Description
Semi-professional plate filter for the filtering of wine, beer, fruit juices, etc. With powerful stainless steel centrifugal pressure pump, mobile frame in stainless steel, filter holders in moplen and the necessary connection parts (for 19 mm PVC hoses). The pump can also be used separately for siphoning.. Available with 10, 20 or 30 pcs of stainless steel plates (frames) for filtration cartons 200×200 mm.
This filtration system involves the use of filter layers “cartons” which are interposed between the plates with frames made of stainless steel. New and very favourably priced handy table top model of the beverage filter with handle and drip tray. Pump without bypass, can also be used separately. Suitable for filtering food liquids such as wine, beer, juice, etc. Not suitable for double filtration. With standard NBR seal for liquids up to 60°C.
Hose connections: DN 20 mm; pump power 0.5 hp, 230 volt/50 Hz, 2850 rpm.
Delivered without filter cartons and hoses!
The filtering machines produced in three variants have the following characteristics:
1. Mobile plate filter 200×200/10 with 10 pcs of stainless steel plates – maximal flow rate 300 L/hr (wine) / 200 L/hr (beer)
Filtration surface : 0.40 m²
Dimensions : 460x670xh850 mm / 36kg
2. Mobile plate filter 200×200/20 with 20 pcs of stainless steel plates – maximal flow rate 600 L/hr (wine) / 400 L/hr (beer)
Filtration surface : 0.80 m²
Dimensions : 460x670xh850 mm / 38kg
3. Mobile plate filter 200×200/30 with 30 pcs of stainless steel plates – maximal flow rate 900 L/hr (wine) / 600 L/hr (beer)
Filtration surface : 1.20 m²
Dimensions : 460x670xh850 mm / 41kg
Stainless steel frames
Stainless steel frames are a professional solution for the beverage filtration – easy cleaning and long lifetime.
Properties of all types :
- AISI 304 stainless steel filter frame
- Input/output hose fittings DN20
Standard accessories :
- Electric pump
Optional accessories :
PVC beverage hose 20mm … € 6 / meter
Spare part : set of rubber seals … € 15 / set
Spare part : input terminate plate – noryl 200 x 200 mm … € 19 / pc
Spare part : middle plate – noryl 200 x 200 mm … € 19 / pc
Spare part : output terminate plate – noryl 200 x 200 mm … € 19 / pc
Why choose a plate filter for the beverage filtration ?
Beverage filtration through a plate filter is the cheapest and easiest way to get rid of most live yeast in beer or cider. It is used in microbreweries of a small and medium size, for which the cost of the equipment is a primary decision parameter.
These filters are made from stainless steel therefore resist to extent aggressive substances. They consist of two end steel plates ,one of which is slidable on guide pins , controlled by the pressure screw or hydraulic element. Among them there are stainless steel frames with filter cellulose pads (cartons) of the choosed porousity and number of the plates according to the required purity and overall flow capacity of the filtered liquid.
During passage of beverage through the filtration plates the impurities contained in the beverage are captured. The flow rate gradually decreases, depending on the saturation of the filter plates by the impurities (yeasts).
Plate filter is mobile on castors and it is equipped with a control pressure gauges, air-outlet valve and flow taps made of stainless steel. The filter allows continuous filtering and dual filtering with different purity grade using two types of cartons in one pass through the filter body . It is a convenient way especially in terms of lower workload of beverage and easier to easy work.
Advantages of a plate filter:
- Low cost of purchasing
- Easy to use
- Using both primary and secondary filtration – choice of filter elements
Disadvantages of a plate filter:
- Higher cost of consumables in comparation with the kieselguhr filters – the filter cartons are intended only for several use
- It is necessary to disassembly entire filter after its every use, to remove the filter plates and also to do the full cleaning and sanitizing of the filter
Reviews
There are no reviews yet.