Catalogue » Breweries, beer and cider production equipment – the product catalogue » FBC : Final beverage conditioning » PAS : Pasteurisers » PFL : Flow-through pasteurizers » EJPM-200 : Electric flow-through fruit juice pasteuriser 18kW 200 liters/hour, manual temperature control | for non-carbonated beverages

EJPM-200 : Electric flow-through fruit juice pasteuriser 18kW 200 liters/hour, manual temperature control | for non-carbonated beverages

 4988 excluding tax

Electrically heated flow-through pasteuriser with the heating capacity of 18kW, with the coaxial spiral heat exchanger and hot water circulating pump. This pasteurizer is designed for the production of fruit juice in small fruit juice making manufactures. Pasteurization capacity is approximally of 200 liters per hour.

SKU: EJPM-200 Category: Tags: ,

Description

Electrically heated flow-through pasteuriser with the heating capacity of 18kW, with the coaxial spiral heat exchanger and hot water circulating pump. This pasteurizer is designed for the production of fruit juice in small fruit juice making manufactures. Pasteurization capacity is approximally of 200 liters per hour.

How the pasteurizer works :

The juice tube of a smaller diameter is located inside a larger hot water pipe. Hot water and pasteurised juice move in the opposite direction of each other, ensuring that the juice is warmed evenly. The power of the pasteuriser is gradually adjustable according to the number of operating heaters.

The thermostat keeps the hot water temperature at a desired level selected by the user, which should be 4-5 degrees warmer than the temperature of the juice that comes out. The juice temperature is easy to monitor via a digital thermometer on the juice output and set via a control valve.

The pasteurizer is equipped with the float valve in the built-in internal tank which automatically opens the juice inlet from a source tank when level of juice in the pasteurizer falls and closes itself it when the pasteurizer is full. An external pump is required to feed the raw juice to the internal tank of the pasteurizer.

Main advantages :

Very easy to operate
High efficiency by counter flow
Designed to use with non-carbonated beverages
Even use with high viscosity liquid possible (such as tomato juice)
Produced in European Union

Technical specifications:

  • Rapid heating: ready for use in 15 minutes
  • Electrical heating performance: 18 kW (2 heating coils x 9kW)
  • Electrical connection: 3 phase / N / PE 400 V AC 50 Hz
  • Electrical connector: male CEE 5 pole 32 A
  • Mains cable: approx. 5 m
  • Fusing: 32 A
  • Juice inlet: NW 25
  • Juice outlet: NW 25
  • Juice amount: approx. 200 l/h at 80°C
  • Product content of the juice spiral approx. 4.5 l
  • Heating up time: approx. 15 min
  • Weight: approx. 150 kg
  • Length x width x height: 750 mm x 500 mm x 1400 mm

On pasteurizers type of EJPM-200, EJPM-300 and EJPM-450 the juice temperature is adjusted manually by changing the flow rate with controlled valve.

Additional information

Weight 170 kg
Dimensions 1200 × 800 × 1600 mm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.