CFL-3000IC : Automatic can filling line – capacity up to 3000 cans/hour

The automatic can filling line CFL-3000IC is fully equipped filling technology with the operation capacity up to 3000 cans  per hour

(the capacity is valid for 0.33L cans)

 

Our innovative beverage counter-pressure can filling line CFL-3000IC includes the monoblock unit CANLINE 12-1 EPV: This is the first dual lane counter-pressure linear filler available on the market.

This automatic monoblock counter-pressure filling machine with the can closure unit is able to fill and close up to 3,000 pcs of the 330ml cans per hour.

You can handle different size cans with this line. It is an extremely flexible & versatile machine. It is very simple to adapt the machine to use with each different diameter of cans in case of purchasing additional can handling parts (see the optional equipment) .

The CFL-3000IC filling line, thanks to the electro-pneumatic control of the filling valves, offers high-speed precision filling and, in the case of beer and cider filling, minimal disolved oxygene level.

Main operation steps of the machine :

1. Filling the cans with carbon dioxide from the external CO² pressurised supply tanks
2. A hermetic seal is then created between the can and counter-pressure filling valve
3. Flushing of the inside of the cans by creating a flow of virgin CO² to remove the oxygen inside the cans, and at the same time by extracting the oxygen via the degassing valve
4. Pressurising a second time the cans with CO² from the header tank on board the unit and balancing of the pressures between the can and the header tank
5. Counter-pressure filling is then performed
6. Once filling is complete, there is a stabilising pause to let the product settle inside the cans which aids in prevents foaming
7. Degassing bring the can back to atmospheric pressure

 

Characteristics of the filling machine :

■ Reliable calculation of the fill level using the length of the vent tube

■ Low-oxygen filling thanks to CO² flushing

■ Closed CIP circuit

■ Hygienic design

■ Electro-pneumatically controlled filling valve functions for maximum flexibility, which is managed by the operator on the main control panel.

■ Able to handle various size cans ranging from 150ml to 1000ml using the exhange parts (optional equipment)

■ Able to handle various size can ends (upper and lower lids) 200, 202, 300 using the exhange parts (optional equipment)

■ Twin lane header tanks independently operating allows one filling lane to be operating while the other is stopped for maintenance. This is a perfect function to contingency in case of fill valve failure to allow production to keep moving.

 

The can filling line consists of these components and blocks :

1. Depalletiser – Equipment for automatic loading of empty aluminum cans directly from pallets into the filling line.
2. Can drying conveyor with twisted cage – equipment for drying of the unpacked empty cans with air before the filling
3. CANLINE 12-1 EPV (Filler/Seamer) – Automatic monoblock machine for filling and closing the aluminium cans
4. Can labelling unit – Linear self-adhesive label applicator
5. Conveyor system – Motorised can conveyor system with can pack off/accumulation table end of line

The can filling line is designed to be easy operated and controlled only with one worker.

 

 

---

The can filling line consists of these main units :

De-palletiser

Equipment for automatic loading of empty aluminum cans directly from pallets into the filling line.

The standalone can de-palletiser is designed to utilise a small footprint whilst providing the ability for capacity of up to 10,000 cans per hour. Our de-palletiser offer the flexibility of easily and quickly, changing between can sizes without causing long delays on production.

• Fully automated sweep off system.
• Accommodate all pallet sizes.
• SEW Drives & Motors.
• SMC pneumatic controls.
• Full CE certification.
• Automated layer removal.
• User friendly control using the 4.3” touchscreen .
• Can accommodate all can sizes with simple sensor adjustment.
• Complete safety and interlock system.
• Date coder integration.
• Layer catchment module with a bin.

---

Can drying conveyor with twisted cage

Equipment for drying of the unpacked empty cans with air before the filling

---

CANLINE 12-1 EPV (Filler/Seamer)

Automatic monoblock machine for filling and closing the aluminium cans

 

• Isobaric (counterpressure) filling system with 12 automatic electro-pneumatic filling valves
• Product to be filled : beer, carbonated cider, wine, sparkling wine, carbonated lemonades, carbonated water, kombucha etc.
• Cans type : common aluminium cans – various size from 150ml to 1000ml using the exhange parts
• Filling capacity : Up to 3,000 cans / hour ( calculated for 330 ml cans )
• Filling temperature : recommended 0°C – 2°C for beer, cider
• Closure unit : 1-head can seamer
• All the machine components that are in contact with the product are in AISI 304 stainless steel or food-friendly plastic materials.

Filling unit description :

• 12 filling heads (electro-pneumatic isobaric filling valves)
• Automatic filling turret height adjustment
• Beverage product inlet complete with pneumatic butterfly valve.
• Upper tank provided with s/steel manometer and thermometer.
• User friendly 7” colour HMI touchscreen control panel & PLC
• 3 color light for status indication.
• Cans entry using an auger
• Cans handling using a star disc and external guides
• Gears in hardened steel and special plastic material which minimizes lubrication needs
• The beverage product is fed from above through central distribution, made of AISI 304 stainless steel
• Large diameter ball base bearing for rotation of the filling core
• Filling valves with automatic opening and the cans lifting jack
• AISI 304 stainless steel filling valves
• Adjustable level without replacing the parts
• CO2 injection before filling the cans and subsequent further injection of CO2 during the lifting and sealing phase of the filling valve, and automatic pressurization of the can
• Lifting jacks for cans, pneumatically powered. Pressure regulation is located in the electrical panel.
• Stainless steel level control probes.
• Predisposition for the normal sanitation cycle.

 

Improved design with many new and enhanced features including:

• Faster filling cycle
• Integral brushless electronic operation, for more accurate positioning of cans and faster servicingUser friendly 7” colour HMI touchscreen control panel & PLC
• Total control of cycles of machine through interactive touch screen
• Full internet connection for remote software technical diagnosis and assistance
• Easy visibility and access from all sides via transparent opening door for easy maintenance
• Flexibility to fill any size aluminium can
• Easy and rapid cans format changeover
• Material :Machine frame is made of stainless steel AISI 304 and machine support plate is made of painted iron covered with stainless steel AISI 304

 

Main parts of the CANLINE 12-1 EPV monoblock can filling and capping machine

Filling turret with electro-pneumatic counter pressure valves

Counter-pressure filling turret, supplied with 12 electro-pneumatic valves, suitable for filling carbonated products into aluminium cans.

• Automatic filling turret height adjustment.
• The filling turret has a twin tanks linear filling system with a mirror polished internal surface and an automatic level control probe.
• Fill level accuracy : +/- 2mm

Counter pressure filling with CO² flushing

The filler is suitable for counter pressure filling with CO² flushing for a true counter pressure of 3 bars.

The feeding mechanism works in a linear step -by-step mode and moves with 6 cans one after the other inside the filler in each lane. Six cans is placed under 6 filling valves during one filling batch.
Two parallel filling systems ensure a total of 12 filling valves and an output of 3,000 cans per hour in a controlled accurate fill way.

When all the cans have reached their correct filling position the valves descend down onto the cans creates a hermetic seal, and put them in direct contact with the filling valves, sealing the neck. At this point the filling cycles starts and does the following:

• Pressurising the cans with CO² from the external CO² pressurised supply tanks.
• Flushing of the inside of the cans by creating a flow of virgin CO² to remove the oxygen inside the cans, and at the same time by extracting the air via the snift valve.
• Pressurising a second time the cans with CO² from the filling tank
• Counterpressure filling with the beverage product is performed
• Stabilising pause to let the beverage product settle inside the cans and prevent foaming
• Degassing and snifting the cans

The system includes a very versatile snift process to release the CO² pressure inside the cans gradually before the cans are completely released and sent to the can closure unit. The CO² flushing kit allows our client to reach better levels of TPO (Total Packaged Oxygen).

Top view on the CANLINE 12-1 EPV monoblock :

 

Can lid distribution system :

• Number of the can lid distribution lines : two

Once filled the cans are moved away from the filler to the can seamer.

During this journey a lid dispenser positions one lid on each can that passes underneath it.
Just before picking up the lid it is possible to add a CO² under cover usibf the flushing device to eliminate any air inside the neck of the can.

In the upper part of the lid distribution units there is a revolving turret with 6 cylindric containers to lids feeding. The cylindric stock containers can be removed and refilled as the lids are used up. The cylinders are filled up off-line ready to be installed rapidly at intervals. Each cylinder can hold up to 200 lids each.
Extra kits of the cylindric containers for lids are available for sale as optionals to reduce stoppage time between refills.

 

Can closure unit (the can seamer)

When the can with the lid (now correctly in position), is positioned just under the seaming head, a pneumatic piston lifts the can up, while the two seaming rollers move in to seal the can end to the can body.
Now the can is ready for packing.

 

Water shower in output from the monoblock :

 

---

 

General characteristics :

Structure :

• Material AISI 304 stainless steel
• Large doors for inspection and internal light for routine maintenance.
• The frame structure has been designed to allow an easy disposal of liquids poured in it.
• The basic structure accommodates: input auger, transfer star, conveyor
• Supports, in Aisi 304 stainless steel, with adjustment for machine leveling

Mechanical characteristics :

• The transmission unit is located inside the base structure and is formed by a main gear made of high-strength steel, which ensures efficient and silent movement of the cans; distributes movement to the whole system.
• The main control gear distributes the movement to the whole system.
• The gear of the star for transferring cans at the input is built with a special plastic material to avoid noise and needs for lubrication. All other gears are made of steel.

Lubrication system

• Mainly the machine is self-lubricated. The few internal / external and upper points of the machine can be greased without any contact with the beverage product.

Pneumatic system

• The centralized pneumatic system controls the lifting of the cans using the pneumatic lift jacks and is equipped with pressure regulation, filter, lubrication with compressed air and air supply to the cans capping unit.

Security functions

• The machine is equipped with safety protections according to CE standards
• The frames of the panels are made of AISI 304 stainless steel, the windows are made of a special transparent plastic material.
• There are small openings at the entrance and exit of the conveyor belts for handling cans.
• During operation, any opening of a door stops the machine.

 

Remote assistance via internet

Interactive HMI interface in PLC for onsite production progress monitoring, production management & control and remote assistance.

The system allows our technician to be directly in contact with our customers in case of problems.
The bi-directional communication between the machine and remote system permit to see in real time if the operator is working in the correct way on the touch screen, and can be used to control the machine from our side for real time intervention (if necessary, for the customer´s demand).

---

---

Optional devices :

---

Can labelling unit

Automatic linear labeler with one single labeling station to apply self-adhesive labels on cylindrical containers by means of a new patented labeling system with opposing rollers. Designed especially for containers with low physical resistance to pressure, such as aluminium cans.

Technical specification :

Designed to be used with	cylindrical cans or bottles
Container´s diameter	from 55 up to 120 mm
Container´s height	max. 350 mm
Hourly production capacity	max. 4000 pcs per hour (valid for diameter 55 mm)
Labelling tolerance	max. 1.5 mm
Number of label stations	standard = 1, maximal = 2
Paper passage	170 mm
Max. diameter of label´s reel	280 mm
Min. label´s width	20 mm
Marking unit	optionally
Foil dispenser	no
Smoothing unit	no
Motorization	Three-phase motors
Pneumatic supply	4-6 bar, consumption 50 liters/min
Power supply	3-phase 380-420V/ 50/60 Hz + null
Power consumption	0.8 kW
Packaging	Wooden crate (not included in price)
Dimensions	225 x 85 x 190 cm
Weight netto	200 kg
Machine is mounted on wheels

 

---

Packing unit (Wraparound carton packer)

machine for packing the full cans into carton packages

Technical specification:

• Automatic wrap-around case packer with in line infeed
• Sliding protection doors with deceleration device.
• Blank magazine at fixed height, equipped with motorized conveyor.
• Photocell for stock of cardboards.
• Blank magazine capacity: 300-400 pcs.
• Open cardboard dimensions: min 300×500 mm max 750×1300 mm – min 11.81″x19.69″ mm max 29.53″x51.18″ mm.
• Cardboard thickness: 3 mm.
• Automatic pack collation
• In line infeed conveyor with adjustable speed controlled by Inverter.
• One-row or multi-row infeed.
• Photocell for infeed conveyor speed change.
• Product presence photocells.
• Accumulation/control rows photocells.
• Cardboards pick-up by means of an oscillating arm with suction cups, driven by a gearmotor and controlled by inverter.
• Automatic positioning of the cardboards pick-up and release point, driven by gearmotor and controlled by encoder and inverter.
• Cardboard positioning on the polizene guides, without contact with the transmission chains.
• Electronic forming unit driven by 4 gearmotors controlled by inverter and encoder, with automatic adjustment of the carton depth.
• Pneumatic side vanes to guide the cardboard flaps.
• Load of the product into the open U-shaped carton with double 2 cartesian axis motorized pusher controlled by 4 servomotors.
• Gate with pneumatic movement with opening function and guide of the products.
• Closure of the inside lateral flaps by pneumatic actuators.
• Folding of the upper part of the cardboard by means of fixed contrast.
• Motorized transversal Hot melt glue applicator, controlled by inverter and encoder.
• 4 longitudinal fixed gluing points.
• Closure of the external flaps and squaring of the finished case by pneumatic actuators.

Flxmod® control system equipped with:

• Operator Interface 7″ full-colour touch screen sliding all along the length of the machine
• PLC control system
• Inverter with integrated encoder reading
• IN/OUT control modules
• 50 different memorisable working cycles
• 4.0 industry compliant
• Designed and manufactured according to CE regulations.

 

Accessories :

Optional :

• Guide for multi-lane system 2/3 lanes.
• Format change.
• Divider.
• Guide for multi-lane system, for divider, 3/4 lanes.

Technical specification :

• Power supply: 400V 3 PH+N+PE; 50 Hz.
• Max. absorbed power: 9900 W.
• Compressed air pressure: 6 bar – 87 psi
• Required air: 17 nl/pack.
• Maximum pack height: 350 mm – 13.78″
• Minimum pack height: 75 mm – 2.95″
• Production: up to 25 ppm
• Machine dimensions: mm 4720 x 2290 x 2150-2310h -185.83″ x 90.16″ x 84.65″-90.94″
• Working height: 945-1105 mm – 37.20″-43.50″

Characteristics of the infeed products:

One infeed lane, for round, square and irregular products

• max width 280 mm – 11.02″
• max length 350 mm – 13.78″
• max diameter 280 mm – 11.02″
• min diameter 40 mm – 1.57″

2 infeed lanes, for round products only:

• max diameter 140 mm – 5.51″
• min diameter 40 mm – 1.57″

3 infeed lanes, for round products only:

• max diameter 90 mm – 3.54″
• min diameter 40 mm – 1.57″

Recommended working temperature: FROM +10 C° TO +35 C°; beverage product >+10 C° – FROM +50 °F TO +95 °F, PRODUCT >+50 °F enviromental humidity: MAX 70%

Recommended carboard quality

• Corrugated cardboard: 3 mm thickness
• Outside cover in test paper from 150 to 180 g/m²
• Inside cover in test paper from 120 to 140 g/m²
• Central waviness in medium paper from 130 to 150 g/m²

Glue specificatons :

• Adhesive type: hotmelt.
• Viscosity at 170°C: 900 – 1100 mPas.
• Glue sticking time: short.
• Open time: medium.
• Working temperature: 150 -190 °C.

---

Price list :

BASIC CONFIGURATION
DESCRIPTION	PRICE IN EURO
Automatic depalletiser (bottles / cans)	55000,-
Can drying conveyor with twisted cage – for one cans type	11250,-
CANLINE 12-1 EPV – the counter pressure can filling and capping machine (monoblock)	185000,-
Dummy bottles/cups for CIP cleaning – for filling valves & return to CIP tank	3520,-
High temperature washing kit at 85 ⁰C for use of the hot caustic chemical solution in the CIP process	included
Photocell signallizng the can accumulation at the outlet and activating the can input stop	835,-
Motorised can conveyor system with can pack off/accumulation table end of line	25000,-
Optional equipment
Linear can labelling unit	21780,-
Packing unit – with parts for one carton pack format	155520,-
Cans conveyor system – real price will be calculated after the final layout will be confirmed with client	on demand
Control panel for the cans conveyor system – real price will be calculated after the final layout will be confirmed with client	on demand
Cables and cable trays – real price will be calculated after the final layout will be confirmed with client	on demand
Total price of the filling line without the labelling unit and without the packing unit	280605,-
Total price of the filling line with the labelling unit and without the packing unit	302385,-
Total price of the filling line without the labelling unit and with the packing unit	436125,-
Total price of the filling line with the labelling unit and with the packing unit	457905,-

 

OPTIONS FOR THE CANLINE 12-1 EPV MONOBLOCK
DESCRIPTION	PRICE IN EURO
Liquid nitrogen dosing system (recommended when filling non-carbonated products)	39500,-
Product non-return valve	220,-
Spare gaskets for the 12 filling valves	1200,-
Fobbing device prior to lid application – hot water to be supplied by the client (x2)	3000,-
Spraying device after output from the can seamer to wash external surface of the cans from an excess foam	1370,-
Modem with Ethernet connection for remote software assistance	2000,-
Parts to handle additional format of cans with the same lid	4000,-
12 additional fill level tubes – required for each additional required filling level	780,-
Parts in contact with the beverage product in stainless steel AISI 316	2800,-
2x exchange parts for the can seaming unit for closing additional lid formats (includes can seaming tools, chute and complete automatic revolving can lids loader with 6 stations – each for prepacked cartridges with lids)	14000,-
Sanitary screw for the product feed pump with all pipe connections	4500,-

 

---

Sales conditions :

Payment : 50% advance deposit with signed order, balance prior to shipment of goods.

Delivery time : Usually 5 calendar months EXW – since receipt of order & payment of 50% advance deposit payment and delivery of all samples and technical details a computations (excluded August & December).

Packaging : Not included

Delivery costs : Not included

Installation : Not included

Warranty : 12 months. It is excluded from the warranty the materials of normal wear, damages due to incorrect use, due to carelessness or missing maintenance and damages caused by modifications not effected by our technicians. Are also excluded the electrical materials, subject to their own manufacturers’ warranty (see full trading terms enclosed for details of warranty).

Excluded :

• Connection to other devices
• Supplementary equipment and optionals if not included in the price
• Machine positioning
• Building structures and their modifications
• Inspection certificates issued by approved control agencies
• All what is not clearly mentioned in the offer

 

Optional services :

I. Installation work on the place …. € 850,- /  day + travel, board & lodging costs

The price is valid for all countries of the European Union. The price includes ten days work (+ two days travelling) of two specialists on the place – assembling and start up of the equipment.

The price does not include : transports costs and accomodation of the workers. Will becalculated individualy.

 

II. Installation work ensured by customer (with our remote assistance) …. € 850 / day

Do you want to save your money ? Are you technically skilled and not afraid of challenges? Do your country’s hygienic restrictive regulations not allow a visit of a specialized technician from a foreign country? Don’t be afraid to use the remote assistance service.

 

How is the installation of the filling line by our customer, using our remote assistance?

1.) The customer positiones all the machines and connects them to power guided by our checklist.

2.) Once photos were sent of the completion of the preliminary phase we proceeds with the start up and commissioning.

3.) First we connects the PLC of the machine via internet to our service console in our factory — this allows our service manager to view and control your PLC on a remote screen, as if he was in front of the machine in person.

4.) We then organise a Microsoft Teams conference call, with one your worker holding the camera, and the others working around the our technician´s instructions.

5.) After only 3-5 days setting up and configuring, first full glass bottles or cans will leave your filling line.

 

---

 

---

General sales conditions :

This document is subject to final confirmation after receipt of samples of the bottles, labels, caps, capsules and information on all raw materials to be processed. Following conditions are applicable unless otherwise stated in the above document.

 

1. General Principles
These terms and conditions of sale shall be applied unless otherwise specified in an agreement written by the seller and the customer (herein referred as the “Buyer”). When a Buyer sends an order, it implies full acceptance of these Conditions of Sale and supersedes any previous offers, correspondence and quotations between the Parties.

2. Sales Contract
The Seller shall be bound to abide solely by the terms specifically set forth in the present document. The Parties are bound to respect the terms of the Conditions of Sale only after the Seller has accepted the Buyer’s order in writing, in the form of a confirmation of receipt of the order.

3. Prices
Prices are “EX-WORKS”, VAT is not included. The quoted prices do not include shipping, insurance or packing. These items will be calculated separately.
Prices are established on the basis of economic and financial conditions as of the date of the quotation.
Prices are quoted for Products only and do not include technical data, or patent or proprietary rights.

4. Delivery
4.1. Delivery terms shall be calculated as of the date of the confirmation of the receipt of the order.
Delivery time is subject to receipt of the payment to deposit account, samples necessary for the construction of the equipment and technical details. In any event, if the order is suspended, after that date, for any of the following reasons such as non-payment of invoices, lack of approval of drawings, non receipt of samples or prototypes, transfer of export or import licenses, credit facilities, etc., the delivery date shall be considered as of the date said conditions are fulfilled.
4.2. The delivery date indicated by the Seller shall be considered an estimate. Unless specifically agreed otherwise by the Seller and Buyer, missing the delivery date shall not be cause for cancellation of the order or entitle the Buyer to any indemnification.

5. Force Majeure
Any conditions of force Majeure shall be cause for the Seller to suspend its commitments until said conditions shall cease to exist. The following conditions shall be considered force Majeure to the terms and conditions of sale: any unforeseeable circumstance the effects of which could not be reasonably prevented by the Seller and which are of such nature as to prevent the Seller from fulfilling its obligations.
The following conditions constitute force Majeure : fire, flood, interruption or delay in transportation, shortcomings on the part of a supplier or subcontractor, strikes of any kind, machine breakdowns, epidemy, goverment restrictions etc.

6. Insurance and Transportation
The goods shall be shipped at the buyer’s risk. The buyer shall be responsible for inspecting the goods upon arrival and, if necessary, advise the shipper of any damages. Upon receipt of specific instructions from the Buyer, shipments may be insured by the Seller who will then bill the buyer for the insurance costs.

7. Installation & Setting up
In case that assembly and start-up operations are requested, the Seller will guarantee the execution of the plant assembling and start-up in the lowest possible time, at prices indicated in the standard tariff unless otherwise specified in the present document. Seller´s technicians will start assembling work after a communication with the Buyer who confirms that the machines arrived on site in good condition, that the eventual preparing operations have been carried out and that all rooms and relative utilities in place have been finished in accordation with the Seller´s requirements (building works, piping and electric nets). It is understood that at technician/s arrival the necessary manual labour, all lifting and movement means will be at disposal as well as the necessary work-shop equipment and needed tools.
The Buyer will prepare and ensure :
• the area provided for the installation and the appropriate access routes free from stored materials or equipment;
• the necessary mains supply requirements such as water, steam, inert gas, product, electrical connections, compressed air, etc. available at the specified predetermined user points.
• the necessary handling equipment (forklifts, cranes, etc.) to discharge, to allow site positioning and handling of equipment and materials on site and the necessary personnel dedicated to such tasks.
• placing the products and all required raw materials on site in sufficient quantity for conducting the necessary equipment tests.
If the installation is not carried out or will be prolonged, due to delays whether attributable to the Buyer, then the Seller will charge the Buyer the costs related to technicians’ time at an hourly rate prescribed in our intervention tariff, and also the cost of expenses incurred for travel, food and lodging.
Furthermore, the Buyer’s staff, appointed to control and maintain the equipment, must co-operate with the Seller’s technicians for the assembling operations and to receive training.
Installation, start up and commissioning of the equipment are at the expense of the Buyer who will be charged the cost of technical assistance provided at our standard rates and terms and conditions (details provided on request and may vary depending on the country of destination).
During the commissioning of the system, the technical personnel of the Seller will carry out various routine tests on the equipment which may cause a certain amount of product loss. The Seller will not be held responsible for such losses and will not be liable for any claim of compensation.

8. Conditions for Acceptance on the part of the Buyer
8.1. Product features shall be those published in the most recent edition of the manufacturer’s specifications, unless other features are specifically agreed upon between the Seller and the Buyer.
8.2. The output capacity of the Products described in the present document result from an average calculation carried out with similar product characteristics or as a result of a theoretical calculation, unless otherwise specified. The Seller will advise the Buyer about the real effective capacity after having trialled the Product with the sample Products supplied by the Buyer. In the case that product samples are not supplied by the Buyer, the Seller shall not be responsible for properties different from the values stated in the offer.
8.3. The Seller’s goods are subject to tests and inspections in the factory where they are manufactured. The Buyer is entitled to request that the goods be inspected in his presence. If the Buyer cannot attend said inspections after having been given the agreed, advance notice of the date by the Seller, the Seller may send the
Buyer the inspection report that the Buyer will accept without discussion.
8.4. In order to be accepted to the provisions of this paragraph, all claims regarding the goods supplies shall be prepared according to the instructions provided by the Seller and contained in the documents sent with the goods.
8.5. No goods may be returned without prior authorisation from the Seller.
8.6. When a return of goods is accepted by the Seller, the Seller shall have the option to repair or replace the item(s) or to issue a credit note for the items acknowledged to be defective. In any event, the Buyer shall not be authorised to consider the return of goods, to suspend any payments due to the Seller, nor to cancel all or any part of any still pending order.

9. Payment Terms
Payments to the Seller covering price of the goods and related services supplied shall be effected according to the conditions set forth on the present quotation or order confirmation and the invoice. In the event the purchaser does not pay an invoice or part of it, the Seller shall be entitled, without prejudice to its other rights, to suspend all deliveries, irrespectively of the terms of the order(s) until full payment is received.

10. Title
Notwithstanding the effected delivery to the purchaser, the goods shall remain the property of the Seller until full payment is received. In the event that the purchaser does not effect payment by the established date, the Seller may repossess back already the delivered goods. In any event, as specifically stipulated, the purchaser shall be responsible for all damages and losses that may occur after delivery.

11. Warranty
The Seller engages to try solving all eventual defects coming from designing, production and assembling defects, guaranteeing the regular running of the supplied equipment for a period of 12 months from the date of shipment, if not agreed different time.
The warranty does not include normal wear and tear , and break downs due to an incorrect or improper use, to lack of diligent maintenance and to the non observance of technical descriptions as well as instructions indicated on the hand books which will be supplied to the Buyer. Warranty is limited to mechanical parts which are not subject to wear and does not include electric and electronic components, as per international guarantee regulations. Defective parts under guarantee must be returned to the Seller for examination and assessment of the defect, for the Buyer´s costs.
Replacement of damaged parts will occur after the manufacturer’s examination and confirmation of the damage of the returned defective component.
Replacing the components with non original parts by the Buyer or his customer shall invalidate the warranty unless such replacement has been specifically permitted by the Seller in writing. Spare parts supplied under guarantee are delivered free of charge EX-WORKS. All expenses for shipment of such parts from EX-WORKS to destination, including our technician’s travel, food and lodge are at customer charge. The Seller’s own technician labour for installation of spare parts under guarantee is free of charge. Any intervention carried out on the Seller’s equipment by the Buyer or by third party technical personnel are only for customer’s charge and responsibility. Modifications or interventions on the equipment may invalidate the guarantee terms unless explicitly authorised by the Seller.

12. Transfers
By virtue of this document, any transfer by the purchaser of any contract without prior makes agreement from the Seller shall render the contract null and void and shall relieve the Seller of any future obligations.

13. Court of Jurisdiction and Applicable Laws
In the event of judicial proceedings, the rights, obligations and claims of both parties will be decided by a court in a European country and city chosen by the Seller, irrespectively of the agreed upon terms of sale and payment, as well as warranty problems or in the event of multiple defendants.
The agreement and any difference or dispute arising out of it or related to it shall be governed, construed and interpreted in accordance with the Laws of Czech Republic. If any dispute, difference in opinions or question shall arise between the Parties under or in connection with the Contract, including any dispute on the validity of the Contract, such dispute, difference or question shall be finally settled by arbitration under the Rules of Arbitration of the Ministry of commerce of Czech Republic as in force and effect at the date hereof by one or more arbitrators appointed in accordance with the said Rules. The language to be used in the arbitrate proceedings shall be English. The seat of arbitration shall be Opava, Czech Republic. The decision of the arbitrators shall be final and conclusive and shall be binding on the Parties.

14. Compliance with Safety Regulations
The Equipment is built according to the European CE regulations. It is the duty of the Purchaser to inspect all Products and to provide proper safety devices to safeguard the operators from harm and to ensure compliance with all Safety Regulations. By accepting the “Order Confirmation”, the Purchaser acknowledges and agrees that the goods may not include or require the necessary safety equipment to permit safe operation or comply with Local, State, Federal, Industry and/or other applicable Safety Standards or requirements which may be different from the CE regulations. Before placing the equipment in operation the Buyer agrees to utilise such safety equipment and will give operators such instructions and/or warnings as necessary to permit safe operation and to comply with Local, State, Federal, Industry and/or other applicable Safety Standards or requirements. Purchaser further agrees to indemnify and hold Seller and their officers, employees harmless from any and all liability which may be imposed upon Seller and any and all costs, including attorney fees, incurred as a result of any claim made against Seller for injury arised out with the Products, that was caused or contributed to by purchaser’s or user’s failure to provide safety equipment and/or instructions and/or warnings necessary to operate this Products safely.

15. Instruction manuals:
The instruction manuals, assembly manuals, operation manusls, maintenance manuals are supplied exclusively in English language.