» » MM-1800 Malt mill 1800 kg/h

MM-1800 Malt mill 1800 kg/h

760516900 excluding tax

The best Czech professional machine for preparation of malt with production capacity from 1500 to 1800 kg per hour.  A powerful electrical mill for preparation of malt grist from malted grains. Wide cylinders ensure the required access to endosperm without any damage of external parts of grains, that are important for later easy filtration of wort through a grains layer during a wort processing. The MM-1800 roller mill is a device made for a crushing of grains.  We recommend using this model for microbreweries with a volume of the brewhouse up to 2000 liters.

Product Enquiry
SKU: MM-1800 Category: Tag:
   

Description

The best Czech professional machine for preparation of malt with production capacity from 1500 to 1800 kg per hour.
A powerful electrical mill for preparation of malt grist from malted grains. Wide cylinders ensure the required access to endosperm without any damage of external parts of grains, that are important for later easy filtration of wort through a grains layer during a wort processing.
The MM-1800 roller mill is a device made for a crushing of grains.  We recommend using this model for microbreweries with a volume of the brewhouse up to 2000 liters.

 

Manufacturer’s statement

We produce this machine since 1993. Tested and approved by the State testing laboratory for agricultural, forest and food processing machines according to law No. 30/1968 on state testing. A declaration of conformity was issued to this machine according to law No. 22/1997 Coll. A definite evaluation of this product was made by the Czech State veterinary administration

Description

mm-1800-dimensions

The speed and direction of the rotating grinding roller are derived from the drive roller, which rotates in the opposite direction to the second drive roller, the cylinders are connected by means of an intermediate gear wheel with a ratio of 1: 2.

The speed and direction of the cylinder are based on a drive roller that rotates in the opposite direction to the drive roller; The rollers are connected by a gear ratio of 1: 1 ratio.

Alternatively, the product can be delivered without a stand. (with a wall shelf or a similar steel frame).

The stand is made of welded steel tubes and has a rectangular contour and it has a good stability.

Removable steel frame in which working rollers are placed. The drive roller is firmly assembled in bearings and is driven by an electric motor with V-belts. The second roller is assembled in a sliding guide. The rollers have an opposite direction of rotation. There is a device (driven by electric motor) to fit bags in the bottom part of the case.

A hopper completes the device so that it is possible to operate with the device either by a conveyor or manually.

 

 

 

Specifications

Indicator Unit     Value
Diameter of rollers mm 215.5
Length of rollers mm 300
Height of the roller unit module mm 400
Stand heights (low, high) mm 360, 800
Bagging device height mm 1410
Height of the hopper mm 400
Total machine height
With low stand mm 1160
With high stand mm 1600
With bagging stand mm 2210
Output and nominal el. motor current:
3x380V, 50Hz, 1448 rpm (grinder) kW; A 7.5; 14.3
3x380V, 50Hz, 970 rpm (crimper) kW; A 5.5; 12
Machine output acc. to degree of fineness:
Grinder t/hour 1.2 – 2.2
Crimper t/hour 1.2 – 1.8
Fluting of grinding rollers cm-1 4; 5.5; 7
Weight of roller module unit kg 460
Weight of stand (low, high) kg 25, 35
Weight of bagging stand kg 87
Weight of hopper + loosener kg 27 + 6
Recommended gap width
Grinding: wheat, barley, oats mm 0.2
Grinding: maize, peas mm 0.5
Grind for cattle and poultry mm 0.5 – 0.8
Crimping of grain mm 0.2 – 0.6
Minimum working gap mm 0.1
Maximum recoil mm 20
Hopper slide gate stroke mm 5

 

 

Material and surface protection

The device is made mainly of steel – grade 11 (with regard to the functionality of the components, their wear resistance and good welding properties). The machine surface is protected by paint. All parts are standardized Czech-made elements.

 

Casing

The machine is designed to operate in a flammable dust environment with a maximum temperature of + 40 ° C and a minimum temperature of -20 ° C. All electrical equipment corresponds with Czech standards.
The machine was designed to operate under mild climatic conditions and has an IP 54 rating.

 

Noise

The noise value done by the machine is 86 dB(A) – crimper and 81 dB(A) – grinder. The noise values were measured at a distance of 1 m from the machine at a height of 1.5 m in place for the attending worker.

 

Packaging, transport and storage

The roller machine is not covered. The customer should arrange the delivery (the manufacturer is able to deliver the machine upon an agreement). Before the installation, it is necessary to store the roller machine in such a way that it is protected from damage and climatic influences.

 

Claims and warranty

The manufacturer, according to production documents, is responsible for the operation, used material and machine production.
The manufacturer warrants the machine for the period specified in the warranty certificate provided that the customer uses the machine in accordance with this manual.

The warranty does not apply in these cases:

  • The machine was used for other purposes than those it was designed for
  • The handling was improper (wrong operation, storage, insufficient maintenance)
  • The customer has the machine modified without the manufacturer’s written agreement
  • The warranty is applied according to Law No. 09/64 Coll., in the full text of Law No. 80/89 Coll. and amendment No 103/90 Coll.

 

Servicing

Every repair during the warranty period and after-sales repairs are carried out by the manufacturer who guarantees service under the terms of the sales contract or operating conditions.The customer has the right to know the service terms before signing the contract.

 

 

Additional information

Weight 600 kg
Dimensions 1200 x 954 x 1640 mm
Power supply connection

Malt mill output system

Number of mill units

single – two rollers, double – four rollers

Reviews

There are no reviews yet.

Be the first to review “MM-1800 Malt mill 1800 kg/h”

Your email address will not be published. Required fields are marked *

  • Selection Required: Select product options above before making new offer.
  • Offer Sent! Your offer has been received and will be processed as soon as possible.
  • Error: There was an error sending your offer, please try again. If this problem persists, please contact us.

I want to buy for another price

To make an offer please complete the form below:







Please wait...