Small accessories and tools for microbreweries
BHM-01 Brewing hydrometer
Hydrometer with temperature correction for measuring original gravity of beer wort – Plato.
MCH-01 Measuring cylinder for hydrometer
Measuring cylinder for hydrometer for measuring original gravity of beer wort.
SBT2 Set of brewing tools
Set of brewing tools for BREWMASTER and NANOBEER small breweries. This set includes :
- Hydrometer and support plastic cylinder – The hydrometer is basic measurement tool for measuring original gravity of wort and beer – this is important for calculation of the percentage of alcohol in the beer, cider or wine. This set includes a noncalibrated hydrometer with temperature correction and support plastic cylinder.
- Large malt shovel – for handy removing malt from the brewhouse after lautering process.
- Cleaning set – set of tools for easy cleaning of the brewhouse, tanks and hoses.
- Malt barrel – the plastic vessel for easy collecting of the milled malt under the malt mill
- Wooden mash paddle – for handy occasional agitation of wort during the brewing process
SCS-01 Small cleaning set
Basic tools and solution for manual cleaning and sanitizing of hoses, fittings and other parts of small brewhouses, tanks and their accessories.
SBT1 – Set of brewing tools
- Sacharimeter brewery + attestation 0 – 6° 1 pc
- Sacharimeter brewery + attestation 4°-10° 1 pc
- Sacharimeter brewery + attestation 10°– 20° 1 pc
- Alcoholometer + attestation(only in ČR) 1 pc
- Graduated cylinder 1 pc
- Pump for ice water (spare part) 1 pc
- Pump for passing beer EBARA CDXM 70/7 1 pc
- Beer hose EPDM 4 pcs
- Reducion valve CO2 1 pc
- Hose and connector CO2 50 m
- Hose and connector distribution beer 150 m
- Stainless step ladder at CKT/SP 1 pc
- Holder of saccharimeter, design oak/stainless 1 pc
- Cooling of samples (only with stainless brewhouse) 1 pc
- Pump sight glass with detour DN 25 or 32 1 pc
- Gauge rod of mash kettle 1 pc
- Yeast collector (only with fermentation tank) 1 pc
- Beer hose coupling DN 25 or 32 3 pcs
- Handling and fixing equipment
COM-1M Module for COM-16 Central Oxygenation Manager
The oxygenation module for managing of oxygenation process in one tank – compatible with the COM-16 Central Oxygenation Manager. The COM-16 allows place up to 16 modules in one cabinet.
Note: The OxyBox COM-1M modules are capable of up to 30 cubic cm / Minute (OxyBoy capacity) only !
RVA-CO2 Reducing valve for pressure bottles with CO2 gas
The reducing valve is a component needed to measuring, reducing and dosing of pressurized carbon dioxide from pressure bottles. Pressurized carbon dioxide is necessary technical gas in all breweries or wineries to pushing of beer or wine from tanks to other tanks, from isobaric filling beverages into bottles or kegs, for filtering beer etc.
We do not supply this important part in the set with pressure bottle. The customer provides themself by a local supplier of industrial gases, who also ensures the further fulfillment of these bottles by carbon dioxide. Current appearance of the product of the equipment may be different of the picture.
EMPS-6 : Electromagnetic metal-parts separator for the malt mill MMR-1200 series
The optional accessory for malt mills MM-1200 series for increase the purity of grinding. Its function is the separation of metal parts from milled malt above rollers.
HBA-PTA-25 Pipe T-adapter for simple pressure tanks
Pipe T-adapter for use with simplified stainless steel pressure tanks.
HMS-01 Noncalibrated hydrometer set
The hydrometer is basic measurement tool for measuring original gravity of wort and beer – this is important for calculation of the percentage of alcohol in the beer, cider or wine. This set includes a noncalibrated hydrometer with temperature correction and support plastic cylinder.
JOX-01FV Flap valve for JOX-01 Tank beverage oxygenation jet
The flap valve for mounting the JOX-01 Tank beverage oxygenation jet on the beverage tank. The JOX-01 oxygenation jet is easy removable from the tank (also when the tank is full). The flap valve needs a hole through tank jacket with diameter 37mm. Available also with fittings NW50 (DN50) , Tri-Clamp or ball-valve.
These flaps are made of stainless steel. They can be welded onto the tank during the manufacture or added with the seal afterwards (in this case they need a hole). They are very safe and common and can be found in the tasting-opening of nearly every wine and beer tanks.
MM-4000-EM : Electromagnetic metal-parts separator for Malt mills MM-4000 series
The optional accessory for malt mills MM-4000 series for increase the purity of grinding. Its function is the separation of metal parts from milled malt above rollers.
MTOM-1OBC Cliquage
MTOM-1OBC Cliquage is an option accessory for MTOM-1OB (OxyBoy). The dosing element of the OxyBoy is bypassed and the unit allows the oxygen to flow with the pressure of 1.5-2.0 bar directly from the pressure reducer. The OxyBoy sends a strong jet of Oxygen into the tank. This action is timer-controlled, so you can time to inject jet oxygen for a number of seconds or minutes into a tank, or into the beer flowing through the plate-heat-exchanger etc. Excess oxygen can escape to the air though the opening at the top of the tank.
MTOM-1TSK Temperature sensor kit
MTOM-1TSK Temperature sensor kit – the option accessory for MTOM-1OB (OxyBoy)
PFH-DIN11851-25 Beverage hose splitter DN25
The beverage hose splitter is a special tool to easy filling of pure product (like beer wort , fruit juice) to the fermentation tank. It is pipe hub with, one product input, two product outputs a sight glass and two butterfly valves. This equipment is designed for example for work during filling wort into fermenters after finishing of the wort brewing process. The beverage hose splitter is designed mainly to separation of water and sludges from the pure beverage product during pumping beverage to the fermentation tanks. Connections 1x DIN 11851 female DN 25, 2x DIN 11851 male DN 25.
PFH-DIN11851-32 Beverage hose splitter DN32
The beverage hose splitter is a special tool to easy filling of pure product (like beer wort , fruit juice) to the fermentation tank. It is pipe hub with, one product input, two product outputs a sight glass and two butterfly valves. This equipment is designed for example for work during filling wort into fermenters after finishing of the wort brewing process. The beverage hose splitter is designed mainly to separation of water and sludges from the pure beverage product during pumping beverage to the fermentation tanks. Connections 1x DIN 11851 female DN 32, 2x DIN 11851 male DN 32.
PFH-DIN11851-40 Beverage hose splitter DN40
The beverage hose splitter is a special tool to easy filling of pure product (like beer wort , fruit juice) to the fermentation tank. It is pipe hub with, one product input, two product outputs a sight glass and two butterfly valves. This equipment is designed for example for work during filling wort into fermenters after finishing of the wort brewing process. The beverage hose splitter is designed mainly to separation of water and sludges from the pure beverage product during pumping beverage to the fermentation tanks. Connections 1x DIN 11851 female DN 40, 2x DIN 11851 male DN 40.
PFH-DIN11851-50 Beverage hose splitter DN50
The beverage hose splitter is a special tool to easy filling of pure product (like beer wort , fruit juice) to the fermentation tank. It is pipe hub with, one product input, two product outputs a sight glass and two butterfly valves. This equipment is designed for example for work during filling wort into fermenters after finishing of the wort brewing process. The beverage hose splitter is designed mainly to separation of water and sludges from the pure beverage product during pumping beverage to the fermentation tanks. Connections 1x DIN 11851 female DN 50, 2x DIN 11851 male DN 50.
PFH-DIN11851-60 Beverage hose splitter DN60
The beverage hose splitter is a special tool to easy filling of pure product (like beer wort , fruit juice) to the fermentation tank. It is pipe hub with, one product input, two product outputs a sight glass and two butterfly valves. This equipment is designed for example for work during filling wort into fermenters after finishing of the wort brewing process. The beverage hose splitter is designed mainly to separation of water and sludges from the pure beverage product during pumping beverage to the fermentation tanks. Connections 1x DIN 11851 female DN 60, 2x DIN 11851 male DN 60.
PFH-DIN32676-25 Beverage hose splitter DN25
The beverage hose splitter is a special tool to easy filling of pure product (like beer wort , fruit juice) to the fermentation tank. It is pipe hub with, one product input, two product outputs a sight glass and two butterfly valves. This equipment is designed for example for work during filling wort into fermenters after finishing of the wort brewing process. The beverage hose splitter is designed mainly to separation of water and sludges from the pure beverage product during pumping beverage to the fermentation tanks. Connections 3x DIN 32676 TriClamp DN 25 Ø34mm.