Description
Lasselsberger F15 kieselguhr (filtration diatomaceous earth) is a filtration material intended for fine filtration of beverages or liquids with a high turbidity like wine, syrup, beer, cider, and other low viscosity liquids. Recommended for the pre-final or the final filtration – the penultimate or last stage of the liquid filtration process.
Suitable for dosing, which ensures high clarity of the filtered liquid when used correctly. Filtration speed 50-80 l/m2/hour.
Czech Product
Technical parameters :
Filtration Velocity | 50 – 80 l/min.m² |
Permeability | 0,065 – 0,100 Darcy |
Bulk Density | max. 250 kg/m³ |
Wet Density | max. 500 kg/m³ |
Water Leach pH | 7 – 9 |
Technological Humidity | max. 1 % |
Smell | – |
Taste | – |
Colour | beige |
Residue on sieve :
0.250 mm | max. 0.00 % |
0.045 mm | max. 3.00 % |
Chemical Analysis :
SiO2 | min. 78 % |
Al2O3 | max. 13 % |
Fe2O3 | max. 1,5 % |
LOI | max. 0,5 % |
Heavy Metals Content :
Compedium of food additive specifications Volume 1 (Rome)
As | < 10,0 mg/kg |
Pb | < 10,0 mg/kg |
Others Heavy Metals | < 50,0 mg/kg |
Extraction (MEBAK 1.1.2.6.1) :
Al | max. 280 mg/kg |
Ca | max. 180 mg/kg |
Fe | max. 80 mg/kg |
The specific advantages of Lasselsberger kieselguhr:
– Optimum dirt holding capacity
– Reliable filtration through rapid formation of an adherent filter cake
– Very economic due to the optimum ratio of flow rate and clarification sharpness
– Maximum purity, safe to use in accordance with German and EU regulations and US-FDA (Food and Drug Administration) requirements concerning the production of beverages
Application
Lasselsberger F15 kieselguhr is recommended for the pre-final or the final filtration in the following filter devices:
- Plate filters with washable support plates
- Kieselguhr filters (the candle filters) with horizontal or vertical screen elements
- Cartridge filters with vertical filter cartridges
- Rotary vacuum filters for separating larger solid quantities, according to the machine manufacturer’s specifications
- Filter presses for sludge separation: Lasselsberger diatomaceous earth is mixed into the liquid sludge as a drainage aid or added as a pre-coat for improving filtrate clarification
Product Characteristics
Diatomaceous earth is produced from the silicaceous deposits of microscopic diatoms. The powdery Lasselsberger diatomaceous earth is produced by mixing specially selected particle sizes. It is largely free from non-filtering components such as fine dust and silica sand.
Safety
When used and handled correctly, there are no known unfavorable effects associated with Lasselsberger diatomaceous earth. Inhalation of dust is harmful. If dust forms, use an extractor or wear a breathing mask.
Further safety information can be found in the relevant Material Safety Data Sheet, which will be delivered on demand.
Storage
As an active adsorbent, Lasselsberger diatomaceous earth may take up moisture and odors.
It must therefore be stored in undamaged packaging in a dry, well ventilated place without off-smell.
Packing for transport
- 1 pack : 25 kg / Paper bag with dimensions 80 x 40 x 12 cm
- 1 pallet : 675 kg / EUR-pallet 80 x 120 x 170 cm (45 x 15kg bag)
Reviews
There are no reviews yet.