Description
The FermZilla All-Rounder 60L is the simplest and the cheapest pressurizable plastic beer fermenter with capacity of 60 litres you can purchase. The plastic tank is suitable for both primary fermentation and secondary fermentation of beer (the natural beer carbonation at low temperature under pressure), in the same vessel, without handling beer between two different fermenters. This saves your work, but mainly increases the quality of the produced beer, because it excludes the loss of the drink and eliminates the risk of contaminating the beer when pumping the drink from one container to another one.
Advantages of the FermZilla All-Rounder fermenter:
- The possibility of pressureless fermentation of beer and maturation of beer under pressure, in the same container, which reduces the production of esters and alcohol.
- The possibility of tapping beer directly from the All-Rounder tank using a tap set.
- Thanks to the transparency of the container, you can easily monitor the entire process of beer fermentation.
- Easy transfer of beer from container to cuvette or keg thanks to Ball Lock stoppers.
Basic specifications:
- Volume 60 litres
- High molecular weight polyethylene body
- AISI 304 stainless steel frame
- Working pressure up to 2.4 Bar (35psi)
- Height: 790mm (with fermentation plug and stainless steel wire stand 950mm)
This set includes:
1x Plastic container (the All-Rounder tank)
1x Stainless steel wire stand
1x Yeast fermentation plug (air-water lock)
1x Pressure-resistant lid
1x Adhesive thermometer
1x Beer description sticker
1x Red overpressure relief valve 2.5 bar
1x Stainless steel handle
For fermentation under pressure, a pressurization kit must be purchased.
Why to use the All-Rounder ?
Easy to clean
This fermenter is made from super smooth PET so it’s easy to clean. No scrubbing necessary.
Large top 120mm opening
The opening at the top is signficantly larger then other similar fermenters. This has 120mm opening so everybody can easily get a hand into the fermenter making cleaning even easier.
Pressure rated
This fermenter is rated up to 2.5bar so you can carbonate your beer just the same way like in a stainless steel keg. You can use this fermenter for both fermentation phases and signficiantly reduce oxygen exposure.
Crystal clear walls
The wall of the All-Rounder is crystal clear so you can see what’s going on inside. This makes it really easy to determine visually how the beer fermentation takes place, how the yeast is floculating etc.
Impermeable material
The PET plastic is not permeable like some other fermenters made from PP or HDPE. The fermenter wall is a much better gas barrier keeping your product fresher for longer.
No flavour and aroma carries over
Other HDPE fermenters tend to be so pourous they carry flavour and aroma from one batch to another. Never happends it with the All-Rounder.
Robust and difficult to damage fermenter
Impossible to smash the All-Rounder like glass. The tank is impact resistant but light weight and easy to use.
IMPORTANT NOTE: This tank should not be used for hot liquid. Do not put liquids inside this tank over 50C. It will damage the tank. Also this tank comes pressure tested however we recommend that every 2 years you re-hydro test this tank yourself. Refer to the hydro-test instruction manual in the ‘instructions’ tab.
Dimensions :
Expand the All-Rounder for the pressure kit and pressure control mechanism and get more functions …
If you want to use the All-Rounder under pressure we would recommend that you use the pressure kit and the pressure control mechanism – this is necessary for use the pressure kit the All-Rounder for the natural carbonation of beer in the tank (the secondary beer fermentation).
Available optional accessories :
FZA-PK01 : Pressure kit for the FermZilla fermenters (KL01609)
To get the most out of your FermZilla, we recommend buying the optional pressure kit. This allows you to use the FermZilla as a beer dispensing vessel but also makes it possible to transfer to another keg without loss of pressure. With this pressure kit you unlock the FermZilla’s true potential.
The pressure kit turns the FermZilla fermenter into a true universal fermentation tank, which is a pressure conical fermenter for fermenting, carbonating, and dispensing your beer into bottles or glasses. As a result, more heat is retained and less esters and fusel alcohols are released during fermentation and maturation in the same container. This is a good way to get realy fantastic beer.
FZA-FT01 : Ball float with silicon dip hose 80 cm for the FermZilla fermenters (KL14076)
Ball float with silicon dip hose 80 cm is an optional accessory for the FileZilla fermenters. Silicone hose with stainless steel float allowing you to draw the clearest beer from the FermZilla fermenter.
Original replacement part for the FermZilla 27L and 55L fermenters. The silicone hose is 80 cm long. For use with the FermZilla 27 l the hose should be shortened to the desired length (approx. 60 cm).
FZAR-IJ60 : Insulation jacket for the 60L FermZilla All-Rounder fermenter (KL11488)
The insulation jacket is an useful addition to your 60 litre FermZilla All-Rounder fermenter. The insulation ensures that the fermentation temperature remains at the same level during the cold winter months. The insulating effect ensures that the heat generated by the fermentation is retained within the jacket. When the fermentation reaches too high a temperature, you can easily lower the temperature by adding a few frozen bottles or ice packs inside the insulation jacket. The insulation jacket has the main benefit of being completely lighttight. This ensures protection from harmful UV lightings and it prevents a light damage the beer.
CDT-SMUC : Hose connector for the FermZilla fermenters
Hose connector is a spare part for the FileZilla fermenters. This connector for the FermZilla fermenters can be used to connect the fermenter to bottle with CO2 or for transfer of beer out from the fermenter with hose.
This connector is part of the pressure kit as well.
Original replacement part for the FermZilla 27L and 55L fermenters. Material : Stainless steel AISI 304.
FZA-CS01 : Cooling/heating spiral for the FermZilla fermenters (KL14618)
The cooling/heating spiral is an optional accessory for the FileZilla fermenters. This equipment allows you to cool or heat a beverage which is fermented or carbonized in the FermZilla using an external water cooler/heater. With this simple cooling/heating spiral and cooler/heater you can produce all kinds of beer in the FermZilla fermenter, including lager beer. This coooling/heating spiral can be simply adapted to fit any fermenter that has an opening of 110mm diameter or larger. Simply drill to two 22mm holes in the lid of your fermenter and use the included duotight bulkhead fittings to attach the coil to the lid of your fermenter.
FZA-TW60 : Thermowell 60 cm for FermZilla fermenters
Stainless steel 60 cm well for thermometer to use with the FermZilla fermenters. With the FermZilla thermowell you never lose supervision of the beer fermentation. You can easily shorten the thermowell to fit the length of your fermenter.
Because the thermowell reaches the core of your tank and of your beer, you always have the most accurate temperature reading. Using a sufficiently long probe thermometer, you can accurately measure the current temperature of beer in your fermenter.
FKRV-APM-02 : Adjustable pressure mechanism for the Fermzilla fermenters with the manometer (KL09706)
The complete adjustable safety valve BlowTie set with Ball Lock bumper – the relief valve for fermentation under pressure in the FermZilla fermenters.
The set includes : BlowTie pressure regulator for 8mm hoses, Quick coupling “T” for 8mm hoses, Pressure gauge with range 0 – 1.6bar, Quick connector F7 / 16x8mm, Coupler Ball Lock 7/16 – gas, Plastic hose with outer diameter 8mm.
Parameters : Adjustable pressure range 0.0 up to 1.6bar (0 up to 23psi ), Precise pressure adjustment thanks to diaphragm inside regulator, Easy to adjust with screw, Two mounting points for wall mounting, Quick connection with 8 mm quick couplers.
Reviews
There are no reviews yet.