CFSCT1-1xCFT-SNP-50H-AK Complete fermentation set with 1x CFT-SNP-50H – assembly kit

The complete beer fermentation set. This set CFSCT1-1xCFT-SNP-50H

includes all equipment necessary for professional production of beer using the pressureless fermentation process from wort using the fermentation and maturation process in cylindrically-conical fermenters. This set is also designed for fermentation of cider from fruit or carbonized wine. This set cannot be use for the maturation of beer or cider under pressure.

The set CFSCT1-1xCFT-SNP-50H consists of :

• 1 pc of simplified non-insulated cylindrical tank 50 liters (total capacity 60 liters) with one cooling zone
  •  the pressureless vessel for fermentation of beer (cider, wine)
• Compact water chiller with two digital temperature regulators, two temperature sensors, pump, cooler and heater.
• Hoses and fittings to connection between cooler and tank.
• Installation manual

Main advantage of this assembly kit

You can assembly all equipment for fermentation of beer yourself without expensive specialists – brewery-building team, electrician specialist, refrigeration technician specialists etc. Save your money and time. Buy the fermentation set, connect easy all components each other using a user manual and produce your own beer the same day.

Technical parameters

I. Cylindrical fermentation tank

Typical equipment of the Cylindrical fermentaton tank simplified CFT-SNP-50H

CFT-SNP-50H is the simplified non-pressure Cylindrical fermentation tank with usable volume 50 liters and total volume 60 liters for  fermentation (it is not suitable for maturation under pression, storage, filtering, bottling, filling into kegs) of beer, cider, wine and other beverages. Made of stainless food steel DIN 1.4301 (AISI 304). Maximal pressure 0 bar, non-insulated, with water (or glycol) cooling channels.

• Pure beer – tap, 3/4″ female thread
• Main tap 3/4″ female thread
• Double jacket 2 x 1″ male thread
• With cooling jacket
• Lid with hole for fermentation lock
• NW10 nozzle with blind cap for thermal sensor

… more about the cylindrical-conical tank CCT-SNP-100

II. Water cooler

Technical parameters :

Cooling power ….. 1200 W
Heating power ….. 2000 W
Refrigerant … R134A
Electrical connection … 220-240V/ 50Hz
Consumption … 1035W
Weight … 52.0 Kg
Pump displacement … 12.0 m

Dimensions :

… more about the glycol cooler

III. Temperature measuring and control system

The measuring and control system for temperature regulation in tank is buit-in the cooler.

The machine is fitted with two digital thermostats. The first thermostat allows to control the temperature in a water bath. The second thermostat is connected to an external sensor and is used to
adjust the temperature in the tank with beverage.

When the temperature changes, the circulation pump will automatically start. After reaching the desired temperature, the circulation pump automatically shuts off . Chilled or heated water is then
pumped into the heat exchanger.