Integrated regulators and sensors for single tank temperature control system.
STTC-FC178F Single tank temperature controller FermCont FIX
STTC-FF178 Single tank temperature controller FermCont is used in Breworx breweries and cider lines for measuring and control of temperatures in tanks (HWT, ITWT, ICWT, CCT, OFV, BBT …). This temperature controller is designed for fix instalation, directly on the tank. The controller cooperates with other components of the BTCCS (Breworx tank cooling control system). All the measuring and control system is Designed in Germany.
C2105 – Microprocessor temperature regulator
C2105 temperature regulator is used in Breworx breweries for measuring and control of temperatures in tanks (HWT, ITWT, ICWT, CCT, OFV, BBT …). The controller cooperate with WJ500 junction box, which makes wiring easy and convenient in brewery installation and VM800 electrovalves.
STTC-FC178V Single tank temperature controller FermCont VARIO
STTC-FC178V Single tank temperature controller FermCont VARIO is used in Breworx breweries and cider lines for measuring and control of temperatures in tanks (HWT, ITWT, ICWT, CCT, OFV, BBT …). This temperature controller is designed for fix instalation, directly on the tank. It is equipped with the VARIO jack plug connector for easy and quick connestion with the STTC-CB100V connection box. The controller cooperates with other components of the TTMMCS (Tank temperature manual measurement & cooling system). All the measuring and control system is Designed in Germany.
NANOFIX : Single tank temperature controller – full set with thermo sensor and regulation valve
NANOFIX is the fully equipped temperature regulation set for single tank. One only has to connect the unit to the power and cooling water supply. Clear arrangement with a large actual and target temperature display.
The set includes :
- Digital temperature controller – with display of the current and desired temperature and control buttons
- Thermo sensor with 6mm diameter and cable 5m
- Motorized regulation ball valve with pipe connections 1/2″ Female and 5m cable
- Power supply adapter 220V/50 Hz (EU version) or 110V 60Hz (US version)
NANOSOLO MBV : Single tank mobile temperature controller – compact full set with temperature sensor and motorized ball valve
The NANO SOLO MBV is a compact temperature measure and control unit for single tank. It is supplied complete with temperature sensor, motorized ball valve and GEKO 1/2″ bayonet fittings. One only has to connect the unit to the power and the hose with cooling water supply . Clear arrangement with a large current and desired temperature display. The stainless steel supporting plate with a hook fits many installation types.
The set includes :
- Digital temperature controller – with display of the current and desired temperature and control buttons
- Temperature sensor in the stainless steel sleeve 7 mm x 240 mm
- Motorized regulation ball valve with bajonet pipe connections 1/2″ GEKA plus and 5m cable
- Thermo sensor with 6mm diameter and cable 5m
- Stainless steel holding plate with a hook for flexible mounting
- One of three possible power supply connectors (230VAC / 24VAC / BUS)
NANOSOLO SV : Single tank mobile temperature controller – compact full set with temperature sensor and solenoid valve
The NANO SOLO SV is a compact temperature measure and control unit for single tank. It is supplied complete with temperature sensor, solenoid valve and GEKO 1/2″ bayonet fittings. One only has to connect the unit to the power and the hose with cooling water supply . Clear arrangement with a large current and desired temperature display. The stainless steel supporting plate with a hook fits many installation types.
The set includes :
- Digital temperature controller – with display of the current and desired temperature and control buttons
- Thermo sensor in the stainless steel sleeve 7 mm x 240 mm
- Solenoid valve with bajonet pipe connections 1/2″ GEKA plus and 5m cable
- Temperature sensor with 6mm diameter and cable 5m
- Stainless steel holding plate with a hook for flexible mounting
- One of three possible power supply connectors (230VAC / 24VAC / BUS)
NANOTOP : Universal fermentation / temperature controller for tanks or rooms
NANO TOP is a digital temperature controller of the NANO SYSTEM for one tank, with a display of actual and target temperature.
The device can easily be installed wherever you want. The matching mounting plates are also available. The NANO TOP can be operated centrally using the NANO TERMINAL unit. The control unit and its functionality can be significantly expanded this way.
Four variants are available :
- NANO TOP – TC : Digital temperature controller – with display of the current and desired temperature and control buttons
- NANO TOP – US : Universal sensor controller for a sensor with output voltage range 0-10V, 1-5V, 0-5V, 0-20mA, 4-20mA, (for e.g. pressure sensor, CO2 sensor, humidity sensor, etc.) For use only with the NANO TERMINAL.
- NANO TOP – SK : Switch unit for the collective contacts – if you use additional the NANO TERMINAL then you need this unit. This unit runs the pump (cooling pump and/or heating pump) on demand (automatic).
- NANO TOP – KM : Switch unit for easy “monitoring” the cooling unit (AquaSnap or AquaZero). For use only with the NANO TERMINAL.
NANOTANK : Single tank temperature controller – with integrated rod temperature sensor
NANOTANK is a digital temperature controller for single tank. It is equipped with integrated rod temperature sensor in the stainless steel sleeve that is designed to be inserted into the thermowell on the tank. Clear arrangement with a large actual and target temperature display.
The set includes :
- Digital temperature controller – with display of the current and desired temperature and control buttons
- Temperature sensor in the stainless steel rod 7 mm x 240 mm
Ready to be connected with accessories :
- Ready to be powered with the external power supply adapter 220V/50 Hz (EU version) – not included
- Ready to be connected to the external motorized regulation ball valve 24V – not included
- Compatible with the Tank Control Nano Terminal (TCNT unit)
BMGM-01 GÄRMEISTER : Automatic temperature control system for fermentors
Special computer for convenient supervision for the fermenting process. Accessory for the simplified fermentors of the BREWMASTER brewing and fermentation system.
STTC-FC180C Single tank temperature controller FermCont COMPACT
STTC-FC180C Mobile single tank temperature controller FermCont COMPACT is used in Breworx breweries and cider lines for measuring and control of temperatures in tanks (HWT, ITWT, ICWT, CCT, OFV, BBT …). This temperature controller is designed for mobile instalation, directly on the tank or out of tank. The controller cooperates with other components of the TTMMCS (Tank temperature manual measurement & cooling system). All the measuring and control system is Designed in Germany.
XR20CX – Microprocessor temperature regulator
XR20CX temperature regulator is used in Breworx breweries for measuring and control of temperatures in tanks (HWT, ITWT, ICWT, CCT, OFV, BBT …).
XR20D – Microprocessor temperature regulator
XR20D temperature regulator is used in Breworx breweries for measuring and control of temperatures in tanks (HWT, ITWT, ICWT, CCT, OFV, BBT …). The controller cooperate with WJ500 junction box, which makes wiring easy and convenient in brewery installation and VM800 electrovalves.
STTC-CB100C Connection box for the CTTCS controller cabinets IP54
The STTC-CB100C is a connection box for the CCTTS Central control tanks cabinets. It is used for the connection between the control cabinet and the regulation valves. The STTC-CB100C is equipped for a fixed installation on the wall or steel frame near the tank.
STTC-CB100F Connection box for the FermCont temperature controller FIX/IP65
The STTC-CB100F is a connection box for the STTC-FC178F Single tank temperature controller. It is used for the connection between the STTC-FC178F controller, the power supply and (optionally) the control computer. The STTC-CB100F and the STTC-FC178F FermCont are equipped for a fixed installation. All the this measuring and control system is Designed in Germany.
STTC-CB100V Connection box for FC178V temperature controller VARIO/IP65
The STTC-CB100V is a connection box for the STTC-FC178V Single tank temperature controller . It is used for the connection between the STTC-FC178V controller, the power supply and (optionally) the control computer. The STTC-CB100V and the STTC-FC178V FermCont are equipped with a plug connector ‘VARIO’ – for easy installation. All the this measuring and control system is Designed in Germany.
STTC-SS180 Sensor socket for FF178 temperature controller
STTC-SS180 is the 180mm temperature sensor socket for the STTC-FF178 Single tank temperature controller FermCont . All the measuring and control system is Designed in Germany.
CCK-100 : Cable 100m for TTMMCS – one cooling zone
Cables for power and data connecting of all components (one cooling zone) with TTMMCS manual tank temperatrure control system. Includes 100 meters of 3-wires insulated cable.
WJ505 TTC connection box for 5xC2105 controllers
WJ505 is a junction box, which makes wiring easy and convenient in brewery installation. It allows connection from 1 to 5 pcs of C2105 temperature controllers and VM800 electrovalves and their power supplying. Built-in relay.