Description
Stainless steel panel with 1-way gas line manifold (pressure manifold) equipped with an Italian pressure regulator with a range of 0-8 bar and a pressure gauge of 0-10 bar. Quick Couplers for 8.0mm hoses (5/16″).
Basic technical specifications :
- 1x gas inlet : Quick Hose Coupler for 8.0mm hose (5/16″)
- 1x gas outlet : Quick Hose Coupler for 8.0mm hose (5/16″)
- Gas pressure regulator – Maximum permitted gas pressure : 8.0 bar
- Manometer 0-10 bar
- Stainless steel panel with 6.5mm holes for easy wall mounting.
- Gas inlet and gas outlet are fitted with 8mm quick hose couplings.
- The pressure regulator is equipped with a safety lock (by pressing the blue control you lock the regulator and the pressure cannot be accidentally adjusted until you unlock the control by pulling it out again).
Example of use:
You need to have a different pressure in each of the two barrels (e.g. 2bar and 1bar). Connect a “Y” or “T” quick hose coupler to the hose from the pressure reducing valve, thereby splitting the output.
Connect one output where a higher pressure is required in the barrel (in our case 2bar) directly and set this value on the pressure reducing valve.
connect the second output where you require a lower pressure (1bar) to the regulator and the regulator to the second barrel. Then set the required lower pressure on the panel (in our case 1bar).
