description
The single belt press FBP-400MG is designed for pressing of fruit mass. Fruit mass is placed on the continuous belt which presses it against cylinders. The obtained juice flows in the collection trays under the press. Production capacity up to 400 kg of fruit per hour.
Main properties and demands :
- Ganz aus Edelstahl AISI 304 / 1.4301 gemaach
- Kontinuéierlech Dréckprozess.
- Yield up to 75% (depending on the kind, freshness and quality of the fruits)
- Niddereg Oxidatioun an héich Qualitéit vu Must a Cider
- Pressen vun Uebst mat enger gradueller Erhéijung vum Drock
- Variabel Geschwindegkeet vum Gürtel
- IP65 zertifizéiert Elektronik
- Liewensmëttel industriell, massiv Polyester Gürtel - 2mm déck, Dicht: 6 × 16 Filament / cm2, ½ Taux (gëeegent fir grouss faserfräi Jus)
- Héichdrock Wäschmaschinn Nofro: 360 L / h
- Kompresser Loft Nofro: 50 L / h 6 Bar
- Gebaut-an inverter: steplessly metallen Rimm Vitesse
- Fully automatic operation, with closed work area, reduces the fruit mash oxidation to the minimum.
- In the bottom of the machine, there are two spinning washer heads guarantees optimal cleaning during the process.
- The distance between the press cylinder and the juice collector tray is reduced to avoid the fruit juice foaming.
- The belt press can be disassembled without any tools in few minutes!
- Ganz einfach ze botzen.
- With 4pcs of the adjustable vibration-free feet.
- Verlaangt minimal Ënnerhalt.
- Both an external high-pressure washer and air compressor are essential for operating.
Technesch Parameter:
Längt | 1425 mm |
Breet | 1310 mm |
Héicht | 1197 mm |
Belt width / thickness | 600 mm / 2 mm |
Gewiicht | 620 kg |
Verbonne Kraaft | 1.5 kW / 6 A. |
Elektresch Fuerderungen | 1 phase ~ 230V 50 Hz (6A) |
Material | WNr. 1.4301, AISI 304 Edelstol |
Muecht | 400 kg / h |
Yield (Effizienz) - ofhängeg vun enger Varietéit vun Äppel a Presszäit (Hierscht, Wanter, Fréijoer) | up to 75% (it depends on the kind, freshness and quality of the fruits) |
Kaméidi Emissioun Niveau | 60-70 dB |
Schlauchverbindungen an der Maschinn:
Beschreiwung (Zweck) | Schlauchverbindung op der Maschinn | Absicht fir |
Héichdrock Waasser (fir de Gürtel ze botzen) | Nilfisk Schnellkupplung männlech oder M22x1.5 thread männlech | Nilfisk Quick coupler weiblech oder aner quick coupler mat M22x1.5 thread weiblech |
Drock Loft Inlet (6 bar) | Schnellschlauchkuppler fir Drockluft 1/2 ″ männlech | Schlauch 3/4 ″ mat Schnellschlauchkuppler fir Drockluft 1/2 ″ weiblech |
Optional an Ersatzdeeler:
Ersatzgürtel | € 680, - |
Rezensiounen
Et sinn nach keng Kritik.