BCFL-3000IC: kwalban matasan atomatik / iya cika layin - iya aiki har zuwa kwalabe 3000 ko gwangwani a kowace awa

Kwalban atomatik kuma yana iya cika layin BCFL-3000IC yana da cikakkiyar kayan fasahar cika kayan aiki tare da ƙarfin aiki har zuwa kwalabe gilashin 3000 ko gwangwani aluminium a awa daya.

(… wannan ƙarfin yana aiki don kwalabe gilashin 0.33L ko gwangwani na aluminum)

 

Sabuwar kwalban matsi na abin sha / iya cika layin BCFL-3000IC ya haɗa da naúrar monoblock HYBRID 12-12-1SC EPV (Monoblock wanda ya haɗa da rukunin kurkura, sashin cikewar matsi, rukunin capping kambi da rukunin rufe gwangwani) . Wannan shine farkon nau'in nau'in nau'in nau'in nau'in layi na counterpressure wanda ake samu akan kasuwa.

Ƙarfin aiki:
- Har zuwa 2400 inji mai kwakwalwa na 0.5 lt kwalabe ko gwangwani awa daya
- Har zuwa 3000 inji mai kwakwalwa na 0.3 lt kwalabe ko gwangwani awa daya

Kuna iya ɗaukar ƙarin girman daban-daban na kwalabe ko gwangwani tare da wannan layin. Na'ura ce mai sauƙin sassauƙa ta &. Abu ne mai sauqi qwarai don daidaita injin don amfani da kowane diamita daban-daban na kwalabe ko gwangwani a yanayin siyan ƙarin kwalban / iya sarrafa sassa (duba kayan aikin zaɓi) .

Layin cikawa na BCFL-3000IC, godiya ga ikon lantarki-pneumatic na bawul ɗin cikawa, yana ba da cikakkiyar madaidaicin saurin sauri kuma, dangane da giya da ciko cider, ƙarancin yuwuwar narkar da matakin oxygene.

Babban matakan aiki na injin:

1. Cika kwalabe ko gwangwani tare da carbon dioxide daga CO² na waje tankunan wadata
2. Sannan ana ƙirƙiri hatimin hatimi tsakanin kwalabe/gwangwani da bawul ɗin cika matsi
3. Fitar da cikin kwalabe/gwangwani ta hanyar samar da kwararar budurwa CO² don cire iskar oxygen a cikin kwalabe/gwangwani, kuma a lokaci guda ta hanyar fitar da iskar oxygen ta hanyar bawul ɗin cirewa.
4. Matsawa a karo na biyu kwalabe / gwangwani tare da CO² daga tankin kai da ke kan naúrar da daidaita matsi tsakanin kwalabe/gwangwani da tankin kai.
5. Sannan ana cika matsi-matsi
6. Da zarar an cika cika, akwai ɗan dakata don barin samfurin ya zauna a cikin kwalabe / gwangwani waɗanda ke taimakawa hana kumfa.
7. Degassing yana dawo da kwalabe / gwangwani zuwa matsin yanayi

 

Halayen injin cikawa:

■ Ƙididdiga mai dogaro na matakin cika ta amfani da tsawon bututun iska

∎ Cikewar iskar iskar oxygen godiya ga CO² flushing

n Rufewar da'irar CIP

■ Tsarin tsafta

∎ Ayyukan bawul mai cike da wutar lantarki mai sarrafa huhu don matsakaicin sassauci, wanda mai aiki ke sarrafa shi akan babban kwamiti mai kulawa.

∎ Mai ikon sarrafa kwalabe / gwangwani daban-daban daga 150ml zuwa 1000ml ta amfani da sassan musayar (kayan zaɓi)

∎ Mai ikon iya sarrafa girman nau'i-nau'i na iya ƙare (rufi na sama da ƙasa) 200, 202, 300 ta amfani da sassan musayar (kayan zaɓi)

∎ Tankunan tankuna na tagwaye suna aiki da kansu suna ba da damar layin cika ɗaya ta yi aiki yayin da ɗayan kuma yana tsayawa don kulawa. Wannan ingantaccen aiki ne ga rashin tabbas idan akwai gazawar cika bawul don ba da damar samarwa don ci gaba da motsi.

 

Layin cika kwalbar/ gwangwani ya ƙunshi waɗannan sassa da tubalan:

1. Depalletiser - Kayan aiki don lodi ta atomatik na kwalabe na aluminum / gwangwani kai tsaye daga pallets zuwa layin cikawa.
2. HYBRID 12-12-1SC EPV (Rinsing Unit/Rinsing Unit/Rukunin rufe kwalabe/Rukunin rufe gwangwani) - Injin monoblock atomatik don kurkura, cikawa da rufe kwalabe na gilashi ko gwangwani na aluminum
3. Naúrar lakabin kwalba/can – Mai amfani da lakabin liƙa mai ɗaure kai
4. Tsarin kayan aiki - Injin kwalabe / na'urar jigilar kaya tare da kwalabe / gwangwani fakitin kashe ƙarshen layin tebur

An tsara layin cika kwalban / gwangwani don sauƙin sarrafawa da sarrafawa tare da ma'aikaci ɗaya kawai.

 

 

---

Layin cika kwalbar gwangwani ya ƙunshi waɗannan manyan raka'a:

De-palletiser

Kayan aiki don lodawa ta atomatik na kwalaben gilashin fanko ko gwangwani na aluminium kai tsaye daga pallets zuwa layin cikawa.

The standalone kwalabe / gwangwani de-palletiser an tsara don amfani da karamin sawun sawun alhãli kuwa samar da damar iya aiki har zuwa 10000 kwalabe ko gwangwani a kowace awa. Mu de-palletiser yana ba da sassaucin sauƙi da sauri, canzawa tsakanin masu girma dabam ba tare da haifar da jinkiri mai tsawo akan samarwa ba.

• Cikakken kwalabe mai sarrafa kansa / tsarin saukewa.
• Haɗa duk girman pallet.
• SEW tuki da injina.
• SMC masu sarrafa pneumatic.
• Cikakken takardar shedar CE.
• Cire yadudduka mai sarrafa kansa.
• Ikon abokantaka na mai amfani ta amfani da allon taɓawa 4.3 ”.
• Zai iya ɗaukar duk girman kwalabe / gwangwani tare da daidaitawar firikwensin sauƙi.
• Cikakken tsarin tsaro da kulle-kulle.
• Haɗin lambar kwanan wata.
• Modulun rikodi mai yadudduka tare da kwandon kariya.

---

HYBRID 12-12-1SC EPVNau'in kurkura / Na'urar cikawa / Rukunin rufe kwalabe / Rukunin rufe gwangwani)

Injin monoblock na atomatik don kurkura, cikawa da rufe kwalaben gilashin da gwangwani na aluminum

• Rukunin kurkura tare da wurare 12 na atomatik don wanke kwalabe da gwangwani kafin aiwatar da cikawa
• Isobaric (counterpressure) tsarin cikawa tare da 12 atomatik electro-pneumatic cika bawuloli
• Samfur da za a cika : giya, carbonated cider, ruwan inabi, ruwan inabi mai kyalli, lemonade carbonated, ruwa mai carbonated, kombucha da dai sauransu. Hakanan za'a iya amfani da injin don cika abubuwan sha waɗanda ba carbonated ba.
• Nau'in kwalba: kwalabe na gilashi na yau da kullun - girman daban-daban daga 150ml zuwa 1000ml ta amfani da sassan musayar.
• Can iri: gwangwani na aluminum na yau da kullun - girman daban-daban daga 150ml zuwa 1000ml ta amfani da sassan musayar.
• Ikon cikawa: Har zuwa kwalabe 3,000 ko gwangwani / awa (kwalabe 330 ml / gwangwani)
• Ikon cikawa: Har zuwa kwalabe 2,400 ko gwangwani / awa (kwalabe 500 ml / gwangwani)
• Ciko zafin jiki: shawarar 0 ° C - 2 ° C don giya, cider
• Ƙungiyar rufe kwalban: 1-head capping machine for 26mm kambi iyakoki
• Iya rufe naúrar: 1-head capping inji ga aluminum iya lids
• Duk kayan aikin injin da ke hulɗa da samfurin suna cikin AISI 304 bakin karfe ko kayan filastik masu dacewa da abinci.

 

Bayanin naúrar kurkura:

• 12 kurkura kawunansu (electro-pneumatic isobaric cika bawul)
• Ana ba da kurkurawar kwalaba/gwangwani tare da maganin kurkurawa mataki ɗaya.
• Electro-valve don sarrafa ruwan kurkura. Bawul ɗin yana dakatar da kwararar ruwan kurkura a duk lokacin da injin ya tsaya kuma ya kunna shi a injin yana sake farawa.
• An raba gwangwani/kwalabe ta hanyar dunƙule infeed don ba da damar ƙwanƙolin ruwa don ɗaukar su.
• Da zarar a daidai matsayi , kwalabe / gwangwani suna karba ta hanyar pincers da kuma tayar da su a cikin sashin baya na rinser , inda jiragen ruwa na ruwa suna fesa cikin kwalabe da gwangwani da ruwa.
• Ana tattara ruwan magudanar ruwa ta hanyar tire a ƙarƙashin jiragen, kuma ana iya zubar da ruwan ko sake yin fa'ida, tacewa kuma a sake amfani da shi kamar yadda ake buƙata ( ƙarin kayan aikin zaɓi)
• Bayan an gama zagayowar kurkura sai a sake sanya kwalabe/gwangwani a kan bel ɗin isar da abinci kuma dunƙulewar infeed ta matsar da su zuwa ga filler kuma ana kawo ƙarin kwalabe / gwangwani kafin nan a cikin kurkura don tsaftacewa.

 

Bayanin naúrar cikawa:

• 12 cika shugabannin (electro-pneumatic isobaric cika bawul)
• Daidaita tsayin turret ciko ta atomatik
• Mashigan samfurin abin sha cikakke tare da bawul ɗin malam buɗe ido.
• Babban tanki yana samar da manometer s/karfe da ma'aunin zafi da sanyio.
• Abokin mai amfani 7" launi HMI kula da allon taɓawa & PLC
• Hasken launi 3 don nuna matsayi.
• Shigar da kwalabe / gwangwani ta amfani da auger
• kwalabe/Kwala-kwala ta amfani da faifan tauraro da jagororin waje
• Gears a cikin ƙarfe mai tauri da kayan filastik na musamman wanda ke rage buƙatun mai
• Ana ciyar da samfurin abin sha daga sama ta hanyar rarraba ta tsakiya, wanda aka yi da AISI 304 bakin karfe
• Babban diamita na gindin ƙwallon ƙafa don jujjuya ainihin ciko
• Cika bawuloli tare da buɗewa ta atomatik da jack ɗin ɗaga kwalabe / gwangwani
• AISI 304 bakin karfe cika bawuloli
• Daidaitaccen matakin ba tare da maye gurbin sassan ba
• CO2 allura kafin cika gwangwani da kuma ƙarin allurar CO2 na gaba a yayin lokacin ɗagawa da rufewa na bawul ɗin cikawa, da matsi ta atomatik na kwalban / gwangwani.
• Jacks masu ɗagawa don gwangwani, masu ƙarfin huhu. Ƙa'idar matsa lamba tana cikin ɓangaren lantarki.
• Bakin karfe matakin sarrafa bincike.
• Predisposition don sake zagayowar tsafta ta al'ada.

 

Ingantacciyar ƙira tare da sabbin abubuwa da yawa da haɓakawa gami da:

• Saurin zagayowar cikawa
• Integral brushless lantarki aiki, don ƙarin madaidaicin matsayi na kwalabe / gwangwani da sauri mai amfani mai amfani 7 "launi HMI kula da allon taɓawa & PLC
• Jimlar sarrafa zagayowar na'ura ta hanyar allon taɓawa
• Cikakken haɗin intanet don bincike na fasaha na software mai nisa da taimako
• Sauƙaƙen gani da samun dama daga kowane ɓangarorin ta hanyar buɗe kofa ta zahiri don kulawa cikin sauƙi
• Sassauci don cika kowane girman kwalabe na gilashi ko gwangwani na aluminum
• Sauƙaƙe da saurin kwalabe / gwangwani canza canjin
• Material: Firam ɗin na'ura an yi shi da bakin karfe AISI 304 kuma farantin tallafin injin an yi shi da fentin ƙarfe wanda aka lulluɓe da bakin karfe AISI 304

Cika turret da electro-pneumatic counter pressure valves

Counter-pressure cika turret, wanda aka kawo shi tare da bawul ɗin lantarki-pneumatic 12, wanda ya dace da cika samfuran carbonated a cikin kwalabe na gilashi ko gwangwani na aluminum.

• Daidaita tsayin turret ciko ta atomatik.
• Tushen da aka cika yana da tsarin cika tankunan tankuna guda biyu tare da madubi mai goge saman ciki da binciken sarrafa matakin atomatik.
• Cika daidaito matakin: +/- 2mm

 

Cika matsi mai jujjuyawa tare da ruwa CO²

Filler ɗin ya dace da cika matsi mai lamba tare da ruwa CO² don matsi na gaskiya na sanduna 3.

Tsarin ciyarwa yana aiki a cikin yanayin mataki-mataki na madaidaiciya kuma yana motsawa tare da kwalabe / gwangwani 6 daya bayan daya a cikin filler a kowane layi. Ana sanya kwalabe / gwangwani shida a ƙarƙashin bawul ɗin cikawa 6 yayin tsari guda ɗaya.
Tsarin cika daidaitattun guda biyu suna tabbatar da jimlar bawul ɗin cikawa 12 da fitarwa na kwalabe / gwangwani 3000 a kowace awa a cikin ingantacciyar hanyar cike da sarrafawa.

Lokacin da duk kwalabe / gwangwani sun isa daidai wurin cika su, bawuloli suna saukowa zuwa kan kwalabe / gwangwani suna haifar da hatimin hermetic, kuma sanya su cikin hulɗa kai tsaye tare da bawul ɗin cikawa, rufe wuyansa. A wannan lokaci zagayowar cika suna farawa kuma suna yin haka:

• Matsa gwangwani tare da CO² daga tankunan samar da matsi na CO2 na waje.
• Fitar da cikin kwalabe/gwangwani ta hanyar samar da kwararar budurwa CO² don cire iskar oxygen a cikin kwalabe/gwangwani, kuma a lokaci guda ta hanyar fitar da iska ta hanyar bawul ɗin snift.
Matsawa a karo na biyu kwalabe/gwangwani tare da CO² daga tanki mai cikawa
• Ana cika matsi tare da samfurin abin sha
• Tsayawa tsayawa don barin abin sha ya zauna a cikin kwalabe/gwangwani da hana kumfa
• Ragewa da shakar kwalabe da gwangwani

Tsarin ya haɗa da tsarin snift mai ɗimbin yawa don sakin matsa lamba CO² a cikin kwalabe/gwangwani a hankali kafin a fitar da gwangwani gaba ɗaya kuma a aika zuwa sashin rufe kwalabe/gwangwani. Kayan aikin ruwa na CO² yana bawa abokin cinikinmu damar isa mafi kyawun matakan TPO (Total Packaged Oxygen).

 

 

Bayanin sashin rufe gwangwani:

 

Za a iya tsarin rarraba murfi:

• Adadin layin rarraba murfi: biyu

Da zarar an cika gwangwani ana matsar da su daga na'urar zuwa ma'aunin gwangwani.

Yayin wannan tafiya, mai ba da murfi yana sanya murfi ɗaya akan kowace gwangwani da ta wuce ƙarƙashinsa.
Kafin ɗaukar murfi yana yiwuwa a ƙara CO² a ƙarƙashin murfin usibf na'urar cirewa don kawar da duk wani iska a cikin wuyan gwangwani.

A cikin ɓangaren sama na raka'a rarraba murfi akwai turret mai juyawa tare da kwantena cylindric guda 6 zuwa ciyarwar murfi. Za a iya cire kwantena na silindari kuma a cika su yayin da ake amfani da murfi. An cika silinda a kan layi a shirye don shigar da sauri cikin tazara. Kowace silinda na iya ɗaukar murfi 200 kowanne.
Ana samun ƙarin kayan kwantena cylindric don murfi don siyarwa azaman zaɓi don rage lokacin tsayawa tsakanin sake cikawa.

 

Za a iya naúrar rufewa (can ɗin mai ruwa)

Lokacin da gwangwani tare da murfi (yanzu daidai a matsayi), yana matsayi a ƙarƙashin kai mai ɗaukar hoto, piston pneumatic yana ɗaga gwangwani sama, yayin da rollers biyu suna motsawa don rufe iyawar zuwa jikin gwangwani.
Yanzu gwangwani yana shirye don shiryawa.

 

Bayanin naúrar capping kwalban mai kai-da-kai:

• Naúrar capping kwalban atomatik a cikin bakin karfe tare da madaidaicin kwalabe 3000 a kowace awa ya dace da aikace-aikacen kambin kambi tare da diamita Ø 26 mm akan kwalabe gilashi.
• Injin ya dace da aiki tare da kwalabe na gilashin silindi tare da diamita daga Ø 55mm zuwa Ø115mm da matsakaicin tsayi 370mm.
• An ɗaga shugaban capping ɗin injina, ana iya daidaita shi da hannu ta hanyar keken hannu kuma yana ba da damar aiki tare da nau'ikan kwalabe daban-daban.
• Ana ciyar da madafunan rawanin ta hanyar mai ba da jijjiga ta atomatik, photocell akan ƙugiyar kwalaba da na'urar tasha/fara don gujewa lalata abubuwan rufewa.
• Ana samun diyya ta ƙulli ta hanyar madaidaicin girgiza-absorber.
• Wannan rukunin capping ɗin kwalba an ƙera shi gaba ɗaya a cikin bakin karfe, kayan filastik da aka amince da su don amfani da abinci da kayan haɗin ƙarfe, yana sa tsaftace tsaftacewa da haifuwa cikin sauƙi da tabbatar da rayuwa mai tsawo.
• An kera dukkan sassan injin tare da kayan aikin injinan CNC.

Na'urar tana da:
• Saitin 1 na tauraro mai motsi da mai ɗaukar kwalabe na gilashin silinda
• Na'urar rufe don Ø26 mm kambi
• Kwano na gaba - nau'in rawar jiki
1 Manual na kulawa da aiki da jerin kayan gyara
• Masu gadin tsaro cikin bin ka'idodin CE a cikin sabon ƙira

 

Ruwa shawa a fitarwa daga monoblock:

 

---

Halayen gabaɗaya:

 

Tsarin:

• Material AISI 304 bakin karfe
• Manyan kofofi don dubawa da haske na ciki don kulawa na yau da kullun.
• An tsara tsarin firam ɗin don ba da damar zubar da ruwa mai sauƙi da aka zuba a ciki.
• Ainihin tsarin yana ɗauka: auger shigarwa, tauraro canja wuri, mai ɗaukar hoto
• Yana goyan bayan, a cikin Aisi 304 bakin karfe, tare da daidaitawa don daidaita mashin

Halayen injina:

• Ƙungiyar watsawa tana cikin tsarin tushe kuma an kafa shi ta hanyar babban kayan aiki da aka yi da ƙarfe mai ƙarfi, wanda ke tabbatar da ingantaccen motsi da shiru na kwalabe / gwangwani; yana rarraba motsi zuwa dukan tsarin.
• Babban kayan sarrafawa yana rarraba motsi zuwa tsarin duka.
• Gilashin tauraron don canja wurin gwangwani a shigarwa an gina shi tare da kayan filastik na musamman don kauce wa hayaniya da buƙatu don lubrication. Duk sauran kayan aikin an yi su ne da karfe.

Tsarin shafawa:

• Galibi injin mai mai da kansa ne. ƴan abubuwan ciki / waje da na sama na injin ɗin ana iya shafa su ba tare da wata alaƙa da samfurin abin sha ba.

Tsarin pneumatic:

• Tsarin pneumatic na tsakiya yana sarrafa ɗaga kwalabe / gwangwani ta amfani da jacks masu ɗaga pneumatic kuma an sanye shi da ka'idojin matsa lamba, tacewa, lubrication tare da matsa lamba da iskar iska zuwa kwalban / iya capping naúrar.

Ayyukan tsaro:

• Injin an sanye shi da kariyar aminci bisa ga ka'idodin CE
• Firam ɗin bangarorin an yi su ne da bakin karfe AISI 304, tagogin an yi su ne da kayan filastik na musamman.
• Akwai ƙananan buɗaɗɗiya a ƙofar da fita na bel ɗin jigilar kaya don sarrafa gwangwani.
• Yayin aiki, duk wani buɗe kofa yana dakatar da injin.

 

---

Taimakon nesa ta hanyar intanet

Interactive HMI interface a cikin PLC don sa ido kan samar da ci gaba, sarrafa sarrafa & da taimako na nesa.

Tsarin yana ba da damar ma'aikacin mu ya kasance kai tsaye tare da abokan cinikinmu idan akwai matsaloli.
Hanyoyin sadarwa guda biyu tsakanin na'ura da tsarin nesa suna ba da izinin gani a ainihin lokacin idan mai aiki yana aiki a hanya madaidaiciya akan allon taɓawa, kuma ana iya amfani dashi don sarrafa na'ura daga gefen mu don sa baki na ainihin lokaci (idan ya cancanta, don buƙatar abokin ciniki).

---

---

Na'urori na zaɓi:

---

Naúrar lakabin kwalba/can

Alamar layi ta atomatik tare da tashar lakabi guda ɗaya don amfani da takubban manne kai akan kwalabe/gwangwani na silinda ta hanyar sabon tsarin yin lakabin haƙƙin mallaka tare da rollers masu adawa. An tsara shi musamman don kwantena tare da ƙarancin juriya na jiki don matsa lamba, kamar gwangwani na aluminum.

Bayani na fasaha:

An tsara don amfani da shi	gwangwani cylindrical ko gilashin gilashi
Diamita na kwantena	daga 55 zuwa 120 mm
Tsawon kwantena	max. 350mm ku
Ƙarfin samarwa na sa'a	max. 4000 inji mai kwakwalwa a awa daya (mai aiki ga diamita 55 mm)
Yin lakabi da haƙuri	max. 1.5mm ku
Adadin tashoshin alamar	misali = 1, maximal = 2
Takarda ta wuce	170 mm
Max. diamita na label's reel	280 mm
Min. Lakabin faɗin	20 mm
Naúrar alama	wani zaɓi
Mai watsawa foil	babu
Naúrar laushi	babu
Motorization	Motoci masu hawa uku
Pneumatic wadata	4-6 mashaya, cinye 50 lita / min
Power wadata	3-lokaci 380-420V/ 50/60 Hz + maras kyau
Power amfani	0.8 kW
marufi	Akwatin katako (ba a haɗa shi cikin farashi ba)
girma	X x 225 85 190 cm
Netto nauyi	200 kg
An ɗora injin akan ƙafafun

 

---

Naúrar shirya kaya (na'urar tattara kaya ta nannade)

na'ura don tattara cikakkun kwalabe / gwangwani a cikin fakitin kwali

Musammantawa na fasaha:

• Kundin akwati ta atomatik tare da ciyarwar layi
• Ƙofofin kariya na zamewa tare da na'urar ragewa.
• Mujallar Blank a tsayayyen tsayi, sanye take da mai ɗaukar hoto.
• Photocell don hannun jari na kwali.
• Ƙarfin mujallar Blank: 300-400 inji mai kwakwalwa.
• Buɗe girman kwali: min 300 × 500 mm max 750 × 1300 mm - min 11.81 ″ x19.69″ mm max 29.53″ x51.18″ mm.
• Kaurin kwali: 3 mm.
• Tarin fakitin atomatik
• Mai isar da abinci ta layi tare da daidaitacce saurin da Inverter ke sarrafawa.
• Ciyarwar jeri ɗaya ko jeri da yawa.
• Photocell don canjin saurin isar da abinci.
• kasancewar samfurin photocells.
• Tara / sarrafa layuka photocells.
• Ɗaukar kwali ta hanyar hannu mai motsi tare da kofuna na tsotsa, da injin gearmotor ke tafiyar da shi kuma mai inverter ke sarrafa shi.
• Matsayi ta atomatik na kwali na karba da wurin sakin, wanda gearmotor ke tafiyar da shi kuma ana sarrafa shi ta hanyar encoder da inverter.
• Sanya kwali akan jagororin polizene, ba tare da tuntuɓar sarƙoƙin watsawa ba.
• Naúrar samar da lantarki wanda 4 gearmotors ke sarrafawa ta inverter da encoder, tare da daidaitawa ta atomatik na zurfin kwali.
• Hannun ɓangarorin ƙwanƙwasa don ja-gorancin faifan kwali.
• Load ɗin samfurin a cikin buɗaɗɗen katun U-dimbin yawa tare da axis 2 cartesian axis mai motsi mai motsi wanda servomotors 4 ke sarrafawa.
• Ƙofar tare da motsi na pneumatic tare da aikin buɗewa da jagorar samfurori.
• Rufe labulen gefe na ciki ta masu aikin pneumatic.
• Nadewa na babban ɓangaren kwali ta hanyar tsayayyen bambanci.
• Mota mai jujjuyawar zafi mai zafi mai narke manne applicator, sarrafawa ta inverter da encoder.
• 4 madaidaiciya madaidaiciya madaidaiciya maki.
• Rufe fafutuka na waje da squaring na ƙarar da aka gama ta hanyar masu aikin pneumatic.

 

Tsarin sarrafawa na Flxmod® sanye take da:

• Mai aiki Interface 7 ″ allon taɓawa mai cikakken launi yana zamewa duk tsawon injin
• Tsarin sarrafa PLC
• Inverter tare da hadedde encoder karatun
• IN/OUT sarrafawa kayayyaki
• 50 daban-daban memorisable aiki hawan keke
• 4.0 masu yarda da masana'antu
• An ƙirƙira kuma ƙera bisa ga ka'idodin CE.

 

Na'urorin haɗi:

Na zaɓi:

• Jagora don tsarin hanyoyi masu yawa 2/3.
• Canjin tsari.
• Mai rarrabuwa.
• Jagora don tsarin layi mai yawa, don masu rarrabawa, hanyoyin 3/4.

Bayani na fasaha:

• Ƙarfin wutar lantarki: 400V 3 PH + N + PE; 50 Hz.
• Max. karfin juyi: 9900 W.
• matsa lamba na iska: 6 mashaya – 87 psi
• Iskar da ake buƙata: 17 nl/fakiti.
• Matsakaicin tsayin fakiti: 350 mm - 13.78 ″
• Matsakaicin tsayin fakiti: 75 mm - 2.95 ″
• Production: har zuwa 25 ppm
• Girman injin: mm 4720 x 2290 x 2150-2310h -185.83" x 90.16" x 84.65"-90.94"
• Tsayin aiki: 945-1105 mm - 37.20"-43.50"

Halayen samfuran infeed:

Hanya guda ɗaya, don zagaye, murabba'ai da samfuran da ba na ka'ida ba

• max nisa 280 mm - 11.02 ″
• max tsawon 350 mm - 13.78 "
• max diamita 280 mm - 11.02 ″
• min diamita 40 mm - 1.57 ″

Hanyoyi 2 na ciyarwa, don samfuran zagaye kawai:

• max diamita 140 mm - 5.51 ″
• min diamita 40 mm - 1.57 ″

Hanyoyi 3 na ciyarwa, don samfuran zagaye kawai:

• max diamita 90 mm - 3.54 ″
• min diamita 40 mm - 1.57 ″

Shawarar zafin aiki: DAGA +10 C° ZUWA +35C°; abin sha>+10C° – DAGA +50°F ZUWA +95°F, KYAUTA >+50°F zafi muhalli: MAX 70%

Ingancin kwali da aka ba da shawarar:

• Corrugated kwali: 3 mm kauri
• Murfin waje a cikin takarda gwaji daga 150 zuwa 180 g/m²
• Ciki a cikin takarda gwaji daga 120 zuwa 140 g/m²
• Waviness na tsakiya a cikin takarda matsakaici daga 130 zuwa 150 g/m²

Takamaiman manne:

• Nau'in m: hotmelt.
• Danko a 170 ° C: 900 - 1100 mPas.
• Lokacin manne manne: gajere.
• Lokacin buɗewa: matsakaici.
• Yanayin aiki: 150 -190 ° C.

---

Jerin farashin:

GASKIYAR GASKIYA
KWATANCIN	FARASHI A EURO
Depalletiser ta atomatik (kwalabe / gwangwani)	akan bukata
HYBRID 12-12-1SC EPVNau'in kurkura / Na'urar cikawa / Rukunin rufe kwalabe / Rukunin rufe gwangwani)	akan bukata
Sassan tsarin kwalban gilashi ɗaya	hada da
Sassan don aluminum ɗaya na iya tsarawa	hada da
Sassan don tsari ɗaya na hular rawanin 26mm	hada da
Sassan tsari ɗaya na murfin gwangwani	hada da
Dummy kwalabe / kofuna don tsaftacewar CIP - don cika bawuloli & komawa zuwa tankin CIP	akan bukata
Kit ɗin wanke zafin zafin jiki a 85 ⁰C don amfani da maganin ƙwayar cuta mai zafi a cikin tsarin CIP	hada da
Photocell yana sigina tarin iyawar a wurin fita da kunna kwalabe/tasha tasha	akan bukata
Injin kwalabe / na'urar jigilar kaya tare da kwalabe / iya shirya kashewa / tara ƙarshen layin	akan bukata
Zaɓin zaɓi
Naúrar lakabin kwalban linzamin kwamfuta	akan bukata
Naúrar shiryawa – tare da sassa don tsarin fakitin kwali ɗaya	akan bukata
Tsarin isar da kwalban / gwangwani - za a ƙididdige farashi na gaske bayan za a tabbatar da shimfidar ƙarshe tare da abokin ciniki	akan bukata
Ƙungiyar kulawa don tsarin kwalabe / iyawa - za a ƙididdige farashin gaske bayan za a tabbatar da shimfidar wuri na ƙarshe tare da abokin ciniki	akan bukata
Cables da na USB trays - za a ƙididdige farashin gaske bayan za a tabbatar da shimfidar ƙarshe tare da abokin ciniki	akan bukata
Jimlar farashin layin ciko ba tare da rukunin lakabi ba kuma ba tare da na'urar tattarawa ba	akan bukata
Jimlar farashin layin cikawa tare da rukunin lakabi kuma ba tare da na'urar tattarawa ba	akan bukata
Jimlar farashin layin ciko ba tare da rukunin lakabi ba kuma tare da sashin tattarawa	akan bukata
Jimlar farashin layin cikawa tare da rukunin lakabin kuma tare da sashin tattarawa	akan bukata

 

ZABI GA HAURAN 12-12-1SC EPV MONOCK
KWATANCIN	FARASHI A EURO
Tsarin sinadarin nitrogen na ruwa (an bada shawarar lokacin cike samfuran da ba carbonated)	akan bukata
Bawul mara dawowa samfur	akan bukata
Kayan gaskets don bawuloli 12 masu cikawa	akan bukata
Na'urar da aka yi amfani da ita kafin aikace-aikacen murfi - ruwan zafi wanda abokin ciniki zai bayar (x2)	akan bukata
Na'urar fesa bayan fitarwa daga ma'aunin gwangwani don wanke saman gwangwani daga kumfa mai yawa	akan bukata
Modem tare da haɗin Ethernet don taimakon software mai nisa	akan bukata
Sassan don ɗaukar ƙarin tsarin kwalabe/gwangwani masu murfi iri ɗaya	akan bukata
12 ƙarin bututu matakin cika - ana buƙata don kowane ƙarin matakin cika da ake buƙata	akan bukata
Abubuwan da ke hulɗa da samfurin abin sha a cikin bakin karfe AISI 316	akan bukata
2x musayar sassa don naúrar ɗinkin gwangwani don rufe ƙarin tsarin murfi (ya haɗa da kayan aikin haɗe-haɗe, chute da cikakken jujjuyawar atomatik mai ɗaukar kaya tare da tashoshi 6 - kowanne don fakitin harsashi tare da murfi)	akan bukata
Sanitary dunƙule don samfurin ciyar famfo tare da duk wani bututu haši	akan bukata

 

---

Sharuɗɗan tallace-tallace:

Biyan : 50% gaba ajiya tare da sa hannu oda, ma'auni kafin jigilar kaya.

bayarwa lokaci : Yawancin lokaci watannin kalanda 5 EXW - tun lokacin da aka karɓi odar & na biyan kuɗi na gaba na 50% da isar da duk samfuran da cikakkun bayanai na fasaha (ban da Agusta & Disamba).

marufi : Ba a haɗa ba

Kudin bayarwa : Ba a haɗa ba

Installation : Ba a haɗa ba

garanti : wata 12. An cire shi daga garanti kayan lalacewa na yau da kullun, lalacewa saboda amfani da ba daidai ba, saboda rashin kulawa ko rashin kulawa da lalacewa ta hanyar gyare-gyaren da gyare-gyaren mu ba su yi ba. Hakanan an keɓe kayan lantarki, ƙarƙashin garantin masana'antun nasu (duba cikakkun sharuɗɗan ciniki da ke kewaye don cikakkun bayanai na garanti).

Banda :

• Haɗi zuwa wasu na'urori
• Ƙarin kayan aiki da zaɓuɓɓuka idan ba a haɗa su cikin farashi ba
• Matsayin inji
• Tsarin gine-gine da gyare-gyaren su
• Takaddun shaida na dubawa da hukumomin da aka yarda suka bayar
• Duk abin da ba a bayyana a sarari a cikin tayin ba

 

Sabis na zabi:

I. Aikin shigarwa a wurin…. Akan bukata

Farashin yana aiki ga duk ƙasashen Tarayyar Turai. Farashin ya haɗa da aikin kwanaki goma (+ balaguron kwana biyu) na ƙwararrun ƙwararru biyu a wurin - haɗuwa da farawa da kayan aiki.

Farashin bai haɗa da: jigilar farashi da kuma biyan ma'aikata ba. Za a ƙididdige mutum.

 

II. Abokin ciniki ya tabbatar da aikin shigarwa (tare da taimakon mu na nesa)…. Akan bukata

Kuna so ku adana kuɗin ku? Shin kuna ƙwararrun fasaha kuma ba ku tsoron ƙalubale? Shin dokokin hana tsaftar ƙasarku ba su yarda da ziyarar ƙwararren masani daga wata ƙasa ba? Kada ku ji tsoron amfani da sabis na taimako na nesa.

 

Yaya shigar da layin cika ta abokin cinikinmu, ta amfani da taimakon mu na nesa?

1.) Abokin ciniki ya sanya duk injinan kuma ya haɗa su zuwa ikon jagorancin jerin abubuwan mu.

2.) Da zarar an aika da hotuna na kammala matakin farko za mu ci gaba tare da farawa da ƙaddamarwa.

3.) Da farko muna haɗa PLC na injin ta hanyar intanet zuwa na'ura mai ba da hanya tsakanin hanyoyin sadarwa a cikin masana'antar mu - wannan yana ba manajan sabis damar dubawa da sarrafa PLC ɗin ku akan allon nesa, kamar dai yana gaban injin a cikin mutum.

4.) Sa'an nan kuma mu shirya kiran taro na Ƙungiyoyin Microsoft, tare da ɗaya ma'aikacin ku yana riƙe da kyamara, da sauran suna aiki tare da umarnin ma'aikatan mu.

5.) Bayan kwanaki 3-5 kawai saitin da daidaitawa, na farko cikakken kwalabe ko gwangwani za su bar layin cika ku.

 

---