BVP-250 : Brewhouse vapor condenser with the heat recuperation

This equipment is used for condensation and removal of vapors generated in boiling equipment during the brewing process.The vapor condenser BVP-250 allows suction of vapor from the container by ventilator and subsequent condensation in a tubular heat exchanger. From the heat exchanger then goes only condensed liquid of substantially lower temperature, which do not shorten the lifetime of the waste-pipe of the brewhouse. Drinking hot water (as coolant) outgoing from the heat exchanger is able to be collected in the hot water tank for later use.

Brewhouse vapor condenser BVP-250 is an additional component intended for these types of boiling equipment :

• BREWORX CLASSIC  with volume  150 – 250 liters
• BREWORX LITE-ME    with volume 150 – 250 liters

The main advantage of this system of condensation is significantly lower water consumption compared to conventional process of condensing vapors using condensing nozzles.

Vapor condensator consists of two parts : the ventilator fitted with an electromotor Siemens and of the tube heat exchanger.

The entire condensator is made out of stainless steel no. 1.4301 (AISI-304).

Technical parameters:

• Width                                            800 mm
• Height                                           1 200 mm
• Depth                                            400 mm
• Weight                                           40 kg
• Connection suction valve              DN100
• Inlet coolant piping                        DN25
• Outlet coolanr piping                     DN25
• Drain piping                                   DN25
• Temperature sensor                      6mm
• Electric motor                                Siemens 1LA7070 400V 0.37 kW

Warranty:

• Vapor condenser – stainless body      36 months
• Electric motor Siemens                      24 months
• Electric installation (wiring)                24 months