Name: BCFL-MB1500TP : Automatic counter pressure filling line for 1500 bottles or cans per hour with a tunnel pasteurizer
SKU: BCFL-MB1500TP-1
Availability: InStock

Description

The automatic bottle and cans filling line BCFL-MB1500TP is fully equipped filling technology with the production capacity up to 1500 bottles or cans (0,33L) per hour, with a tunnel pasteurizer. It consists of these components and blocks :

Automatic monoblock machine for rinsing, filling and closing the aluminium cans
Set of parts for the rinsing, filling and capping the glass bottles in the main automatic monoblock – the set changes a functionality od the main monoblock machine to use it for operations with glass bottles.
Special CIP bottle for full cleaning and sanitizing the machine in closed circuit.
High temperature washing kit for the hot internal cleaning of the machine at 85 ⁰C using a caustic solution.
Linear labelling unit for application of paper labels on the cans and bottles.
Photocell to avoid bottle/cans jam out in the labelling unit.
Coder integrated into the labelling unit to printing the filling day date.
Tunnel pasteurizer
Drying tunnel
Carton sealing machine with the PVC tape
Semi-automatic pallet wrapper
The CIP system
Rotary table to inserting the cans or bottles.
Rotary table to full cabs/bottles accumulation before unloading (Ø800mm).
Conveyor system to connection of all units each other.

The bottle and cans filling line is designed to be operated only with one worker.

Operation capacity:
– Up to 1200 pcs of the 0.5 lt bottles or cans per hour
– Up to 1500 pcs of the 0.3 lt bottles or cans per hour

Scheme and dimensions of the fully equipped system for cans and bottle filling:

Scheme and dimensions of the fully equipped system for cans and bottle filling, including the tunnel pasteurizer :

Technical parameters

Beverage product: Carbonated beverages like beer, cider, sparkling wine etc.
Type of bottle: Glass bottles and aluminium cans
Type of closure the bottles: Crown caps Ø 26 mm or ROPP caps (according to customer´s choice – optionaly both types of the caps)
Type of closure the cans : Cans seamer
Number of bottle rinsing positions: 6
Number of bottle filling valves: 6
Number of bottle capping heads: 1 + capping head for cans (cans seamer)
Rinsing system: by water – with single stage water treatment
Filling system: electropneumatic, isobaric filling valves
Filling temperature: 0-2°C
CO2 content: Max 5,5 g/lt.
Pressure: Max: 2.0bar – 2.5bar
Bottle standard dimensions: Diameter min. 50mm/max. 100mm, height min. 180mm/max. 340mm
Machine rotation: Clockwise
Speed adjustment: electronic, by frequency inverter
Photocells with automatic start/stop system: positioned at inlet and exit
Recommended minimal floor space : L x W : 8000mm x 6000mm
Output capacity: up to 1500 bph (bottles 330ml) / up to 1200 bph (bottles 500ml)

The bottle/can filling line consists of these main units :

I. Automatic monoblock for the rinsing and filling the bottles/cans

A high quality monoblock machine designed to rinsing and isobaric filling the aluminium cans or glass/aluminium bottles. Long lifespan thanks to our special double degassing of oxygen, with six electropneumatic filling valves for the rinsing and filling processes.

Operation capacity:
– Up to 1200 pcs of the 0.5 lt bottles or cans per hour
– Up to 1500 pcs of the 0.3 lt bottles or cans per hour

The machine includes :

6-valves rinsing unit for the bottles and cans
6-valves filling unit for the bottles and cans
Lids applicator for the cans
Seamer for closing the cans

Main features:

Rinsing unit :

Rinsing unit, supplied with six grippers with standard fixed nozzles.
The cans/bottle gripper pads can be easy extra-rapid assembles and disassembled.
The cans/bottle rinser modul is supplied with a single stage rinsing water treatment
Electro-valve to automatic control the rinsing fluid. The valve stops the reatment fluid flow every time the machine stops and starts it at the machine re-starting.
Manual turret height adjustment

Filling unit :

Counter-pressure filling unit, supplied with six electropneumatic valves suitable for filling beer into glass bottles and into alluminum cans
Manual filling turret height adjustment for use the turning turret for seaming cans
The filling turret has a tank with a mirror polished internal surface and a level control probe
Filling level accuracy +/- 2mm

Cans seamer :

Inlet for rinsing water and CO² provided with globe valves made in stainless steel.
Product inlet complete with pneumatic butterfly valve.
Panel with s/steel manometer and pressure regulation for lifting jacks and counter pressure in the upper tank.
Upper tank provided with stainless steel manometer and thermometer.
Vacuum gauge on the vacuum tank.
User friendly Omron 7” colour HMI touchscreen control panel & PLC
3 color light LEDs for status indication.
Hugely improved design with many new and enhanced features including:
- Faster filling cycle
- Integral brushless electronic operation, for more accurate positioning of cans and faster servicing
- User friendly Omron 7” colour HMI touchscreen control panel & PLC
- Total control of cycles of machine through interactive touch screen
- IoT Smart Device: Full internet connection for remote technical diagnosis and assistance
- Easy visibility and access from all sides via transparent opening doors for easy maintenance
- Flexibility to fill any size of aluminium cans
- Easy and rapid cans format changeover

II. Automatic machine for the labelling the bottles/cans

Automatic bottle/cans labelling unit for applying self-sdhesive labels. Automatic linear labelling machine equipped to apply one self adhesive label on glass bottles or cans. For bottles with maximal diameter 300mm.

Capacity up to 1500 bottles or cans per hour.

Label minimum length: 10 mm
Label maximum length: 130 mm
Label minimum height: 10 mm
Label maximum height: 80/120/160/240 mm
Container minimum diameter: 40 mm
Container maximum diameter: 130 mm
Container minimum height: 150 mm
Container maximum height: 370 mm

Base Frame and General Structure

The support frame is made of welded steel profiles and is equipped with height adjustable feet.
The top surface is a carbon steel plate, covered with AISI 304 stainless steel metal sheet.
Inspection is possible through side doors and frame side skirting clad with AISI 304 stainless steel plate.
Standard machine colour: RAL 7038.
Machine prearranged to install a second labelling station in the future.

Self-adhesive labelling station

Machine equipped with one self-adhesive labelling station installed on vertical slides easy adjustable composed of:

Stepping motor
Drive and control microprocessor pre-disposed to operate the printing unit (optional)
Dragging rubber roll with contrast roll mounted on springs
Labelling tongue for labels of 80/120/160/240 mm height
Supporting reel plate Ø 320mm equipped with unwinding shaft
Motorized labeller paper re winder
Bottles detection photocell
Label detection photocell
Drive buttons included in the group
Box containing drive and electrical parts in stainless steel, with open able access panel complete of lock general switch
Manual adjustable stainless-steel support system, complete of digital indicator for an easy adjustment
Maintenance and lubrication easy and short time requiring due to the high quality of components and materials used
The machine has been designed to have maximum accessibility for cleaning and debris removal purposes

Safety guards

Safety guards are present along the whole base frame perimeter.
Guards are made in AISI 304 stainless steel with transparent material windows. Openable doors are fitted with interlock type micro-switches.
Main gear box is of crown-screw worm type and oil bath lubricated.
Feed screw transmission systems are complete with safety electro-mechanical clutch devices to stop the machine in case of bottle jamming.

Wiping system

Labels wiping by sponge rollers.

Machine control system

Pneumatic plant is complete with pressure regulation unit, air filter and air lubricator.
Main electrical panel, waterproof type, is integrated in the machine structure.
All machine controls and status/signal lights are centralized on a single operator panel, complete with removable push-button station (emergency stop + pulse motion buttons).
Machine infeed automatic closure in case of bottles build-back at discharge side.
All electric and pneumatic power and control circuits are built in accordance with the latest applicable international standards.

Anticorrosion treatment

Use of materials not subject to corrosion as stainless steel, not-ferrous alloys and plastic materials.
Carbon steel parts undergo an anticorrosion treatment by multicoating epoxy painting.

DATE CODER

Display : 2,8″ full color LCD
Plug´n Play design : Hewlett Packard TIJ 2.5 printing technology
Printable images : Alphanumeric , logo, date/time, expiry date
Printable lines : 1,2,3,4 lines. Total line heigh is limited to 12.7 mm
Conveyor speed : 76 meters per minute

III. Automatic machine for the capping the bottles

The one-head automatic capping unit with maximal throughput 2.700 bottles per hour, is suitable for the application of aluminium caps on cylindrical glass bottles with diameter between 30 mm and 115mm and height from 160 to 355mm.

The crown caps (or optionally other types of the caps) are dosed through automatic vibration feeder directly on the bottles.

The capping head is operated by an electrical motor mounted on a slider with expansion pulley allowing increase or reduce the rotation speed of the threading head sinking on the caps to be closed through a special plastic cam working at the centre. Therefore distributing the loads is in a balanced way and guaranteeing a long life.

The change of the parts and the height adjustment are rapid and simple, the head lifting is mechanical and happens manually through a hand-wheel operating on the endless screw reducer; special safety devices stop immediately the machine in case of problems to avoid breakages the bottles and any other anomalies.

Capping the bottles with crown corks on the pneumatic capping turret equipped with the large capacity crown caps feeder
Capping the cans with aluminium caps on the rotary seamer
Automatic vibrating sorter, made of AISI 304 stainless steel; equipped with device for monitoring caps level in the stack
Chute equipped with cap presence monitoring device, made of AISI 304 stainless steel
Capping head with pressure-closing cone for permanent crown cap deformation.
Device to removing beer foam before capping – it removes oxygen from the bottle neck.

Optional equipment (prices on request) :

Revolving unit with two types of heads mounted on the same turret.
Special heads for : screw corks, mushroom corks, wine corks, plastic caps.

IV. Rotary tables for the manual loading and unloading the bottles/cans

V. Conveyors for transporting the bottles/cans between all units

The complete conveyors set made in AISI 304 stainless steel, with wear-proof plastic rollers and sliding profiles.
Table top type conveyor belt, AISI 304 stainless steel (or Delrin) made.
Bottles are guided by stainless steel plus plastic contact profiles side guard-rails, adjustable in width.
Infeed device to space out the bottles/cans by pneumatic lever.
Infeed device to center the bottles/cans before every operations with micrometric adjustment in width by hand wheel.
Device to stabilize the bottles/cans during the labelling and wiping with micrometric adjustment in height by hand wheel with synchronized speed to the one of the conveyors.
The infeed gate lock device can be manually or automatically operated.

1st operation : Loading the bottles or cans on the infeed rotary table (may be replaced with a infeed conveyor)

The cans and bottles are manually loaded on the rotary input table, then they are automatically transported with a conveyor to the main monoblock to be ready for the rinsing, filling and capping .
The input rotary table may be optionally replaced with a conveyor that transportes the bottles and cans from other machine.

Infeed rotary table for manual loading the bottles and cans – diameter 800 mm

2nd operation : Labelling the bottles (and cans, if is needed)

The cans and the bottles are transported with the conveyor to the labelling unit to applying self-sdhesive labels.

3rd operation : Rinsing the bottles or cans on the rinsing turret equipped with six grippers

The cans and bottles are spaced by an infeed snail to allow the rinser’s pincers to pick them up.
Once the cans or bottles are in the correct position , they are picked up by the pincers and upturned to the rear section of the rinser, where they are rinsed with the water jets.

The drain water is collected via a collector under the jets, and the then may be drained away or recycled, filtered and re-used as required (optional kit extra is needed).
After the rinse cycle is completed the bottles and cans are re-positioned onto the conveyor belt and the infeed snail moves them over towards the filling unit.

4th operation : Filling the cans and bottles on the filling unit equipped with electropneumatic counterpressure valves

The filling unit is suitable for counter pressure filling the bottles and cans with carbonated beverages, with CO² flushing, with a counterpressure up to 3 bars.

The feeding mechanism works in a linear step -by-step mode and moves six bottles or cans one after the other inside the filling unit to be positioned one bottle/can to each filling valve.

When all six bottles/cans have reached their correct filling position, the pneumatic cylinders under each valve lift the bottles/cans and put them in direct contact with the filling valves, sealing the neck.

Phases of the bottle filling process (valid also for cans)

1st phase	First pre-vacuumation	After the lifting of the bottle, the vacuum pump starts - exhausting air from bottle
2nd phase	First CO2 injection	The vacuuming pipe is closed and the injection of CO2 starts - filling bottle with CO2
3rd phase	Second pre-vacuumation	The valve for the CO2 closes and the vacuuming pump starts - exhausting CO2 from bottle
4th phase	Second CO2 injection	The vacuum pipe stays open for a very short time while the CO2 is opening and then it is closed
5th phase	Filling the beverage	When the pressure inside the bottle is the same as the pressure in the upper filling tank the filling valves is open and the filling process of the bottle starts
6th phase	End of filling	When the filling of the bottle is finished, after a short pause, the snift is open for degassing of the bottle
7th phase	Degassing	The electro mechanical valve opens and degasses the bottle

All of the above mention cycles are adjustable and recordable in the PLC so that they can be verified and used in future.

5th operation : Capping the bottles and cans

Capping the bottles with crown corks on the pneumatic capping turret equipped with the large capacity crown caps feeder
Capping the cans with aluminium caps on the rotary seamer

Once filled the cans are moved away from the filling star-wheel and transported by the bottle conveyor to the cans seamer.

During this journey a lid dispenser positions one lid on each can that passes underneath it.
Just before picking up the lid it is possible to add a fobbing device to eliminate any air inside the neck of the can (optional).

In the upper part of the lid distributor there is a revolving turret with 6 lid feeding cylinders. The cylinders can be removed and refilled as the lids are used up. The cylinders are filled up off-line ready to be installed rapidly at intervals. Each cylinder can hold up to 300 lids each, offering approximately one hour of total autonomy of production with all 6 full cylinders.

Extra kits of stainless steel cylinders are available as optional equipment to reduce stoppage time between refills.

When the can with the lid (now in a correct position), is under the cans seaming head, a pneumatic piston lifts the can up, while the two seaming rollers move in to seal the can end to the can body.

Now the can is ready for packing.

Bottle cappping unit (crown caps ):

Bottle cappping unit (ROPP caps ) – optional :

Cans seamer :

6th operation : Washing the full bottles/cans

The full bottles/cans are washed to remove residual foam from the outside of the bottles/cans.

7th operation : Unloading the full bottles or cans from the outfeed rotary table (may be replaced with an outfeed conveyor)

The cans and bottles are manually unloaded from the rotary output table.
The output rotary table may be optionally replaced with a conveyor that transportes the full bottles and cans to an other machine.

Control panel (touch display) :

Remote assistance via internet service

Interactive HMI interface on OMRON PLC for onsite production progress monitoring, production management & control and remote assistance.

The system allows our technician to be directly in contact with our customers in case of problems.
The bi-directional communication between the machine and remote system permit to see in real time if the operator is working in the correct way on the touch screen, and can be used to control the machine from our side for real time intervention (if necessary, for customer´s demand).

Optional equipment :

I. Tunnel pasteurizer (1500 bottles per hour)

We recommend you to order the filling line with a tunnel pasteurizer with main objective to pasteurize product inside cans or bottles to desired temperature, which should assure proper microbiological stability of the beverage produced(heat treatment process).

Description of the construction :

Construction of the machine is made completely from stainless steel AISI 304. This means that there are no parts from cast or iron or carbon steel. Result of this important fact is construction, which enables long life period of machine and corresponds to standards in food production industry. The machine is designed as monolith.

DIMENSIONS

Gross width: 2.200 mm
Length: 7.000 mm
Height: up to 2.300 mm
Treatment surface: 7 m2

** The photo is symbolic (an actual pasteurizer can be in different design)

The machine is placed on multiple (height adjustable) legs, enabling adequate distribution of load and overcoming potential differences in floor heights.

Important construction feature is also fully sanitary execution. Construction is completely welded. This means that practically all parts in contact with spraying water are waterproof (there is no point that would be only point welded). Also, from the outside surfaces majority of welds is continuously welded which provides lower possibility of impurities load.

Construction is designed (especially on inside but also on outside) in a way that where possible, all surfaces are inclined, so there is no possibility that water would be held and microorganisms would have chance to develop. This way we provide that the machine inside space stays longer intact and will be still without bad influence of smell, molds etc. On the outside, also roof of the pasteurizer is inclined, as well as top of the water tanks. This ensures that after external cleaning of machine all potential water residuals drip to the floor.

Next important construction feature is minimized water tanks below each zone enabling that minimum amount of water is at all times inside pasteurizer. Consequently, minimum amount of water goes to drain every time water inside pasteurizer needs to be replaced.

In concrete case single deck pasteurizer is foreseen for the project task. Construction of pasteurizer is designed on a way that multiple top and side manholes are available for easy approach to the inside for supervision and maintenance.

Top of the pasteurizer is covered with removable covers for inspection and maintenance reason.

** The photo is symbolic (an actual pasteurizer can be in different design)

Each pool has its own door for cleaning the tunnel and one central outlet for water. All pools are equipped with double mechanical filter sieves in order to prevent any dirt particles in the water to travel to the nozzles and to block them.

On the inlet and outlet of pasteurizer inspection doors made from stainless steel are installed.

Conveying system of the pasteurizer :

The tunnel pasteurizer is equipped with 1 independent main transporting belt. Width of transporting belt is approximaly 1180 mm.
Composing parts of pasteurizer are also in-feed and discharge conveyor (app. 1.500 mm from in-feed or discharge of pasteurizer), with electro motor drive together with frequency controller.

Main belt is running on supporting guides (wear stripes). Construction is indicated on below photo – parallel per module further different modules has displaced wear stripes (looking from the perspective of “neighbour” modules) in order to prevent cans or bottles from falling. With this it is assured that platform is adequate and that in every position, cans or bottles stand stable and there is no possibility of falling inside the pasteurizer.

Pumps and nozzle system :

The tunnel pasteurizer is equipped with suitable number of pools (10) and centrifugal pumps which transport water to nozzles. Pumps (parts in contact with water are from stainless steel) are protected from dry work with level probes in pools.

Main pumps are designed to assure flow of approx. 6,5 m3/h. Supporting pumps could have different flow depending from the purpose.

Spraying with process water inside pasteurizer is preformed trough register of nozzles which is placed on the top of the machine. Nozzles are producing fine fog of water that assures adequate transfer of heat energy. Nozzles are from plastic material.

Used type of nozzles is very simple to maintain due to easy system of fixing on the distribution pipes.
Nozzles are side (tangential) mounted on each spraying bar. This reduces possibility of blocking.

Standard distance from nozzle registers and main belt is 400 mm.

Instrumentation, controlling and automation :

Tunnel pasteurizer is equipped with multiple safety providing elements as well as quality and up-to-date software which enable simple control of all pasteurizer’s functions.

Offered machine has installed following measuring and regulating equipment:

Automatic water level correction (water tanks have installed level probes and in case of too low water level, water is being dosed automatically)
Automatic temperature regulation (system is equipped with regulating system at steam / hot water inlet which feeds pasteurizer with steam/hot water water accordingly to actual needs)
Automatic control of can over load on the main belt (inductive sensor installed on outside conveyors switches off the feeding conveyor in case of too big pressure)
Controlling and management of tunnel pasteurizer is executed through PLC computer and a touch panel. Electrical control cabinet is supplied in stainless steel execution and it is of IP 65 rate.

The control panel is installed on main electrical cabinet and is based on the Siemens industrial computing system.

The pasteurizer is equiped with our own developed software. Software is designed on a way that enables automatic control and overview of complete pasteurization process. Process parameters are visualized and displayed on user friendly interface. Software also logs and visualizes all process alarms.

Software is protected by password for various levels (administrator, operator, and maintenance).

Standard part of our software is also so called “boiling out” program, enabling periodical complete machine sanitation. This program enables thermal sterilization of complete system. Details about temperatures and durations are to be agreed with a customer.

During start up two recipes are foreseen to be commissioned. Any additional recipes are subject of additional cost.

Materials used, quality and standards the components :

Tunnel construction and construction pipes are made from AISI 304 material.
Pipeline seals are of EPDM material
Guides profile is polyethylene UHMWPE placed on stainless steel guides.
All gaskets (that are not defined differently) are EPDM material, on steam graphite.

Components used:

Pumps: LOWARA
Electro components: SCHNEIDER ELECTRICS
PLC computer: SIEMENS
Touch control panel: SIEMENS
Measuring and regulating equipment: E&H
Cable trays from stainless steel shape G and U, net without top cover
All stainless steel is purchased in Europe with certificates according to EN 10204

NOTE:
Adding any chemicals into the water of tunnel pasteurizer must comply with the resistance of these materials and has to be guaranteed from the local chemical distributor!

Dynamic active PU control

Dynamic PU (number of pasterization units) control enables that in no case product is over pasteurized. System’s platform is virtual deviation of pasteurizer to multiple rows which enables us to always monitor in which position are cans inside pasteurizer. In case of stoppage the system reacts on a way that main belt inside pasteurizer is stopped and cooling of cans in overheating and holding zones starts with intention to reduce product temperature below PU cut off point (for beer is calculated at 70ׄ°C). Our software is monitoring the duration of stoppage for the whole time and on a basis of wide range of heat transfer coefficients we know exactly how much time we need to cool in order to cool down product below PU cut off temperature and after stoppage is dismissed, we know exactly how much time we need to re-establish temperature regime that was in function before stoppage and to start of the main belt again.

Important matter is that dynamic active PU control does not end here. For every stoppage it is normal that product receives more PU than planned in balanced conditions. This means that for further process temperature SET points of next temperature zones are lowered in order to reach defined PU (inside agreed tolerances). This is happening also in case of multiple stoppages following one after another and in no case, product can exit over pasteurized (of course also under-pasteurization is not possible).

With technology of dynamic active PU control we can provide perfect pasteurization process with minimum impact to product organoleptic characteristics.

Standard process:
• Automatic control and regulation of PU is based on precise software which calculates (and monitors the exact position of cans inside the pasteurizer) current amount of received pasterization units.
• In case of stoppage on the line, pasteurizer starts cooling in required zones (overheating and holding zones) with goal of reducing product temperature below PU set point. This is obtained in order to prevent overdosing with PU’s.

• When stoppage on the line is dismissed, software again recalculates necessary temperature of spraying water in order to reach regime before stoppage occurred.

• Necessary temperature regime is projected on the basis of received samples, filled with an individual beverage product. In our laboratory pasteurizer all monitoring will be done prior to start of manufacturing of suitable system.

E&H registrator

E&H registrator RSG series RSH offers paperless recording, visualization and monitoring of all the crucial process values at the same time.

It is foreseen that module is mounted on the pasteurizer electro cabinet. All data that is recorded, is archived on SD card and can be used further on.

Ecograph offers a possibility of ethernet connection to local computer, enabling the transfer of recorded data for purposes of monitoring of the curtail parameters in real time.

Local computer and Ethernet connection are not in scope of supply and their ensure is a customer’s obligation.

Dosing of chemicals

In order to preserve the process water that is stored inside to tunnel for as long as possible and in the meantime reduce chance of cans corrosion, we offer an option of pre-installed system for dosing of chemicals – biocide & anticorrosive chemical solutions.

The dosing is of the two chemicals is done by two separate pumps, and is done directly in-line with support of a flow meter. The exact quantity of the chemicals dosed in to the water can be set on the pumps, while the dosing is then executed automatically. Along with the pumps a floating level switch is also suppled (if the chemicals level in the cannisters gets low, the machine signals an alarm).

System is foreseen for dosing biocide solution at 80 ppm and anticorrosive solution at 25 ppm . If different concentrations of chemicals are required, this should be agreed at the beginning of the project.

Note: if customer decides to install his own hardware for dosing of chemicals it is necessary to follow instructions of a producer regarding type of chemicals and their concentrations. In opposite case machine elements can be damaged.

UPS

UPS provides emergency power to a machine when the input power source or mains power fails or is disrupted. It ensures that CPU and HMI stay powered, so all crucial parameters are not lost. This is especially beneficial in case of pasteurizers with active PU control, where production can be restarted much more precisely with exact PU values.

Condensate removal armature

In scope of basic equipment, machine is supplied with manual shut-off valve, steam cleaning piece and pressure gauge on steam pipeline. As an optional upgrade we are offering you additional armature on condensate pipeline, which offers easy and simple connection in single point, while simultaneously offering practical maintenance. Condensate removal is foreseen by simple steam trap, active condensate pump (if required) is not included in scope of supply.

Scope of supply includes:

Ball float steam trap (1 pc)
Thermostatic steam trap (1 pc)
Non-return valve (2 pcs)
Manual ball valves (4 pcs)
Additional piping material

Steam pressure reduction equipment

If pressure of steam on site is higher than 3,0 barg, steam pressure reduction equipment is required. In scope of supply, we are offering you:
• Steam pressure reducing valve (1 pc)
• Safety valve (1 pc)
• Additional piping material.

II. Cans turners 180°

Equipment to turn the cans for 180°. Made of milled PE – intended to be installed on the conveyor.

III. Drying tunnel

Machine to dry bottle/can surfaces, before batch coding and packaging.

Turbines for the production of compressed/heated air at 45°/ 50°C
Two air dispensers in stainless steel A304 to dry the body of the bottles and cans adjustable in height, depth and inclination positioned in a transversal way
Double conveyor running at different speed for bottles rotation throughout drying process
Chassis in stainless steel A304 for engines containment
Safety guarding complying to CE rules
Electrical panel with control buttons
Switch for turbines switching on and off

IV. Carton sealing machine with the PVC tape

Semi-automatic manual adjustment carton box sealer according to the different carton box sizes that applies two “ U “ self adhesive tape stripes on the upper and lower boxes middle line.
Adjustment and utilization of SK1 are intuitive,simple and fast.
The machine is built in conformity with the CE safety laws actually in force.
2000 meters reel tape holder.
Flap compression rollers ( optional).
Adjustable bcarton boxes lateral guides.
Locked stop emergency button.
Average output: 700/900 carton boxes per hour.

Box dimensions to be used with the machine	minimal	maximal
length	150 mm	150 mm
width	140 mm	500 mm
height	110 mm	500 mm

V. Semi-automatic pallet wrapper

Semi-automatic stretch wrapper

Turntable diameter 1650 mm
Load 200 kg max
Pallet high sensor photocell
Mechanical brake
Pallet unloading ramp

VI. The CIP system

Semi-automatic CIP system with two tanks for chemicals

The CIP machine consists of:

1st Tank :
Stainless steel AISI 304 L, capacity 150 Lt, stainless steel coil for electric heating, stainless steel supporting feet for hot water + detergent.

2nd Tank :
Stainless steel AISI 304 L, capacity 150 Lt, stainless steel supporting feet for cold rinse water.

Set of manual butterfly valves – stainless steel, sanitary type.
Centrifugal pump for the cleaning, stainless steel, capacity

Stainless steel frame, with adjustable supporting feet, on which are assembled and connected the above-mentioned equipment.

Price list :

BASIC CONFIGURATION
DESCRIPTION	PRICE IN EURO

HYBRID EPV 6611 Automatic monoblock with the rinsing unit, filling unit, cans closing unit, including parts for one format of the cans + parts for one format bottle and crown caps Ø26mm	€ 137 950,-
Bottle capping unit now included in the monoblock with parts for one bottle format and Ø26mm crown cap	included
Dummy bottles/cups for the CIP process – for cleaning the bottle filling valves	€ 1 760,-
Dummy bottles/cups for the CIP process – for cleaning the can filling valves	€ 1 760,-
High temperature washing kit at 85 ⁰C – for CIP hot caustic solution for the internal cleaning	€ 3 400,-
Set of the replaceable parts for adaptation of the rinsing unit to use with the bottles – bottle grippers	€ 4 920,-
Changeover parts for filling valves to handle cans – filling valve adapters	€ 2 900,-
Set of the replaceable parts for adaptation of the rinsing unit to use with the bottles – infeed worm roller	€ 1 520,-
Set of the replaceable parts for adaptation of the filling unit to use with the bottles – filling valves	€ 5 200,-
Set of the replaceable parts for adaptation of the filling unit to use with the bottles – star wheel	€ 1 495,-
Filling pipe set for one format of the glass bottles	€ 390,-
2x can twisters for 500ml standard cans	€ 10 000,-

Price of the HYBRID EPV 6611 machine in the standard configuration without the labelling unit : (rinsing unit, filling unit, can capping unit, bottle capping unit + basic accessories)	€ 158 395,-

Linear self-adhesive labeller for wraparound label application on cans or bottles	€ 12 350,-
Alarm for end of label reel	€ 900,-
Traffic light signal for work in conjunction with alarm	€ 590,-
Inkjet date coder integrated into labeller	€ 4 100,-
Price of the HYBRID EPV 6611 machine in the standard configuration with the labelling unit : (rinsing unit, filling unit, can capping unit, bottle capping unit + labelling unit + basic accessories)	€ 176 335,-

Recommended equipment to expanding of the bottle filling line

Drying tunnel	€ 16 500,-
Blower for the drying the top of the cans and bottles	€ 1 700,-
Blower for the drying the bottom of the cans and bottles	€ 2 200,-
Rotation of the cans and bottles during drying phase using a dual chain at different speeds	€ 2 200,-

Carton sealing machine with the PVC tape	€ 4 550,-
2000 mm carton idle rollers infeed for carton packing	€ 1 950,-
Idle extendable rollers for finish packing accumulation from 1500mm to 4500mm	€ 1 320,-

Semi-automatic pallet wrapper	€ 6 500,-

The CIP system	€ 10 900,-

Conveyor system	€ 22 000,-
Drip trays	€ 995,-
Bi-directional can accumulation table 2000x1055mm (without automation) behind the tunnel pasteurising tunnel	€ 8 850,-
Automation of bidirectional table with control panel & sensors for automatic loading/unloading of the bottles and cans	€ 7 385,-

Total EXW price of the recommended configuration without the tunnel pasteurizer	€ 263 585,-

Tunnel pasteurizer 1500 bottles per hour	€ 145 000,-

Total EXW price of the recommended configuration with the tunnel pasteurizer	€ 408 585,-

OPTIONS FOR THE MAIN MONOBLOCK (RINSING UNIT, FILLING UNIT, CANS SEAMER)
DESCRIPTION	PRICE IN EURO

ROPP capping unit – one format 28×15 ROPP (instead the crown capping unit)	€ 3 400,-
Non-return valve for a beverage inlet line	€ 220,-
Spare seals for the six filling valves	€ 516,-
Fobbing device prior to lid application – hot water to be supplied by the client	€ 1 500,-
Spraying device after the cans/bottle capping operation to wash exterior surface of the cans/bottles free of excess foam	€ 1 350,-
Modem with the Ethernet connection for remote software assistance	€ 1 200,-
Set of parts to handle with additional cans format (different diameter)	€ 3 100,-
Six additional filling level pipes – required for each additional cans/bottles filling level	€ 390,-
Parts in contact with the product in stainless steel AISI 316 for handling with cider	€ 2 800,-
Automatic self levelling	€ 1 490,-
Replaceable parts for handling with different can lids: cans end magazine, distribution unit, cans seaming head	€ 7 000,-
Pneumatic stainless steel diaphragm pump with the input pipe connections	€ 5 500,-
Liquid nitrogen doser before can lid distribution (necessary for non-carbonated products filling)	€ 35 000,-
Closed circuit rinsing with buffer tank, filtration system & product relaunch pump (for rinsing with peracetic acid) entry level specifications for 20 liters tank	€ 950,-

OPTIONS FOR THE BOTTLE CAPPING UNIT
DESCRIPTION	PRICE IN EURO

Parts to handle with additional format diameter bottles	€ 990,-
Caps level monitoring device in the caps feeding bowl	€ 850,-
Device to detect the presence of the cap on the bottle at the exit of the machine	€ 1 135,-
Injection of CO² into the neck of the bottle before the capping with a crown	€ 2 235,-
Parts to handle withcrown corks of 29mm diameter	€ 2 740,-

OPTIONS FOR THE TUNNEL PASTEURIZER
DESCRIPTION	PRICE IN EURO

Dynamic PU control	€ 11000,-
E&H registrator	€ 2760,-
UPS	€ 1200,-
Dosing of chemicals	€ 7475,-
Condensate removal armature	€ 3105,-
Steam pressure reduction	€ 4552,-
Remote maintenance	€ 1400,-

Optional services :

I. Installation work on the place …. € 7200 / 7 + 2 days

The price is valid for all countries of the European Union. The price includes seven days work (+ two days travelling) of two specialists on the place – assembling and start up of the equipment.

The price does not include : transports costs and accomodation of the workers. Will becalculated individualy.

II. Installation work ensured by customer (with our remote assistance) …. € 850 / day

Do you want to save your money ? Are you technically skilled and not afraid of challenges? Do your country’s hygienic restrictive regulations not allow a visit of a specialized technician from a foreign country? Don’t be afraid to use the remote assistance service.

How is the installation of the filling line by our customer, using our remote assistance?

1.) The customer positiones all the machines and connects them to power guided by our checklist.

2.) Once photos were sent of the completion of the preliminary phase we proceeds with the start up and commissioning.

3.) First we connects the PLC of the machine via internet to our service console in our factory — this allows our service manager to view and control your PLC on a remote screen, as if he was in front of the machine in person.

4.) We then organise a Microsoft Teams conference call, with one your worker holding the camera, and the others working around the our technician´s instructions.

5.) After only 3-5 days setting up and configuring, first full glass bottles or cans will leave your filling line.

Video :

General sales conditions :

This document is subject to final confirmation after receipt of samples of the bottles, labels, caps, capsules and information on all raw materials to be processed. Following conditions are applicable unless otherwise stated in the above document.

1. General Principles
These terms and conditions of sale shall be applied unless otherwise specified in an agreement written by the seller and the customer (herein referred as the “Buyer”). When a Buyer sends an order, it implies full acceptance of these Conditions of Sale and supersedes any previous offers, correspondence and quotations between the Parties.

2. Sales Contract
The Seller shall be bound to abide solely by the terms specifically set forth in the present document. The Parties are bound to respect the terms of the Conditions of Sale only after the Seller has accepted the Buyer’s order in writing, in the form of a confirmation of receipt of the order.

3. Prices
Prices are “EX-WORKS”, VAT is not included. The quoted prices do not include shipping, insurance or packing. These items will be calculated separately.
Prices are established on the basis of economic and financial conditions as of the date of the quotation.
Prices are quoted for Products only and do not include technical data, or patent or proprietary rights.

4. Delivery
4.1. Delivery terms shall be calculated as of the date of the confirmation of the receipt of the order.
Delivery time is subject to receipt of the payment to deposit account, samples necessary for the construction of the equipment and technical details. In any event, if the order is suspended, after that date, for any of the following reasons such as non-payment of invoices, lack of approval of drawings, non receipt of samples or prototypes, transfer of export or import licenses, credit facilities, etc., the delivery date shall be considered as of the date said conditions are fulfilled.
4.2. The delivery date indicated by the Seller shall be considered an estimate. Unless specifically agreed otherwise by the Seller and Buyer, missing the delivery date shall not be cause for cancellation of the order or entitle the Buyer to any indemnification.

5. Force Majeure
Any conditions of force Majeure shall be cause for the Seller to suspend its commitments until said conditions shall cease to exist. The following conditions shall be considered force Majeure to the terms and conditions of sale: any unforeseeable circumstance the effects of which could not be reasonably prevented by the Seller and which are of such nature as to prevent the Seller from fulfilling its obligations.
The following conditions constitute force Majeure : fire, flood, interruption or delay in transportation, shortcomings on the part of a supplier or subcontractor, strikes of any kind, machine breakdowns, epidemy, goverment restrictions etc.

6. Insurance and Transportation
The goods shall be shipped at the buyer’s risk. The buyer shall be responsible for inspecting the goods upon arrival and, if necessary, advise the shipper of any damages. Upon receipt of specific instructions from the Buyer, shipments may be insured by the Seller who will then bill the buyer for the insurance costs.

7. Installation & Setting up
In case that assembly and start-up operations are requested, the Seller will guarantee the execution of the plant assembling and start-up in the lowest possible time, at prices indicated in the standard tariff unless otherwise specified in the present document. Seller´s technicians will start assembling work after a communication with the Buyer who confirms that the machines arrived on site in good condition, that the eventual preparing operations have been carried out and that all rooms and relative utilities in place have been finished in accordation with the Seller´s requirements (building works, piping and electric nets). It is understood that at technician/s arrival the necessary manual labour, all lifting and movement means will be at disposal as well as the necessary work-shop equipment and needed tools.
The Buyer will prepare and ensure :
• the area provided for the installation and the appropriate access routes free from stored materials or equipment;
• the necessary mains supply requirements such as water, steam, inert gas, product, electrical connections, compressed air, etc. available at the specified predetermined user points.
• the necessary handling equipment (forklifts, cranes, etc.) to discharge, to allow site positioning and handling of equipment and materials on site and the necessary personnel dedicated to such tasks.
• placing the products and all required raw materials on site in sufficient quantity for conducting the necessary equipment tests.
If the installation is not carried out or will be prolonged, due to delays whether attributable to the Buyer, then the Seller will charge the Buyer the costs related to technicians’ time at an hourly rate prescribed in our intervention tariff, and also the cost of expenses incurred for travel, food and lodging.
Furthermore, the Buyer’s staff, appointed to control and maintain the equipment, must co-operate with the Seller’s technicians for the assembling operations and to receive training.
Installation, start up and commissioning of the equipment are at the expense of the Buyer who will be charged the cost of technical assistance provided at our standard rates and terms and conditions (details provided on request and may vary depending on the country of destination).
During the commissioning of the system, the technical personnel of the Seller will carry out various routine tests on the equipment which may cause a certain amount of product loss. The Seller will not be held responsible for such losses and will not be liable for any claim of compensation.

8. Conditions for Acceptance on the part of the Buyer
8.1. Product features shall be those published in the most recent edition of the manufacturer’s specifications, unless other features are specifically agreed upon between the Seller and the Buyer.
8.2. The output capacity of the Products described in the present document result from an average calculation carried out with similar product characteristics or as a result of a theoretical calculation, unless otherwise specified. The Seller will advise the Buyer about the real effective capacity after having trialled the Product with the sample Products supplied by the Buyer. In the case that product samples are not supplied by the Buyer, the Seller shall not be responsible for properties different from the values stated in the offer.
8.3. The Seller’s goods are subject to tests and inspections in the factory where they are manufactured. The Buyer is entitled to request that the goods be inspected in his presence. If the Buyer cannot attend said inspections after having been given the agreed, advance notice of the date by the Seller, the Seller may send the
Buyer the inspection report that the Buyer will accept without discussion.
8.4. In order to be accepted to the provisions of this paragraph, all claims regarding the goods supplies shall be prepared according to the instructions provided by the Seller and contained in the documents sent with the goods.
8.5. No goods may be returned without prior authorisation from the Seller.
8.6. When a return of goods is accepted by the Seller, the Seller shall have the option to repair or replace the item(s) or to issue a credit note for the items acknowledged to be defective. In any event, the Buyer shall not be authorised to consider the return of goods, to suspend any payments due to the Seller, nor to cancel all or any part of any still pending order.

9. Payment Terms
Payments to the Seller covering price of the goods and related services supplied shall be effected according to the conditions set forth on the present quotation or order confirmation and the invoice. In the event the purchaser does not pay an invoice or part of it, the Seller shall be entitled, without prejudice to its other rights, to suspend all deliveries, irrespectively of the terms of the order(s) until full payment is received.

10. Title
Notwithstanding the effected delivery to the purchaser, the goods shall remain the property of the Seller until full payment is received. In the event that the purchaser does not effect payment by the established date, the Seller may repossess back already the delivered goods. In any event, as specifically stipulated, the purchaser shall be responsible for all damages and losses that may occur after delivery.

11. Warranty
The Seller engages to try solving all eventual defects coming from designing, production and assembling defects, guaranteeing the regular running of the supplied equipment for a period of 12 months from the date of shipment, if not agreed different time.
The warranty does not include normal wear and tear , and break downs due to an incorrect or improper use, to lack of diligent maintenance and to the non observance of technical descriptions as well as instructions indicated on the hand books which will be supplied to the Buyer. Warranty is limited to mechanical parts which are not subject to wear and does not include electric and electronic components, as per international guarantee regulations. Defective parts under guarantee must be returned to the Seller for examination and assessment of the defect, for the Buyer´s costs.
Replacement of damaged parts will occur after the manufacturer’s examination and confirmation of the damage of the returned defective component.
Replacing the components with non original parts by the Buyer or his customer shall invalidate the warranty unless such replacement has been specifically permitted by the Seller in writing. Spare parts supplied under guarantee are delivered free of charge EX-WORKS. All expenses for shipment of such parts from EX-WORKS to destination, including our technician’s travel, food and lodge are at customer charge. The Seller’s own technician labour for installation of spare parts under guarantee is free of charge. Any intervention carried out on the Seller’s equipment by the Buyer or by third party technical personnel are only for customer’s charge and responsibility. Modifications or interventions on the equipment may invalidate the guarantee terms unless explicitly authorised by the Seller.

12. Transfers
By virtue of this document, any transfer by the purchaser of any contract without prior makes agreement from the Seller shall render the contract null and void and shall relieve the Seller of any future obligations.

13. Court of Jurisdiction and Applicable Laws
In the event of judicial proceedings, the rights, obligations and claims of both parties will be decided by a court in a European country and city chosen by the Seller, irrespectively of the agreed upon terms of sale and payment, as well as warranty problems or in the event of multiple defendants.
The agreement and any difference or dispute arising out of it or related to it shall be governed, construed and interpreted in accordance with the Laws of Czech Republic. If any dispute, difference in opinions or question shall arise between the Parties under or in connection with the Contract, including any dispute on the validity of the Contract, such dispute, difference or question shall be finally settled by arbitration under the Rules of Arbitration of the Ministry of commerce of Czech Republic as in force and effect at the date hereof by one or more arbitrators appointed in accordance with the said Rules. The language to be used in the arbitrate proceedings shall be English. The seat of arbitration shall be Opava, Czech Republic. The decision of the arbitrators shall be final and conclusive and shall be binding on the Parties.

14. Compliance with Safety Regulations
The Equipment is built according to the European CE regulations. It is the duty of the Purchaser to inspect all Products and to provide proper safety devices to safeguard the operators from harm and to ensure compliance with all Safety Regulations. By accepting the “Order Confirmation”, the Purchaser acknowledges and agrees that the goods may not include or require the necessary safety equipment to permit safe operation or comply with Local, State, Federal, Industry and/or other applicable Safety Standards or requirements which may be different from the CE regulations. Before placing the equipment in operation the Buyer agrees to utilise such safety equipment and will give operators such instructions and/or warnings as necessary to permit safe operation and to comply with Local, State, Federal, Industry and/or other applicable Safety Standards or requirements. Purchaser further agrees to indemnify and hold Seller and their officers, employees harmless from any and all liability which may be imposed upon Seller and any and all costs, including attorney fees, incurred as a result of any claim made against Seller for injury arised out with the Products, that was caused or contributed to by purchaser’s or user’s failure to provide safety equipment and/or instructions and/or warnings necessary to operate this Products safely.

15. Instruction manuals:
The instruction manuals, assembly manuals, operation manusls, maintenance manuals are supplied exclusively in English language.

BCFL-MB1500TP : Automatic counter pressure filling line for 1500 bottles or cans per hour with a tunnel pasteurizer