The NIG-PNOG-1450 is a powerful PSA (Pressure Swing Absorption) nitrogen generator with the production capacity from 2400 to 31200 liters of the nitrogen gas per hour (dipending on the purity required). Nitrogen is generated through pressure swing process thus providing purity levels 95% up to 99.999%. Max. pressure: 11 bar. The 270 liters pressure product buffer tank is recommended to be included in the set – see the optional equipment. An air compressor is not part of the nitrogen generator. Recomended solution for most of small breweries – the nitrogen is useful as an inert push gas (for transport of product between pressure vessels or into the dispensing equipment in the pub) instead of expensive CO2. Made in Germany.
About the PSA technology – Pressure Swing Adsorption
PSA-nitrogen purity levels to up to 99.9999% – to 10.800 Nm³/h
Nitrogen is generated through pressure swing process thus providing purity levels to up to 99.999%.
Nitrogen adsorption is based on two vessels filled with CMS active carbon, which are alternately fed with compressed separating the nitrogen and the oxygen.
The nitrogen is collected in a system vessel, the oxygen is released into the atmosphere.
All details which the customer wishes to measure, such as compressed air temperature, compressed air pressure, purity and pressure of the generated nitrogen, are monitored and protocoled continuously
PN On Go Nitrogen generators : Production capacity (Nm³/h) and purity (%) of N2 - Comparation of all types
|Nitrogen purity (%):||95,0||97,0||98,0||99,0||99,5||99,9||99,99||99,995||99,999|
|Residual O2 (PPM):||10.000||5.000||1.000||100||50||10|
|Technical Data & Connections|
|Dimensions LxWxH (mm)||745 x 810 x 1850|
|Operating / design pressure||11 / 7 bar|
|Net weight (kg)||310|
|Compressed air connection||G ½”|
|N2 output||G ½”|
|Silencer output||DN 63|
|Noise level||from 55 to max. 85 dB(A)|
|Ambient temperature||+5° C to +40 °C|
|Electrical connection||230V / 50Hz (110 V / 60Hz)|
|Power consumption||150 Watt|
|Safety class||IP 54|
Standard equipment :
|Inlet Micro filter||0,01 micron|
|Inlet Active carbon filter||0,003 micron|
|Outlet Fine filter (Product Vessel)||3 to 5 micron|
Optional equipment :
I. Nitrogen buffer tank
Recommened accessory for storage of produced nitrogen – enlarges lifetime of the nitrogen generator unit and ensures always enough capacity of pressurized nitrogen to use.
|Product Pressure Buffer Tank (optional)||Price : 1073 Eur|
|Pressure max||11 bar|
II. Flowmeter and dewpoint sensor package … 940 €
III. Temperature sensor … price on demand
IV. Pressure sensor … price on demand
V. Ambient oxygen analyser … price on demand
Benefits of the PN OnGo Nitrogen Generator
The Active Carbon
- High-quality activated carbon
- Works at 5 bar inlet pressure
- Low air factor / high efficiency
The Valve technology
- Compact and low-maintenance valve block
- Easy accessibility
- Redundant control valve
- Operational status indicators
- Slowly opening and closing pneumatic valves
The Touch Control Panel
- High efficiency, easy operation with our Touch Control Panel
- Multifunctional, colored 9-inch screen
- Alarm management
- Inlet filtration
- Outlet filtration
- Purity up to 99,9999% with our NKat-System
- with an air factor of 2.9
- Special design in Stainless Steel, ATEX, Redundant
- 24/7 accessibility
- 60% Cost savings
- Life up to 25 years
Recomended accessories :
Compressed Air Station SCROLL line industry with galvanized compressed air vessel, filtration and integrated air dryer. Oilfree air compressor with production capacity 9,6 m3 of 8 bar compressed air per hour. Motor power 1,5 kW, 90-liter compressed air vessel. Made in Germany.
Compressed Air Specification:
Max. pressure: 13 bar
Temperature range: 2 – 50°C
Air quality: according to ISO 8573.1
class 1 mud and oil
class 4 water
free of all contaminations (free of ozone)
Temperature range: 2 – 50 °C
Humidity: 10 – 80%
Terms of conditions and delivery
Warranty 12 months for the generator if maintenance intervals are correctly observed
Placement to be performed by purchaser – by instalation manual
Installation to be performed by purchaser – by instalation manual
Start up to be performed by purchaser / optional producer -> exclusive (surcharge)
Delivery EXW Herrsching IncoTerm
Shipping cost.. not included in price -> will be calculated individually
Packaging packed for a safe transport -> exclusive (surcharge)
Date of pick approx. 4-6 weeks after our bank has officially confirmed full receipt of payment
Payment 100% prepayment
Offer validity 10 weeks after issue date of quotation
Service cost rates
Following cost rates are valid for labour-, travel and waiting time hours, as far as the latter are under client’s responsibility.
They are valid for service performance realised at our premises, but also for working performed on client’s operation site. Principal installation performance is to be carried out on the basis of producer conditions for domestic installation. In this regard the terms for warranty and liability are particularly important.
As from 01.01.2011 the following rates are applicable:
Start-up Engineer/Installation-Engineer (also assignment of technical manager) … EUR 1.500 / day
Installation-technician/Commissioning delegate (also factory technician/supervisor) … EUR 1.300,00 / day
Supervisor/technician gas supply equipment … EUR 1000 / day
All rates listed above do not include VAT.
Surcharges for extra work, night shift premium, Sunday premium, travel expenses, Visa, and work on public holidays are to be agreed separately.
The daily allowance is calculated for 10 working hours – Europe. Travel costs, hotel accommodation and flight travel costs will be charged separately.
Spare parts and Service
Spare parts are available from us for up to 25 years.
Service is performed worldwide by German producer, as we are cooperating with agencies in many countries of the Globe.