Description
Pre-filtration candle element 30/3″ with porosity 0.5 µm (the pre-microfiltration element for a final beverage product). Consumable filtration material for mechanic candle filters.
Eaton BECO PROTECT FS Depth Filter Cartridge, FS005, 0.5 µm, 30″, Code 7, Silicone O-rings
- Product name : Eaton BECO PROTECT FS Depth Filter Cartridge
- Product code :FS0573S
- Recommended use : Pre-fitration of a drink to reduce quantity of bacteria in the drink
- Producer : Eaton, USA
- Compliance with standards : EC 1935/2004, EC 10/2011, FDA 21CFR
- Certifications : ISO 9001, Kosher
BECO PROTECT FS FineStream depth filter cartridges are innovative depth filter cartridges with a special design that increases the filter area.
The variable flow of the BECO PROTECT FS depth filter cartridge is also special. This can be adjusted to flow from outside to inside or, if the inlet and outlet ends on the housing are reversed, from inside to outside. The filtering effect remains the same.
The BECO PROTECT FS depth filter cartridge is used in the beverage industry.
Outstanding protection for subsequent membrane filtration thanks to the fine, newly developed filter material (0.2 µm) and thus an increased membrane filter cartridge service life.
Features:
- Element size : 30/3″
-
Diameter : 2.75″
- Pore size 0.5 µm
- Weight : 2.75 kg
- High retention for a reliable separation effect, ß ratio ≥ 5000 or ≥ 99.98% efficiency for defined particles
- The larger filter area gives a greater filter performance
- Long filter service life
- High chemical resistance through use of 100% polypropylene
- High dirt holding capacity through graded filter configuration
- Minimum product loss with flow from inside to outside
- Back-washable up to 29 psig (200 kPa, 2 bar) at 176 °F (80 °C)
Product specifications :
Differential pressure in flow direction – max | 4.8 bar at 25 °C / 2.0 bar at 80 °C |
Cage material | Polypropylene |
Adaptor | SOE 226 O-rings double bayonet adapter with spear |
Steam cycles | >100 at 110°C in 30 minutes |
Filter material type | Polypropylene |
Adapter code | 7 |
Adapter material | Polypropylene |
End cap material | Polypropylene |
Design | Special pleated |
Gasket / O-ring material | Silicone |
Cartridge length | 30″ |
Retention efficiency | 99.98% |
Retention rating | 0.5 µm |
Operating temperature – max | 80 °C |
Backwashability | Up to 2.0 bar (29 psid) at 80 °C (176°F) |
Inner core material | Polypropylene |
Chemical resistance | pH 1-14 |
Reviews
There are no reviews yet.