FZA-CSC844 : Cooling/heating spiral 840mm | TriClamp TC 4″ 119mm | AISI 304

The stainless steel cooling spiral with length of 840mm and TriClamp 4″ 119mm connection lid is designed for cooling the fermentation vessel, by immersion directly in the fermenting beer or cider it effectively maintains ideal temperatures for fermentation.

The cooling spiral can also be used for the rapid cooling technique, which improves the clarity and taste characteristics of the beer by cooling the beer to a low temperature and allowing residual yeast and other particles to settle at the bottom of the fermentation vessel.

The cooling loop is made of high quality stainless steel and is easy to clean. The length and width are optimal for cooling up to 143 liters of beer.

This cooling spiral can also be used for the rapid beer cooling method, which improves the clarity and flavor of beer by cooling the beer to a low temperature and allowing residual yeast and other particles to settle to the bottom of the fermentation vessel.

Technical specifications :

• Spiral cooler made of stainless steel with a length of 840mm
• TriClamp 4″ (DN100) lid with disc diameter of 119mm (without the clamp)
• 2x outlet for cooling medium
• 2x BallLock outlets (1x beverage, 1x gas)
• Connector TriClamp 50.5mm (e.g. for connecting a the HopBong, safety valve, etc.)
• Stainless steel float and mesh filter for suction of pure beer above sediment
• This spiral can be used on all fermentation vessels with the TriClamp 4″ connection DN100 with disc diameter of 119mm (Kegmenter, Conicus Pro, BrewBuilt, Ss Brewtech, Brewtools, Brew Monk, etc.)