Products » TGS : System of technical gases » NIG : Nitrogen generators » NIG-NM300P PSA Nitrogen Generator 450 liters of 99% N2 / hour

NIG-NM300P PSA Nitrogen Generator 450 liters of 99% N2 / hour

 6050 excluding tax

The NIG-NM300P is a nitrogen generator based on a pressure swing adsorption (PSA) gas separation method with the production capacity up to 450 liters of the nitrogen gas per hour (with 99% purity). Max. pressure: 8 bar. An oil-free air compressor is built-in the nitrogen generator.  In addition, the generator is equipped with a built-in gas mixer which can provide two different mixtures of same.Very cheap solution for small breweries – the nitrogen is useful as an inert push gas (for transport of product between pressure vessels or into the dispensing equipment in the pub) instead of expensive CO2.   Made in Germany.

SKU: nm300p Category: Tag:

Description

Print Friendly, PDF & Email

The NIG-NM300P is a nitrogen generator based on a pressure swing adsorption (PSA) gas separation method with the production capacity up to 450 liters of the nitrogen gas per hour (with 99% purity). Max. pressure: 8 bar. An oil-free air compressor is built-in the nitrogen generator.  In addition, the generator is equipped with a built-in gas mixer which can provide two different mixtures of same.Very cheap solution for small breweries – the nitrogen is useful as an inert push gas (for transport of product between pressure vessels or into the dispensing equipment in the pub) instead of expensive CO2.   Made in Germany.

The package includes :

  1. Compressor, gas separation module
  2. Electronic control unit with display for compressor pressure and nitrogen pressure.
  3. Gas blender for CO² and N²
  4. The nitrogen generator is ready for operation after connection to the power supply and the pressure vessel.

 

 

About PSA technology

nig-A300-500pAdsorption is the adhesion of atoms, ions, or molecules from a gas, liquid, or dissolved solid to a surface. This process creates a film of the adsorbate on the surface of the adsorbent. This process differs from absorption, in which a fluid (the absorbate) is dissolved by or permeates a liquid or solid (the absorbent), respectively. Adsorption is a surface-based process while absorption involves the whole volume of the material. The term sorption encompasses both processes, while desorption is the reverse of it. Adsorption is a surface phenomenon.

 

Technical specification

 

Output values are given in liters per hour and based on an ambient temperature of 20 ° C and an air pressure
of 1013 mbar at a delivery pressure of 8 bar (g).

Purity of the Nitrogen :
  • 99.0 % … 450 liters per hour
  • 99.5 % … 400 liters per hour
  • 99.9 % … On request

+ in addition, the amount of CO² that is mixed. Mixtures 15-85% CO² are possible. Adjustment according
to customer specification. Standard Mix is 1 30%, mix 2 50% CO².

 

Parameters

Purities of up to 99.99% are possible
Max. Delivery pressure of nitrogen 8.0 bar (g)
Max. Delivery pressure mixed gas 6.5 bar (g)
Ambient conditions 5 – 40 ° C
Air quality normal clean ambient air, free of solvents and other contaminants
Relative humidity <90%
Dimensions (LxWxH) : 900 x 500 x 250 mm
Weight : 40-60 kg
Input ports : 1x 1/4″ CO2
Ouput ports : 3x 1/4″
Noise level : < 65 dB
Power supply : 230V 50 Hz
Electric. protection (CE) : IP22

The devices are designed for wall mounting or for installation on the floor indoors
Pressure vessel: as an option are pressure vessels according to EN 286 available

 

 NIG-A-2gasmix-01

 

 

Additional information

Weight 45 kg
Dimensions 400 × 290 × 1360 mm