Name: BLA-MB1500 : Automatic bottle labelling unit (1500 bottles per hour)
SKU: BLA-MB1500
Price: 9880 EUR
Availability: InStock

Description

Automatic bottle labelling machine for applying self-sdhesive labels – Model BLA-MB1500. Automatic linear labelling machine equipped to apply one self adhesive label on glass bottles. For bottles with maximal diameter 300mm. Capacity maximally 1500 bottles per hour.

Production Speed: 1.500 BPH maximum

Label minimum length: 10 mm
Label maximum length: 130 mm
Label minimum height: 10 mm
Label maximum height: 80/120/160/240 mm
Container minimum diameter: 40 mm
Container maximum diameter: 130 mm
Container minimum height: 150 mm
Container maximum height: 370 mm

MACHINE STANDARD FEATURES

Base Frame and General Structure

– The support frame is made of welded strong iron steel profiles and is equipped with height adjustable feet.
– The top surface is a carbon steel plate, covered with Aisi 304 stainless steel metal sheet.
– Inspection is possible through side doors and frame side skirting clad with Aisi 304 stainless steel plate.
– Standard machine colour: RAL 7038.
– Machine prearranged to install a second labelling station in the future.

Safety guards

– Safety guards are present along the whole base frame perimeter.
– Guards are made in Aisi 304 stainless steel with transparent material windows. Openable doors are fitted with interlock type micro-switches.

Machine drive

– Main gear box is of crown-screw worm type and oil bath lubricated.
– Feed screw transmission systems are complete with safety electro-mechanical clutch devices to stop the machine in case of container jamming.

Infeed and discharge conveyors

– Conveyor channel complete made in AISI304 stainless steel, with wear-proof plastic rollers and sliding profiles.
– Tabletop type conveyor belt, Aisi 304 stainless steel (or Delrin) made.
– Bottles are guided by a conveyor made of stainless steel and plastic contact profiles side guard-rails, adjustable in width.
– Infeed device intended to space out the bottles by pneumatic lever.
– Infeed device intended to center the bottles before the labelling machine with micrometric adjustment in width by handwheel.
– Device to stabilize the bottles during the labelling and wiping with micrometric adjustment in height by handwheel with synchronized speed of the one of the conveyors.
– The input gate lock device can be manually or automatically operated.

Self adhesive labelling station

Machine equipped with one (1) self adhesive labelling station installed on vertical slides easy adjustable composed of:
– Stepping motor;
– Drive and control micro processor pre disposed to operate the printing unit (optional);
– Dragging rubber roll with contrast roll mounted on springs;
– Labelling tongue for labels of 80/120/160/240 mm height (to confirm);
– Supporting reel plate Ø 320mm equipped with un winding shaft;
– Motorized abeler paper re winder;
– Containers detection photocell;
– Label detection photocell;
– Drive buttons included in the group;
– Box containing drive and electrical parts in stainless steel, with open able access panel complete of lock general switch;
– Manual adjustable stainless steel support, complete of digital indicator for an easy adjustment;

Wiping system

– Labels wiping by sponge rollers.
Machine control system

– The machine is delivered with complete electric and pneumatic plants, ready to be connected to the main factory plants.
– Pneumatic plant is complete with pressure regulation unit, air filter and air lubricator.
– Main electrical panel, waterproof type, is integrated in the machine structure.
– All machine controls and status/signal lights are centralized on a single operator panel, complete with removable push-button station (emergency stop + pulse motion buttons).
– Machine infeed automatic closure in case of containers build-back at discharge side.
– All electric and pneumatic power and control circuits are built in accordance with the latest applicable international standards.
Anticorrosion treatment
– Large use of materials not subject to corrosion as stainless steel, not-ferrous alloys and plastic materials.
– Meltings and carbon steel parts undergo an anticorrosion treatment by multicoating epoxy painting.

Something more

– Maintenance and lubrication easy and short time requiring due to the high quality of components and materials used;
– The machine has been designed in order to have maximum accessibility for cleaning and debris removal purposes;
– Colour or customized coded change over parts and accessories.