Description
The PKF-50 machine is an equipment designed for the automatic filling beer, cider, wine and for other carbonated or non-carbonated beverages into plastic kegs.
Operating capacity: kegs: 45 – 55 per hour (Polykeg®, Ecokeg®, Petainer®, Key-Keg®, Key Keg® Slim Line).
Designed to fill kegs which differs from kegs made from stainless steel, (beer, quiet wine, sparkling wine, beverages etc.) It is produced in the version for: Polikeg®, Ecokeg®, Petainer®, Key-Keg®, and Key Keg® Slim Line.
By using the same machine, you can use the simple keyboard on the control panel to fill different types of plastic kegs.
The set consists of a centering device (ferrule) and a head that adjusts to the type of keg system.The entire structure of the machine and the parts that are in contact with the filling liquid are made of AISI 304 and 316 stainless steel. The work phases are managed automatically. The only step that needs to be done manually: to put and remove the keg at the processing site.
TECHNICAL PARAMETERS :
CHARACTERISTICS :
Filling range: 10-30 l
Product: Wine-Beer-Similar liquids
Filling heads: 1
Accuracy of a counter of liter: ± 0.20%
Average accuracy of filling: ± 1.5%
Prevention against accidents: Protection in polycarbonate
Resistance to disinfection: Water-Chemical-Steam
PRODUCTION
Hourly Production (depends on the type of keg and the working cycle) 45/55
MATERIAL
Construction Material: Aisi 304 L stainless steel
Material which is in contact with liquids: Aisi 304/316 L stainless steel &
EPDM/PTFE/Silicone
DIMENSIONS AND WEIGHT
Height of a working table (mm) 850 – 870
Dimensions WxDxH (mm) 800x1000x2100
Weight (Kg) 315
ELECTRICITY
Installed power of the filler (kW) 0.5
Number of phases 3/pe
Voltage (Volt AC) 400
Frequency (Hz) 50
CONSUMPTION
Max. liquid flow rate (l/h) 3600
Max. product pressure (bar) 3
Air pressure (bar) 6
Air consumption (N l/minute) 62
Sterile air pressure (bar) 6
Sterile air consumption (N l/minute) 17
Nitrogen pressure (bar) 6
Nitrogen consumption (N l/minute) 113
Water pressure (bar) 3
Water consumption (L/h) 150
Water flow rate (L/h) 1800
Steam pressure (bar) 2
Sterilization steam (kg/h) 12
CONNECTIONS
Product Din 25
Discharge ½”gas
Compressed air ⅜”slide valve
Sterile compressed air ⅜”gas
NItrogen ⅜”gas
Sterilization steam ½”gas
Water ¾”gas
Electricity supply 3P+T 16A
WORK CYCLES
KEG
Firstly, put manually a keg onto a worktable. By lowering the press cylinder is the keg locked on the locking head.
PIPING (WASHING AND STERILIZATION)
The external washing of piping is done by water. The drying of the pipeline is carried out with a stream of N or CO2. Once this operation is concluded the piping is sanitized with steam.
PRE-FILLING CHECK
The filling valve opens and the internal pressure of the KeyKeg is checked to see if any valve is leaking or can damage the container.
PRESSURIZATION
N or CO2 flows into the keg – pressure is applied to the keg.
FILLING
Filling is controlled by an electromagnetic counter that can be set on the touch screen.
PIPING (WASHING AND STERILIZATION)
The external washing of piping is done by water. The drying of the pipeline is carried out with a stream of N or CO2. Once this operation is concluded the piping is sanitized with steam.
ENDING OF THE PHASE
By lifting the cylinder you can manually remove the full keg.
PRICE INCLUDES
- PKF-50 Plastic keg filler machine
- Stainless steel frame
- AISI 304/316 L stainless steel product piping
- Aisi 304 L : electrical panel
- 5-meter electrical cable
- Adjustable supporting feet
- Regulation of keg type
- Protections in polycarbonate with two front doors complete with sensors
- Possibility to fill sparkling and other products
- Keg-filling and washing function via PLC
- Touch screen
- Counter of kegs
- Filling with electromagnetic liter counter
- Electrical outlet for connection to the feeding pump
- External washing of the pipe union
- Steam sanitization of the pipe union
- Use and maintenance manual in Italian and English
| CODE | DESCRIPTION | PRICE € |
| 126K500 | PKF-50 : Compact counter-pressure machine to filling plastic kegs (one type of the head-kit is included) |
29.500,- |
| 126k502 | Additional head-kit for other type of the plastic keg (or another keg type which is not specified in description) | 600,- |
| OPTIONAL EQUIPMENT | ||
| 126k155 | Gas filter with stainless housing with 0.2um cartridge (air/N/CO2) | 1.500,- |
| 126k150 | Steam filter with 1×10 candle filter housing with 316 stainless steel cartridge | 2.100,- |
| 126k151 | Water filter in polycarbonate 1×500 and cartridge 0.65 um | 1.200,- |
| 13169 | Router for remote diagnostics, remote control, remote update etc. | 1.600,- |
| 126k156 | Alimentary mobile centrifugal feed pump 2.5 bar + by pass on cart (necessary for use with non-carbonated beverage products) | 6.800,- |
| 126k606 | Spare parts kit (set of recommended basic spare parts) | 1.500,- |
| 126k207 | Wooden crate for transport | 400,- |
Other optional accessories :
126k001 Modem + tele-assistance kit. compact ps … 600,00 Eur
126k502 head kit per PKF-50 (Key keg)… 590,00 Eur
126k503 Slim head kit for PKF-50 (Key keg) … 690,00 Eur
126k504 Polykeg A-head kit for PKF-50 … 600,00 Eur
126k505 Polykeg S-head kit for PKF-50 … 600,00 Eur
126k506 Polykeg D-head kit for PKF-50 … 600,00 Eur
126k507 Polykeg G-head kit for PKF-50 … 600,00 Eur
126k508 Polykeg M-head kit for PKF-50 … 600,00 Eur
126k509 Petainer A-head kit for PKF-50 … 600,00 Eur
126k510 Petainer S-head kit for PKF-50 … 600,00 Eur
126k511 Petainer D-head kit for PKF-50 … 600,00 Eur
126k512 Eco keg A-head kit for PKF-50 … 600,00 Eur
126k513 Eco keg S-head kit for PKF-50 … 600,00 Eur
126k514 Eco keg D-head kit for PKF-50 … 600,00 Eur
126k515 Eco keg G-head kit for PKF-50 … 600,00 Eur
Sales conditions :
| Offer validity | 30 days |
| Delivery conditions | EXW |
| Freight and Insurance | To be paid by the customer |
| Delivery | To be determined when placing the order |
| VAT | Not included |
| Terms of payment | 40% in advance when placing the order, 60% on advice that goods are ready to shipping |
| Assembly | Not included |
| PDI on our premises | Included |
| Technical/Start-up assistance | € 749,- per day, mechanical or electrical engineer (max. 10-hour working day) Day count: from the day of departure to the day of return. Payment in advance of the technician’s departure. |
| Travel, board and lodging | To be paid by the customer |
| Additional travel costs | Other additional travel costs, such as visas, tourist taxes, special requests etc., shall be charged at cost. |
| Phone assistance service or after sales e-mail | Customer service available during work hours: € 35,- to open a file € 70,- per hour, divisible in half-hours, cost of the technician € 100,- per hour for software modification service by an IT technician. |
| After sales service package | 6 half-hour visits at a price of € 240 + 30% discount on extra hours (valid for a year). |
| Warranty | 12 months for electromechanical and mechanical parts – The warranty is void if the damage is caused by the improper use of the system or by normal wear and tear. – The warranty is limited to the supply of a spare for the damaged part, which must be returned. Alternatively, the replacement shall be invoiced to the customer, and a credit note for the corresponding amount shall be issued upon receipt of the returned broken part. The following are not included under the warranty : – shipping costs – labour costs for the replacement of broken parts |
| CE marking and user manual | Our machines bear the CE marking in compliance with the relevant legislation. User and maintenance manual in Italian and English, available also in other languages on a paying basis. |
| Non-compliant goods | Complaints concerning non-compliant goods shall be accepted within the first seven calendar days after delivery of the same. |
| Packing | Standard stretch wrap Pallet, crate or special protections available upon request, at cost. |
| Excluded services | Unloading and placement of machinery Connection to the utilities Masonry works Anything not included in this offer. |
| Export certificates | Upon request when placing the order, we can issue the follwing certificates for goods delivered outside the EU: – Certificate or Origin by the Chamber of Commerce (certifies the nonpreferential origins of the goods) at a price of € 150,- per invoice. – Eur1 Certificate (certifies the preferential origins of the goods) at a price of € 150,- per invoice, with feasibility inquiry when placing the order. |
Video :
