BAA-100 : Beer automatic analyser

Simple beer analyzer to determine the most important parameters of all types of beer by thermal analysis and additional mathematical calculation.
The relatively low cost of the device corresponds to less accuracy of measurement, but it offers fast orientation with very good repeatability.

IMPORTANT !!

The appliance is suitable for a well-known and not too wide range of beers (type of beer) – the measurement is always done on the basis of standard calibration – a similar type of beer !! For measurement of unknown beer the analyser is not suitable – the calibration will not correspond to the measured beer!
Using the beer analyser you quickly determine the most important substances in beer:

Measurement principle:

•       The sample is sampled using the pump hoses into the measuring cuvette.
•       The alcoholic strength, extract and density content will be determined by thermal analysis.
•       Subsequently, the value of the extract, degree and osmotic pressure will be determined

The device excels with these features

• Simple and convenient operation
• Accuracy (high repeatability)
• Low price
• Small sample consumption of 10 ml
• Printing of the log
• Performance up to 100 samples / hour
• Saving calibration of 18 different beer samples
• Zero calibration for distilled water
• Supplied including a thermal printer

Main parameters :

• Dimensions: ( 300x 330 x 240) mm (BxDxH),Weight: 5 kg
• Cleaner:500ml, PE bottle
• Funke-Gerber Zero-Diluent:for daily zero calibration5l, PE container, sufficient for more than 100 calibration
• Sample Preparation
• Funnel:suitable for folded filters 9512 and 9513, PE, Dimensions: d=140 mm,l=170mm
• Conical flask: 1000 ml, narrow neck, borosilicate glass with graduation,DIN 12380. Dimensions: dopening=39mm,l=225mm
• Beaker: 800 ml,low form, borosilicate glass with graduation and spout
• Dimensions: d=94 mm,l=135
• Folded filter:100 pieces, diameter: 240 mm 100 pieces, diameter: 320 mm
• Other folded filters available on request.
• Ultrasonic bath R K 5 10:for degassing the beer sample and further laboratory tasks
• content: 9.7 l, made of stainless steel with timer and drain Internal dimensions:(240x150x300)mm (BxDxH)
  External dimensions: (325x265x305)mm (BxDxH), Weight: 7Kg