MFPU-900-MG : Mobile fruit processing unit 900 kg/hr

MFPU-900-MG Mobile processing unit – it is a compact solution of the fruit processing plant that is available anywhere and whenewer you need. Fully equipped mobile production set with all machines needed to crushing and pressing of juice from fresh fruit without transport of fruit and its storage. Achieve and fill into your tanks the best fruit beverage directly on place where fruit was harvested, only from fresh fruit. Capacity up to 900kg fruit per hour.

Galvanized steel chassis with aluminium anti-slip floor, and aluminium superstructure. The two sides and the rear side is openable in 90° angle. The openable fruit washer recieves the fruits from outside. After the grinding and pressing, the automatic juice collector transports the juice to the buffer tanks. Then the automatic pasteurizer does the heat treatment, and in the final step, the operator fills the end product in bags or bottles. The machine is as automatic as possible, it needs only 2 workers to operate. Very easy to clean. Requires minimal maintenance.

The MFPU-900 fruit processing unit includes :

Standard equipment and characteristics:

1. Trolley attachable to the car’s towing device
2. Electric switch box (for connection on electric socket on place with a power supply cable)
3. Fruit washing and crushing machine with capacity 900 kg/hr
4. Fruit belt press with capacity 900 kg/hr – end product maximum 800 liters / hr.
5. Fruit juice collection vat with the centrifugal pump
6. Flow-through pasteurizer ( diesel fuelled pasteurizer – automatic)
7. Filling station (for the filling juice into plastic bags)
8. Air compressor
9. High pressure washer
10. Buffer tank 450L to temporary storage of fruit juice
11. Heating performance: 80 kW
12. Fuel: propane, PB, natural gas or diesel
13. Fuel consumption: 7,5 L/h
14. Flue gas outlet: 110 mm chimney
15. Material: WNr. 1.4301, AISI 304 stainless steel
16. Dimensions: 6100x2200x2800 mm
17. Weight: ~2,5 tons (depends on the accessories and options)
18. IP65 certified electronics
19. Heat exchanger: soft water
20. Connections: DN 25 / DIN 11851

Optional equipment :

1. Diesel electric agregate 10 kW (for independence on electric connection)
2. Pallet bin tipper
3. Sorting table with a belt conveyor
4. Belt conveyor for fruit residues
5. Tanks for juice with bigger capacity
6. 300L freshwater tank
7. 300L waste water tank
8. Filtration system
9. Tent system
10. Custom graphic design on the outer surface
11. Many other accessories according to customer´s needs

Requirements for use :

Connection to drinking water under pressure with a hose

Electric demands: 3-phase 400V/50Hz 10 kW

Characteristics :

All machines are made of stainless steel. The trolley body is made of aluminium and it is covered with a tarpaulin. Optionally may be delivered with a tent system for fruit processing independently on weather.