FM-MV02 : Measuring turbine for the FM-VMS08 flow meter

Measuring turbine for one beverage line which is intended to be used with the the FM-VMS08 flow meter.

With the FM-MV02 measuring turbine, the FM-VMS08 device can be used in the food industry. The device is suitable for PreMix drinks, including measuring beer consumption.

Inlet / Outlet …. Outer thread BSP 1/2″ , inner diameter 5/8″ (Ready to be used with the John Guest hose adapters BSP 1/2″ (IT) > 5/8″ (9.5m) or 1/2″ (12.7mm)

Recommended position and orientation of the FM-MV02 measuring turbine :

Positioning of the FM-MV02 measuring turbine :

1. Source tank / keg with a drink
2. Flow-through cooler
3. Drink dispensing taps

Orientation of the FM-MV02 measuring turbine :

OK – the correct orientation

NO – the wrong orientation

Sanitation

We do not recommend cleaning the FM-MV02 measuring turbines with foam sponges, as this may damage the turbines.
Defects caused by this method of sanitation are not covered by the warranty conditions!
We recommend using chemical cleaning to clean the sensors. If foam sponges are used, the measuring turbines must be disconnected from the beverage line before cleaning.