CUPET-500: Naúrar capping kwalban don amfani da iyakoki a kan gilashin ko kwalabe na PET (har zuwa iyakoki 500-600 a kowace awa)

Na'urar capping kwalban da aka sarrafa ta iska wanda ya dace da rufe iyakoki na karkatarwa, ɗora kan ko tawul ɗin filastik (wanda ya dace da kwalabe na PET), tare da iya aiki har zuwa 500-600 bottes a kowace awa. Ma'aikacin ya sanya hular a cikin mashin turawa (don murɗawa ko robobin dunƙulewa) kuma yana tura maɓallan da aka sanya a ɓangarorin biyu na gindin injin. Shugaban rufewa yana gangarowa zuwa hular, yana rufe shi yayin da tsarin huhu ya toshe kwandon yana hana shi juyawa. Za a iya daidaita motar pneumatic da hannu har zuwa 11 Nm bisa ga karfin da ake buƙata don rufe hular da kyau. Dabarar hannu tare da counter yana ba da ma'anar madaidaicin tsayin kan. Ana iya yin wani ƙa'idar tsayi akan tsarin da ke riƙe da piston pneumatic.

CUPET-500 cikakkiyar na'ura ce ta pneumatic benchtop capping machine wanda ya dace da rufe duk nau'ikan gilashin ko kwalabe na filastik ko kwantena tare da iyakoki na filastik.
Cikakkun aikin huhu: ta danna maɓallan gefe guda biyu, kan mai zazzagewa ya sauko ya rufe capsules a wuyan akwati a cikin 'yan daƙiƙa kaɗan. Capper ya dace don rufe duk nau'ikan nau'ikan nau'ikan nau'ikan filastik filastik (misali, DIN61 iyakoki tare da iska, madaidaicin iyakoki tare da gasket HDPE, iyakoki, da sauransu).
Farashin ya haɗa da madaidaicin ribbed don amfani da tsari ɗaya na murƙushe filastik. Ga kowane ƙarin girman hula, dole ne a sayi ƙarin makullin mandrel.
Matsakaicin tsayin kwalban ko akwati shine 330 mm (akan buƙata yana yiwuwa don ƙirƙirar ginshiƙan capping don rufe kwalabe da kwantena tare da tsayi fiye da 330 mm). Ana iya ba da injin capping ɗin tare da ko ba tare da kulle kwalban pneumatic mai zamewa ba, kayan haɗi mai mahimmanci don hana kwalaben juyawa da faɗuwa yayin aikin capping.
Hakanan ana samun capper CUPET-500 a cikin sigar tare da riƙe wuyansa don PET da / ko kwalabe na filastik masu haske waɗanda dole ne a goyan bayan abin wuyan tallafi yayin aikin murɗa hula.

Ana amfani da naúrar ta iska mai matsa lamba - ba a haɗa da kwampreso iska ba.

Babban kaddarorin:

• Naúrar capping ɗin iska mai matsi wanda ya dace don rufe maƙallan murɗawa, karye a kan ko filayen dunƙule filastik (wanda ya dace da kwalaben PET).
• Mai aiki yana sanya hular a cikin chuck ɗin da aka yi na al'ada kuma yana tura maɓallan da aka sanya a bangarorin biyu na gindin injin. Shugaban rufewa yana saukowa ta atomatik zuwa hula yana yin rufewa.
• Nau'in capping ɗin yana sanye da abin wuyan da aka yi na al'ada don kwalban PET. Za'a iya daidaita kamannin pneumatic da hannu tsakanin 1.5 da 9 Nm, gwargwadon ƙarfin da ake buƙata don rufe hular da kyau.
• Ana amfani da dabaran hannu tare da ma'auni don yin daidaitaccen daidaita tsayin ma'aunin capping. Ƙididdigar ƙididdiga tana ba da ma'anar tsayin daka. Za a iya yin wani ƙa'idar tsayi akan tsarin da ke riƙe da duka naúrar capping.
• Ta wannan hanyar injin yana da yawa kuma yana iya rufe kwalabe na PET har zuwa 400 mm tsayi da 160 mm diamita.

Girma da manyan abubuwa masu aiki:

Yadda injin CUPET-500 ke aiki:

An ƙera na'urar CUPET-500 kuma an kera ta don ɗaukar kwalba ko kwalabe na kowane abu don abinci, sinadarai, kayan kwalliya, da masana'antar magunguna.

1. Sanya kwalban a kan injin capping a cikin sadaukarwa (A).
2. Sa'an nan kuma, sanya hular kwalba a ƙarƙashin screwing head (B).
3. Ta danna maɓallin kunnawa guda biyu (C) a lokaci guda, injin ɗin yana fara murɗa hular a kan tulun.
4. Da zarar an dunƙule hular a kan kwalbar, cire kwalban kuma sake fara aikin tare da sabon kwalban da hula.

Siffofin fasaha:

Teburin farashi:

Lura *** : Kayan aikin da aka ba da shawarar yin amfani da sashin capping tare da daidaitattun kwalabe na PET abin sha.

NOTE: Lokacin da aka sanya odar siyan, dole ne a aika samfurori na kwantena da iyakoki (pcs 3 na kwalabe na PET da 30 inji mai kwakwalwa na screwd caps don kowane girman). Ana buƙatar samfurori don tabbatar da tayin yanzu da kuma tsara tsarin rufewa.