NIG-PNOT-2600 PN OnTouch Nitrogen Generator 2650 liters of 99.5% N2 / hour

The NIG-PNOT-2600 is a powerful PSA (Pressure Swing Absorption) nitrogen generator with the production capacity 2650 liters of the nitrogen gas per hour (with 99.5% purity). Nitrogen is generated through pressure swing process thus providing purity levels to up to 99.999%. Max. pressure: 13 bar. The 150 liters pressure product tank and Touch Control Panel (for the remote control and monitoring) are included in the set. An air compressor is not part of the nitrogen generator. Recomended solution for most of small breweries – the nitrogen is useful as an inert push gas (for transport of product between pressure vessels or into the dispensing equipment in the pub) instead of expensive CO2.   Made in Germany.

Benefits of the OnTouch Nitrogen Generator

• Controls the automatic mode
• Alarm notification via email (Optional BUS- compatibility)
• Multiple languages available
• Web-enabled interface for remote maintenance
• Standard Monitoring from Purity and outlet pressure
• Archived all operating data in a long-term storage (export option)
• Manages different access rights
• Accumulated consumption values and operating times
• Possibility of additional monitoring functions
• Expandable with additional sensors
• Startup

About the PSA technology – Pressure Swing Adsorption

PSA-nitrogen purity levels to up to 99.9999% – to 10.000 Nm³/h

Nitrogen is generated through pressure swing process thus providing purity levels to up to 99.999%.
Nitrogen adsorption is based on two vessels filled with CMS active carbon, which are alternately fed with compressed separating the nitrogen and the oxygen.
The nitrogen is collected in a system vessel, the oxygen is released into the atmosphere.
All details which the customer wishes to measure, such as compressed air temperature, compressed air pressure, purity and pressure of the generated nitrogen, are monitored and protocoled continuously

Technical specification

Performance at 7 bar inlet pressure, 25 °C pressure air and ambient temperature
The maximum operating pressure is 10 bar

Purity …. 99,50 %
Capacity …. 2,6 Nm³/h
Compressed Air …. 7,5 Nm³/h

Benefits of the PN OnTouch Nitrogen Generator

The Active Carbon

• High-quality activated carbon
• Works at 5 bar inlet pressure
• Low air factor / high efficiency

The Valve technology

• Compact and low-maintenance valve block
• Easy accessibility
• Redundant control valve
• Operational status indicators
• Slowly opening and closing pneumatic valves

The Touch Control Panel

• Controls the automatic mode
• Alarm notification via email (Optional BUS- compatibility)
• Multiple languages available
• Web-enabled interface for remote maintenance
• Standard Monitoring from Purity and outlet pressure
• Archived all operating data in a long-term storage (export option)
• Manages different access rights
• Accumulated consumption values and operating times
• Possibility of additional monitoring functions
• Expandable with additional sensors
• Startup

Filtration

OnTouch nitrogen generators are supplied with 3 filters :

• pre filter
• active carbon filter
• fine filter

The effectiveness

• Purity up to 99,9999% with our NKat-System
• with an air factor of 2.9

Opportunities

• Special design in Stainless Steel, ATEX, Redundant
• 24/7 accessibility
• 60% Cost savings
• Life up to 25 years

Recomended accessories :

CAS-9600 Compressed Air Station 9,6 m3/hour with filtration & dryer

Compressed Air Station SCROLL line industry with galvanized compressed air vessel, filtration and integrated air dryer. Oilfree air compressor with production capacity 9,6 m3 of 8 bar compressed air per hour. Motor power 1,5 kW, 90-liter compressed air vessel. Made in Germany.

Compressed Air Specification:
Max. pressure: 13 bar
Temperature range: 2 – 50°C
Air quality: according to ISO 8573.1
class 1 mud and oil
class 4 water
free of all contaminations (free of ozone)

Ambient Conditions:
Temperature range: 2 – 50 °C
Humidity: 10 – 80%

Terms of conditions and delivery

Warranty 12 months for the generator if maintenance intervals are correctly observed
Placement to be performed by purchaser – by instalation manual
Installation to be performed by purchaser – by instalation manual
Start up to be performed by purchaser / optional producer -> exclusive (surcharge)
Delivery EXW Herrsching IncoTerm
Shipping cost.. not included in price  -> will be calculated individually
Packaging packed for a safe transport -> exclusive (surcharge)
Date of pick approx. 4-6 weeks after our bank has officially confirmed full receipt of payment
Payment 100% prepayment
Documentation included
Offer validity 10 weeks after issue date of quotation

Service cost rates

Following cost rates are valid for labour-, travel and waiting time hours, as far as the latter are under client’s responsibility.
They are valid for service performance realised at our premises, but also for working performed on client’s operation site. Principal installation performance is to be carried out on the basis of producer conditions for domestic installation. In this regard the terms for warranty and liability are particularly important.

As from 01.01.2011 the following rates are applicable:

Start-up Engineer/Installation-Engineer (also assignment of technical manager) … EUR 1.500 / day
Installation-technician/Commissioning delegate (also factory technician/supervisor) … EUR 1.300,00 / day
Supervisor/technician gas supply equipment … EUR 1000 / day

All rates listed above do not include VAT.
Surcharges for extra work, night shift premium, Sunday premium, travel expenses, Visa, and work on public holidays are to be agreed separately.
The daily allowance is calculated for 10 working hours – Europe. Travel costs, hotel accommodation and flight travel costs will be charged separately.

Spare parts and Service

Spare parts are available from us for up to 25 years.
Service is performed worldwide by German producer, as we are cooperating with agencies in many countries of the Globe.