CCT-30CP : Cylindrically-conical tank (pressure fermenter) ConPro 30 liters | 1.0bar | AISI 304

(1 of which is equipped with a DN40 1.5″ TriClamp sampling valve)

Basic tank pressurizing set

The pressurizing set provides full control over the fermentation process and beer bottling. It allows both traditional bottling of beer from tanks by hose using gravity, and pushing beer out of the tank under pressure using CO₂ gas, which preserves the natural carbonation of beer and protects beer from oxidation.

Pressure relief safety valve 1.5 bar | TriClamp 1.5″ 50.5mm

Big pressure relief safety valve 1.5 bar for fermentation tanks, with TriClamp DN40 connection (Connection disc with a diameter of 50.5mm). Automatically releases excess pressure in the tank when pressure 1.5 BAR (22 psi) is exceeded.

Pressure relief safety valve 1.0 bar

Stainless steel pressure relief safety valve 1.0 bar for the fermentation stainless steel tanks

Glycerine Manometer 0-2bar | TriClamp 1.5″ 50.5mm

Glycerine manometer with pressure range of 0-2 bar with a membrane and TriClamp connection DN40 / 1.5″ / 50.5mm.Material AISI 316 stainless steel.

Adjustable pressure relief valve | TriClamp 1.5″ 50.5mm

The scaled version of the spunding pressure relief valve with a water airlock includes an sleeve with a scale between 0-2 bar, along with a pressure calibrated spring.

Blind disc with pressurizing kit | TriClamp 4″ 114mm

The pressurizing kit allows a fermentor to be used either as pressure fermenter for maturation and carbonation of beer, or to be used as a keg for storage of finished beer, cider or other beverage, with Ball-Lock caps.

Insulation jacket

Additional insulation jacket for the CCT-30CP Cylindrically-conical tank (pressure fermenter) ConPro 30 liters. Recommended equipment of the tank for save cooling power and for tanks placed in non-cooled space.

Cooling/heating spiral 470mm, TriClamp 114mm TC 4″

The stainless steel cooling spiral is designed for cooling the fermentation vessel, by immersion directly in the fermenting beer or cider it effectively maintains ideal temperatures for fermentation.

HOP BONG for adding hops, TriClamp 64mm TC 2″

DRY HOP (Hop Bong) set for adding of hop to cold beer – effective and safe cold hopping without oxidation. This way you can produce traditional Indian Pale Ale, European Pale Ale and other similar beer types with very bitter taste.

Butterfly valve  | 2x TriClamp 1.5″ 50.5mm

Disc valve (butterfly valve) with security locking device and gaskets. > 2x TriClamp 1.5″ (DIN32676 Ø 50.5mm) AISI 304.

Hose connector  | TriClamp 1.5″ 50.5mm

Hose connector for hose d15mm (1/2″) > TriClamp 1.5″ (DIN32676 Ø 50.5mm) AISI 304.

Mini CIP spray ball  | TriClamp 1.5″ 50.5mm

CIP cleaning and sanitizing nozzle for use with Nano stainless steel pressure fermentation tanks – with the TriClamp 1.5″ (DIN32676 Ø 50.5mm) connection with the tank

Wort oxygenation set  | TriClamp 1.5″ 50.5mm

Set of components intended to oxygenation wort (or fruit juice) during filling the intermedia product in the tank. This process is recommended for easy start of the primary fermentation process in the fermenter.

The HOP BONG CARBO flow saturator 2 µm

Simple plastic small saturator (HOP BONG CARBO) for flow-through saturation of beverages.

 Sample valve for small fermentors  | TriClamp 1.5″ 50.5mm

Sample valve to collection samples of beer from the tank.

 Anti foam sampling spiral – the foam remover

Optional accessory of the sample valve serves to remove foam from beer when is sampling under pressure from the tank. Compatible with the sample valve delivered with the Nano fermenters.

Micro sight glass  | TriClamp 1.5″ 50.5mm

Simple pipe sight glass to multi use in your brewery to see how looks and flows beverage you just transport in the pipes or hoses.

Micro T-connector 3x  | TriClamp 1.5″ 50.5mm

Simple T-connector (the pipe splitter) with 3pcs of the TriClamp 1.5 connections allows you to split a beverage or water pipeline to more branches.

Micro elbow 2x  | TriClamp 1.5″ 50.5mm

Simple elbow 90° with 2pcs of the TriClamp 1.5 connections – for example to connection of the spunding adjustable pressure relief valve.

Short extension pipe  | TriClamp 1.5″ 50.5mm

Short pipe extension to multi use in your brewery. Length 4.3 cm (1.7″) , two 1.5″ TriClamp flanges.

Long extension pipe  | TriClamp 1.5″ 50.5mm

Long pipe extension to multi use in your brewery. Length 15.24 cm (6″) , two 1.5″ TriClamp flanges.

Pipe Reducer TC 1.5″ to BSP 1/2″F

The stainless steel fitting : pipe reducer with TriClamp 1.5″ DN15 / D=50.5 mm and inner thread BSP 1/2″ (female).

Pipe Reducer TC 1.5″ to BSP 1/2″M

The stainless steel fitting : pipe reducer with TriClamp 1.5″ DN15 / D=50.5 mm and outer thread BSP 1/2″ (male).

Thermometer well TriClamp | TriClamp 1.5″ 50.5mm

Thermowell for insert of the thermo sensor for the small fermenters to be mounted on the tank. Depth of 150mm, hole diameter of 7.49mm

Compact liquid cooler 500W for 1-2 tanks

Compact water (glycol) cooler with four integrated pumps, digital temperature controllers and temperature sensors (fully equipped temperature control system for use with 1-2 tanks). Cooling capacity 500 W is sufficient for cooling of 2 insulated tanks up to 300 liters or non-insulated tanks up to 150 liters.

Compact liquid cooler 500W for 1-4 tanks

Compact water (glycol) cooler with four integrated pumps, digital temperature controllers and temperature sensors (fully equipped temperature control system for use with 1-4 tanks). Cooling capacity 500 W is sufficient for cooling of 4 insulated tanks up to 150 liters or non-insulated tanks up to 75 liters.

Compact liquid cooler-heater 1.1/2.0 kW for 1 tank

Compact water (glycol) cooler-heater with one integrated pump, digital temperature controller and temperature sensor. Cooling capacity 1.2 kW and heating capacity of 2.0 kW is sufficient for cooling or heating of one insulated tank up to 1500 liters or one non-insulated tank up to 800 liters.

Compact liquid cooler 2300W for 1-4 tanks

Compact water (glycol) cooler with four integrated pumps, digital temperature controllers and temperature sensors (fully equipped temperature control system for use with 1-4 tanks). Cooling capacity 2300 W is sufficient for cooling of 4 insulated tanks up to 800 liters or non-insulated tanks up to 400 liters.

Cleaning and sanitizing station 2x30L

CIP station 2×30 liters is a mobile machine to the sanitation and sterilization of vessels and piping routes. The CIP equipment provides heating and circulation of alkaline and acid solutions using a pump through pipe system, hoses and sanitary shower that sprays sanitary chemical solutions on interior walls of the sanitized vessel.