Description
Ball valve 1″F (1-piece, easily dismountable, with reduced flow) with inlet-outlet connections BSP-G 1″ internal thread. This ball valve is designed to close and open the medium flow in the pipeline DN25 equipped with threaded ends BSP-G 1″ (external thread). Material : Stainless steel AISI 304.
Since the ball has a smaller diameter than the diameter of the connecting pipe, then it is a ball valve with reduced flow. There is a pressure lost and the flow rate increases.
Technical parameters and equipment :
- The ball valve consists of body with two ends of threaded necks BSP (female thread), the ball and the manual lever.
- Control is manual with the lever
- Connection No. 1 : BSP-G 1″ internal thread (female)
- Connection No. 2 : BSP-G 1″ internal thread (female)
- Pressure range: maximum 69 bar (1000PSI)
- Working temperature range: -20°C/160°C
- Material: body and ball 1.4301 (AISI 304), PTFE seat, PTFE seal
- Suitable for use with liquids, water, oil
This type of the ball butterfly valve is supplied in sizes BSP-G 1/2″ up to BSP-G 1 1/4″
| Inlet / Outlet Connection Type | BSP-G (internal thread) |
| Thread Dimension | 1″ |
| Internal Hole Dimension (flow diameter on the threaded neck, on the ball) | DN25 / DN15 |
| d (hole diameter) | 15.00 mm |
| L1 | 34.50 mm |
| L | 71.00 mm |
| H | 50.00 mm |
| W | 110.00 mm |
| Sp | 38.00 mm |
Reviews
There are no reviews yet.