the 1.5″ TriClamp port ) allows kegmentors to be used either as pressure fermenters for maturation and carbonation of beer, or to be used as kegs for transport and storage of finished beer, cider or other beverage, with Ball-Lock caps.

The pressure kit comes with a red pressure relief valve (which opens at 2.5 bar – its thread is compatible with Cornelius type pressure relief valves).

The set includes an 80 cm silicone immersion hose with a stainless steel float that keeps the mouth of the hose just below the surface. Thanks to this, beer will always be sucted from the upper 2.5 cm below the surface – only the cleanest beer without settled sludge will be pumped from the kegmenter.
This special version of the kegmenter pressurizing kit is equipped with the 1.5″ TriClamp port suitable for connection of other accessories (for example the HOP BONG set).

Technical parameters :

• Diameter 119mm (4″) for use with a TriClamp hole, Clamp and gasket.
• Additional 1.5″ TriClamp port
• After purchasing a kegmenter pressurization set, you can let ferment and mature your beer under pressure.
• Maximal working pressure 2.5 bar – possibility of carbonation and fermentation of beer in one container.

Recommended configuration for the pressure fermentation (the secondary fermentation / maturation / carbonation) :

FKRV-APM-01 : Adjustable pressure mechanism for the Fermzilla fermentors and fermentation stainless steel kegs

Designed to be used with all kegmenters :

UTK-29 : Stainless steel Unitank Kegmenter 29L – simple pressure fermenter 2.5bar (KL05906)

UTK-58 : Stainless steel Unitank Kegmenter 58L – simple pressure fermenter 2.5bar (KL04572)

UTK-118 : Stainless steel Unitank Kegmenter 118L – simple pressure fermenter 2.5bar (KL21241)

UTK-118D : Stainless steel Unitank Kegmenter 118L with two TC ports – simple pressure fermenter 2.5bar (KL04541)