BCB-M600 : Manual bottle sterilizing and blowing machine with recycling pump

Manual sterilizing and blowing machine for glass bottles

The bottle sterilizing machine allows to rinse glass bottles and jars from inside with an alcohol based sterilizing solution and then dry the bottles with sterile pressure air. Two positions for bottles to be sterilized + two positions for bottles to be blowed.

Can be used with bottles of various shapes – range of volumes from 0.2 litres up to 2 litres.

• Maximal bottle diameter: 120 mm.
• Minimal bottle diameter: 30 mm.
• Maximal bottle height: 400 mm.
• Minimal bottle height: 180 mm.

Main properties :

• • Productivity … depending on the operator experiences : 200 up to 600 bottles/hour.
  • Sterilizing solution consumption … 0 liters/bottle – the sterilizing solution is recycled using the pump.
  • Stainless steel centrifugal pump for recycling of sanitizing solution.
  • Dimensions: width 51 cm, length 47 cm, height 65 cm, weight 25 kg.
  • Made to EC standards.

Can this machine also be used for used bottles? No, the BCB-M600 machine is not intended for washing used bottles – for this purpose we recommend purchasing a special washing machine for used dirty bottles.

What is the rinsing time of the bottles? Since the bottles are clean, then 3-6 seconds are usually enough to sterilize the bottle.

How many bottles are sterilized at one time? The BCB-M600 has 4 nozzles: The user rinses 2 bottles at two primary nozzles, then he can let them dry the bottles inside with the secondary two nozzles with pressurized sterile air.

What sterilization solutions can be used? A mild concentrated sterilizing solution, such as a 0.3% peracetic acid based solution. The BCB-M600 is not conceived for “aggressive” sterilization solutions. For example phosphoric acid is too strong.

What is the volume of the sterilization solution container? 20 litres

How is the device controlled? The BCB-M600 has no commands. The machine rinses the bottles only when the user presses on the nozzles with the bottles neck.

Main components :

WATER FILTER

The filter for water or chemical solution including a micro-filtering cartridge of 0,45 μm (supplied apart in the machine package).

NOZZLES

The machines has 2 nozzles to rinse the bottles with the chemical solution and 2 blow the bottles with sterile pressure air.

CENTRIFUGAL PUMP

Operation process :

1. Fill the integrated tank with a chemical solution based on alcohol.
2. Check that the compressed air supply connection has been carried on properly.
3. Place two bottles manually on the 1st pair of spraying nozzles with the sterilization solution.
4. Push down the bottles without excessive pressure, until the chemical solution jet comes out from the jet.
5. Release the bottle after a few seconds.
6. Repeat the same order using two 2nd pair of the nozzles with pressurized air.

ATTENTION : NEVER PRESS THE NOZZLES MANUALLY, AS SHOWN ON FIG. ‘B’ – THE PRESENCE OF WATER / AIR UNDER PRESSURE COULD CAUSE SERIOUS INJURY ON YOUR FACE.

Optional equipment :

Stainless steel container for filter (AISI 316) and 60μm filtering cartridge (AISI 316) ……….  € 550,00