FMT-SLP-500H is the simplified low-pressure beverage round-bottom tank with usable volume 500 liters and total volume 625 liters for both fermentation and maturation of beer, cider, wine and other beverages, made of stainless food steel DIN 1.4301 (AISI 304). Adjustable pressure from 0bar to 1.2bar, noninsulated, with water(or glycol) cooling channels.
The tank is completely made in Germany.
This offer and price includes the tank which is equipped with the most common equipment. This equipment may be replaced or supplementedand with other accessories described in the section “Optional accesories”
- Pressure arched top bottom : NW 400
- Safety valve mounted on top layer
- Type plate for the identification of the container
- Multi use connection: nozzle NW 25 DIN 11851 welded on the top arched bottom – intended for T-adapter to the connection of carbon dioxide valve and adjustable pressure valve or sprayhead holder NW 10 for a cleaning of the tank.
- Threaded neck for connection of the sample valve NW 10 DIN 11851
- Temperature measuring-welded threaded connector NW 10 DIN 11851
- Pure product drain outlet 1″ ET
- Sediment / yeast drain outlet 1″ ET
- Double jacket 2 x 1″ ET
- The tank is designed for both fermenting and maturating (under pressure) larger quantities of beer (or cider, wine).
- Material : Stainless steel AISI 304
- The special 3D inner surface facilitates cleaning
- With double cooling jacket at the tank cylinder for the easy automatically water cooling during the maturation and fermentation process
- Made in compliance with the guidelines for pressure equipment PED 2014/68/EU including approval from Germany’s Technical Inspection Agency (TÜV)
- The double cooling jacket is equipped with two threaded necks to connection of a water cooler.
- The tank stands stably and safely on three legs.
- Several useful available accessories for expanding of the tank.
Drawing of the basic tank :
|B||Plate for type plate|
|C||Threaded neck NW10 DIN 11851 SC 13x1.5|
|D||Threaded neck NW10 DIN 11851 SC 13x1.5|
|E||Threaded neck G1"AG : Drain of pure product|
|F||Bolted strut 40x8|
|G||Rectangular profile 50x30x2 - 360mm|
|H||Flat foot 40x5-100|
|I||Cooling jacket inlet / outlet : 2x Threaded neck G1"|
|J||Tube with internal thread G 1/2" DIN 2986|
|K||Threaded neck NW25 DIN 11851 SC 29x1.5|
|L||Arched bottom DIN 28011 t=2.5 (min 1.5)|
|M||Arched bottom DIN 28011 t=2.5 (min 1.5)|
|O||Threaded neck G1"|
|P||Pipe NW 25 DIN 11850|
|Q||Welded joint of bottom and cylindrical part|
|S||Pipe knee NW 25 DIN 11850 29x1.5|
|T||Screw joint M10x20|
|X||Leg - connection with a strut|
|Z||Leg system - top view|
|Usable volume [liters]||500|
|Total volume [liters]||625|
|Total height [mm]||1740|
|Total diameter [mm]||820|
|Weight of empty tank [kg]||85|
|Weight of full tank [kg]||710|
Standard properties, design and equipment
|Maximal allowed overpressure||1.2 bar|
|PED 2014/68/EU certificate||yes|
|Germany’s Technical Inspection Agency (TÜV) certificate||yes|
|Inner surface – surface quality of the stainless steel sheets||3D|
|Inner surface – roughness of the welds||Ra<0.8μm|
|Cooling channels (double jackets)||yes|
|Insulation of the tank||optionally|
|Pressure arched top bottom NW400||yes|
|Safety overpressure valve mounted on top arched bottom||yes|
|Type plate for the identification of the container||yes|
|Multi use connection: nozzle NW 25 DIN 11851 moulded on top layer. It is prepared to mounting of the T-adapter for the connection of carbon dioxide valve and plug apparatus or sprayhead holder NW 10 for cleaning >> See optional accessories bellow …||yes|
|Double jacket cooling channel in/out 2x 1″ ET||yes|
|Nozzle for sample cock NW10 DIN11851 >> See optional accessories bellow …||yes|
|Threaded thermometer socket NW10 – To mounting of the thermometer or the temperature sensor of the control system. See more about it …||yes|
|Pure product drain outlet 1″ ET||yes|
|Sediment / yeast drain outlet 1″ ET||yes|
|Stable legs [pcs]||3 pcs|
|Automatic temperature control system >> See optional accessories bellow …||optionally|
|Usable for the fermentation process||yes|
|Usable for the maturation process||yes|
|Usable for the storage of the finished product||yes|
|Usable for the non-pressure product flotation||yes|
|Usable for the product clearing under pressure||yes|
|Usable for the product filtration under pressure||no|
|Usable for manual filling of the product into kegs||yes|
|Usable for manual filling of the product into bottles||yes|
|Usable for machinery filling of the product into kegs||no|
|Usable for machinery filling of the product into bottles||no|
Example accessories (included in this configuration)
T-adapter allows the connection of carbon dioxide valve and plug apparatus or sprayhead holder NW 10 for cleaning.
Pressure adjusting apparatus
To adjusting of the pressure inside the tank during the fermentation or maturation process. Fits on T-adapter piece, connection IT ¾“ with coupling nut.
The reductor valve between CO2 hose and T-adapter. Fits on T-adapter piece. IT–ET ¾“
Sampling cock type 1
To tasting of beer, cider, wine directly from the tank.
Stainless steel ball valve 1″
To connection of hose between tanks and other equipment (pump, brewhouse, filter, other tank …)
Stainless steel drain valve 1″
To discharge the full content of the tank.
Optional accessories (for surcharge)
Recommended equipment of the tank for save cooling power and for tanks placed in non-cooled space. The additional insulation is positoned only on the cylindrical part of the fermentor.
The candle with a porous stone for the saturation of the beer, wine or cider by compressed oxygen, carbon dioxide, nitrogen or other technical gas, when the beverage is in the tank under pressure.
Sampling cock type 2
To tasting of beer, cider, wine directly from the tank.
To reducing of foam during the tasting of beer with the sampling valve. It is designed for use with simplified stainless steel pressure fermenting / maturating tanks and the sampling cock type 2.
Thermometer analog NW10
To mounting into the threated jacket NW10. May be replaced by the temperature sensor of the control system.
CIP sanitizing nozzle
To easy cleaning and sanitizing of the tank . It is optionally mounted on the NW10 instead the T-adapter during the tank sanitizing process.
Water (glycol) cooler for one single tank
Compact water (or glycol) cooler with integrated digital temperature controllers and temperature sensor (fully equipped temperature control system for use with a single tank). Cooling capacity 1200 W is sufficient for cooling of the insulated tanks up to 1000 liters or non-insulated tanks up to 500 liters.
Water (glycol) cooler for more tanks
Water cooler from 0.85 to 10 kW for simultaneous cooling more tanks. You need also use the measuring and temperature control system.
Temperature measuring and control system
Fully equipped temperature measuring and control system for simultaneous cooling more tanks. You need also use some water cooler with cooling capacity according of number and total volume of the tanks.
Compact temperature controller for one tank
Fully equipped compact temperature measuring and control system for cooling one tank (each tank requires one piece of the controller). You need also use some water cooler with cooling capacity according of number and total volume of the tanks.
How to choose the right type of CCT ?
|Type of CCT||CCT-SNP||CCT-SLP||CCT-SHP|
|Maximal adjustable pressure in the tank||0.0 bar||1.2 bar||2.5 bar|
|Usable for the fermentation process||yes||yes||yes|
|Usable for the maturation process||no||yes||yes|
|Usable for the storage of the finished product||no||yes||yes|
|Usable for the non-pressure product flotation||yes||yes||yes|
|Usable for the product clearing under pressure||no||yes||yes|
|Usable for the product filtration under pressure||no||no||yes|
|Usable for manual filling of the product into kegs||no||yes||yes|
|Usable for manual filling of the product into bottles||no||yes||yes|
|Usable for machinery filling of the product into kegs||no||no||yes|
|Usable for machinery filling of the product into bottles||no||no||yes|
If you are comparing our prices with competitors, please always make sure that any other manufacturer guarantees the same quality as our company offers.