BVB-2TC25 : Ball valve DN25 (full-flow) with connections : TriClamp / TriClamp (DIN 32676), stainless steel / B-design

Ball valve DN25 with inlet DN25 DIN 32676 “TriClamp” and outlet DN25 DIN 32676 “TriClamp”. For use with pipe lines or tanks equipped with DIN 32676 “TriClamp” DN25 throat-connection .

The ball valves are used to close and open the medium flow in the pipeline. When using the manual lever control, the ball valve has three basic positions: closed, open and half-open.

Closing of the ball valve with a regulating screw allows for greater accuracy of flow regulation. Control can be automated with electric or pneumatic actuators.

The ball valve consists of the valve body, two TriClamp flanges (Standard of DIN 32676), neck, ball, seal and control lever.

The internal seal of the valve is made of PTFE (teflon).
This type of the ball butterfly valve is supplied in sizes DN10 up to DN150.

The full-flow ball valve composition :

Technical parameters :

• 1st side connection – Standard DIN 32676 – TriClamp (inlet or outlet) DN25
• 2nd side connection – Standard DIN 32676 – TriClamp (inlet or outlet) DN25
• Type: Ball valve DN25
• Material: Stainless steel 1.4301 (AISI 304) / Stainless steel 1.4404 (AISI 316L)
• Valve control: manual, direct control
• Internal seal material: PTFE ( -50 ° C to 180 ° C)
• Operating temperature (recommended range for long time use) : -20 ° C to +150 ° C
• Maximal sanitation temperature: 170 ° C (maximally 25min)

Dimensional table :