Hauj lwm
NANO TOP is a digital temperature controller of the NANO SYSTEM for one tank, with a display of actual and target temperature.
The device can easily be installed wherever you want. The matching mounting plates are also available. The NANO TOP can be operated centrally using the NANO TERMINAL unit. The control unit and its functionality can be significantly expanded this way.
Four variants are available :
- NANO TOP – TC : Digital temperature controller – with display of the current and desired temperature and control buttons
- NANO TOP – US : Universal sensor controller for a sensor with output voltage range 0-10V, 1-5V, 0-5V, 0-20mA, 4-20mA, (for e.g. pressure sensor, CO2 sensor, humidity sensor, etc.) For use only with the NANO TERMINAL.
- NANO TOP – SK : Switch unit for the collective contacts – if you use additional the NANO TERMINAL then you need this unit. This unit runs the pump (cooling pump and/or heating pump) on demand (automatic).
- NANO TOP – KM : Switch unit for easy “monitoring” the cooling unit (AquaSnap or AquaZero). For use only with the NANO TERMINAL.
Cov teeb muaj:
- NANO TOP : Digital controller (TC or US or SK or KM) – with display of the current and desired temperature and control buttons
- Wall brackets
- Polycarbonate vaj tsev
- Compatible with the NANO TERMINAL
Tsis txawj:
NANOTOP – TC
Digital temperature controller
- Zaub: Lub hom phiaj thiab qhov kub thiab txias
- Qhov tseeb: +/- 0.5 °
- Kev daws teeb meem: +/- 0.1 °
- Qhov siab: -9.9°… + 99.9°C
- Tswj system: PID
- Kev ua haujlwm hom: txias, ua kom sov
- Rear side: Sleeve: circa. 7 x 240mm
- Casing: Yas, PC (Polycarbonate) nrog GF
- Ua haujlwm kub: -10 ~ + 40 ° C
- Kev tawm tswv yim: 24V AC +/- 10%
- Txuas cable: 6 Meters (braided hlau)
- Dimensions: WxHxD: 100x120x330 mm
- International protection code: IP65
NANOTOP – US ID21-23
Universal sensor controller for a sensor with output voltage range 0-10V, 1-5V, 0-5V, 0-20mA, 4-20mA, (for e.g. pressure sensor, CO2 sensor, humidity sensor, etc.) For use only with the NANO TERMINAL.
- Sensor Input 0-5V, 1-5V, 0-10V, 0-20mA, 4-20mA
- Output below setpoint 24 VAC (SUB1)
- Output exceeded setpoint 24 VAC (SUB2)
- Output alarm 24 VAC (SUB3)
- Case: plastic, PC (polycarbonate) with GFS
- Ambient temperature range: -10 .. + 40 ° C
- Mounting brackets: Included
- Supply: 24V AC +/- 10%
- Switching outputs: 24V AC, 2A
- Dimensions: WxHxD: 170×150
- Environment protection : ID65
Pom zoo:
- For easy and universal installation we recommend our mounting kit or our VARI ALL mounting plate for fast mounting on the mesh tray.
- For the continuation and signaling of the output signals we recommend for each output a NANO SWITCH with bright LED beacon and a Relay with potential-free switch and a toggle switch for maintenance.
NANOTOP – SK ID30
Switch unit for the collective contacts – if you use additional the NANO TERMINAL then you need this unit. This unit runs the pump (cooling pump and/or heating pump) on demand (automatic).
- Output heating request 24 VAC (SUB1)
- Output cooling request 24 VAC (SUB2)
- Output collective alarm 24 VAC (SUB3)
- External heating request input potential-free NO contact (EXT3)
- External cooling request input potential-free NO contact (EXT4)
- Case: plastic, PC (polycarbonate) with GFS
- Ambient temperature range: -10 .. + 40 ° C
- Mounting brackets: Included
- Supply: 24V AC +/- 10% Switching outputs: 24V AC, 2A
- Dimensions: WxHxD: 170x150x80 mm
- Environment protection : ID65
Pom zoo:
- For easy and universal installation we recommend our mounting kit or our VARI ALL mounting plate for fast mounting on the mesh tray.
- For the continuation and signaling of the output signals we recommend for each output a NANO SWITCH with bright LED beacon and a Relay with potential-free switch and a toggle switch for maintenance.
NANOTOP – KM ID31
Switch unit for easy “monitoring” the cooling unit (AquaSnap or AquaZero). For use only with the NANO TERMINAL.
- Output request: 24 VAC (SUB1)
- Output cooling / heating: 24 VAC (SUB2)
- Output setpoint 1/2: 24 VAC (SUB3)
- Input alarm circuit A: potential-free NO contact (EXT3)
- Input alarm circuit B: potential-free NO contact (EXT4)
- Case: plastic, PC (polycarbonate) with GFS
- Ambient temperature range: -10 .. + 40 ° C
- Mounting brackets: Included
- Supply: 24V AC +/- 10%
- Switching outputs: 24V AC, 2A
- Dimensions: WxHxD: 170x150x80 mm
- Environment protection : ID65
Pom zoo:
- For easy and universal installation we recommend our mounting kit or our VARI ALL mounting plate for fast mounting on the mesh tray.
- For the continuation and signaling of the output signals we recommend for each output a NANO SWITCH with bright LED beacon and a Relay with potential-free switch and a toggle switch for maintenance.
Nano System – powerful modular system for a cooling of the tanks
Ua tiav cov txheej txheem niaj hnub modular zoo rau kev txias cov tank - Tsim thiab tsim los ntawm LiquoSystems hauv lub teb chaws Yelemees.
Xyuas
Muaj cov kev xyuas tsis tau.