Products » BPT : Beverage production tanks » BBT : Cylindrical storage tanks » BBTVN : Cylindrical storage tanks : vertical, non-insulated » FMT-SLP-200H : Round-bottom tank, non-insulated, cooled by liquid, 200/240 liters 1.2 bar (simplified fermenter)
NOW DISCOUNT!

FMT-SLP-200H : Round-bottom tank, non-insulated, cooled by liquid, 200/240 liters 1.2 bar (simplified fermenter)

 3879 4299 excluding tax

FMT-SLP-200H is the simplified low-pressure beverage round-bottom tank with usable volume 200 liters and total volume 240 liters for both fermentation and maturation of beer, cider, wine and other beverages, made of stainless food steel DIN 1.4301 (AISI 304). Adjustable  pressure from 0bar to 1.2bar, non-insulated tank or partitially insulated with a simple insulation jacket (depending on the choosed version) , with water (or glycol) cooling channels.

 

Clear selection
DISCOUNTS : 2% discount for ordering from 4 to 8 pieces. 4% discount for ordering 9 or more pieces.

Description

Print Friendly, PDF & Email

FMT-SLP-200H is the simplified low-pressure beverage round-bottom tank with usable volume 200 liters and total volume 240 liters for both fermentation and maturation of beer, cider, wine and other beverages, made of stainless food steel DIN 1.4301 (AISI 304). Adjustable  pressure from 0bar to 1.2bar, non-insulated tank or partitially insulated with a simple insulation jacket (depending on the choosed version) , with water (or glycol) cooling channels.

 This offer and price includes the tank which is equipped with the most common equipment. This equipment may be replaced or supplementedand with other accessories described in the section “Optional accesories”

 

 

Non-insulated version :

FMT-SLP-200H Round-bottom fermenter, non-insulated, cooled by liquid, 200/240 liters 1.2 bar

Partitially insulated version :


Main features:

  • Pressure top arched dome : NW 400
  • Safety valve mounted on top layer
  • Type plate for the identification of the container
  • Multi use connection: nozzle NW 25 DIN 11851 welded on the top arched bottom – intended for T-adapter to the connection of carbon dioxide valve and adjustable pressure valve or sprayhead holder NW 10 for a cleaning of the tank.
  • Threaded neck for connection of the sample valve NW 10 DIN 11851
  • Temperature measuring-welded threaded connector NW 10 DIN 11851
  • Pure product drain outlet BSP 1″ ET (external thread)
  • Sediment / yeast drain outlet BSP 1″ ET (external thread)
  • Double jacket 2 x BSP 1″ ET (external thread)
  • Adjustable pressure from 0bar to 1.2bar using the special setting apparatus which is mounted on the top arched dome

 

 

Advantages :

  • The tank is designed for both fermenting and maturating (under pressure) larger quantities of beer (or cider, wine).
  • Material : Stainless steel AISI 304
  • The special 3D inner surface facilitates cleaning
  • With double cooling jacket at the tank cylinder for the easy automatically water cooling during the maturation and fermentation process
  • Made in compliance with the guidelines for pressure equipment PED 2014/68/EU including approval from Germany’s Technical Inspection Agency (TÜV)
  • The double cooling jacket is equipped with two threaded necks to connection of a water cooler.
  • The tank stands stably and safely on three legs.
  • Several useful available accessories for expanding of the tank.

Drawing of the basic tank :

 

Drawings of the FMT-SLP-200HBT beer fermentation tank

 

PositionDescription
APressure door
BPlate for type plate
CThreaded neck NW10 DIN 11851 SC 13x1.5
DThreaded neck NW10 DIN 11851 SC 13x1.5
EThreaded neck G1"AG : Drain of pure product
FBolted strut 40x8
GRectangular profile 50x30x2 - 360mm
HFlat foot 40x5-100
ICooling jacket inlet / outlet : 2x Threaded neck G1"
JTube with internal thread G 1/2" DIN 2986
KThreaded neck NW25 DIN 11851 SC 29x1.5
LArched bottom DIN 28011 t=2.5 (min 1.5)
MArched bottom DIN 28011 t=2.5 (min 1.5)
NCooling jacket
OThreaded neck G1"
PPipe NW 25 DIN 11850
QWelded joint of bottom and cylindrical part
RCorner weld
SPipe knee NW 25 DIN 11850 29x1.5
TScrew joint M10x20
UStrut 40x8
VStrut 40x8
XLeg - connection with a strut
YTop view
ZLeg system - top view

Dimensions

Usable volume [liters] 200
Total volume [liters] 240
Total height [mm] 1550
Total diameter [mm] 550
Weight of empty tank [kg] 65
Weight of full tank [kg] 305

 

 

Standard properties, design and equipment

Maximal allowed overpressure 1.2 bar
PED 2014/68/EU certificate yes
Germany’s Technical Inspection Agency (TÜV) certificate yes
Inner surface – surface quality of the stainless steel sheets 3D
Inner surface – roughness of the welds Ra<0.8μm
Cooling channels (double jackets) yes
Insulation of the tank optionally
Pressure arched top bottom NW400 yes
Safety overpressure valve mounted on top arched bottom yes
Type plate for the identification of the container yes
Multi use connection: nozzle NW 25 DIN 11851 moulded on top layer. It is prepared to mounting of the T-adapter for the connection of carbon dioxide valve and plug apparatus or sprayhead holder NW 10 for cleaning >> See optional accessories bellow … yes
Double jacket cooling channel in/out 2x 1″ ET yes
Nozzle for sample cock  NW10 DIN11851  >> See optional accessories bellow … yes
Threaded thermometer socket NW10 – To mounting of the thermometer or the temperature sensor of the control system. See more about it yes
Pure product drain outlet 1″ ET yes
Sediment / yeast drain outlet 1″ ET yes
Stable legs  [pcs] 3 pcs
Automatic temperature control system >> See optional accessories bellow … optionally

 

 Recommended use

Usable for the fermentation process yes
Usable for the maturation process yes
Usable for the storage of the finished product yes
Usable for the non-pressure product flotation yes
Usable for the product clearing under pressure yes
Usable for the product filtration under pressure no
Usable for manual filling of the product into kegs yes
Usable for manual filling of the product into bottles yes
Usable for machinery filling of the product into kegs no
Usable for machinery filling of the product into bottles no

Example accessories (included in this configuration)

t-pipe-adapter-pressure-tanks-100x100T-adapter

T-adapter allows the connection of carbon dioxide valve and plug apparatus or sprayhead holder NW 10 for cleaning.

description

pressure-adjusting-apparat-100x100

Pressure adjusting apparatus

To adjusting of the pressure inside the tank during the fermentation or maturation process. Fits on T-adapter piece, connection IT ¾“ with coupling nut.

description

co2-reduction-valve-100x100

CO2-cut-off cock

The reductor valve between CO2 hose and T-adapter.  Fits on T-adapter piece. IT–ET ¾“

description

sampling-cock-01-100x100

Sampling cock type 1

To tasting of beer, cider, wine directly from the tank.

description

 ss-ball-valve-for-tanks-1inch-100x100Stainless steel ball valve 1″

To connection of hose between tanks and other equipment (pump, brewhouse, filter, other tank …)

 description

 ss-drain-valve-for-tanks-1inch-100x100Stainless steel drain valve 1″

To discharge the full content of the tank.

description

 

Optional accessories (for surcharge)

 

sampling-cock-02-100x100

Insulation jacket

Recommended equipment of the tank for save cooling power and for tanks placed in non-cooled space. The additional insulation is positoned only on the cylindrical part of the fermentor.

description

Carbonization stone

The candle with a porous stone for the saturation of the beer, wine or cider by compressed oxygen, carbon dioxide, nitrogen or other technical gas, when the beverage is in the tank under pressure.

description

sampling-cock-02-100x100

Sampling cock type 2

To tasting of beer, cider, wine directly from the tank. Compatible with the sampling spiral.

description

sampling-spiral-02-100x100

Sampling spiral

To reducing of foam during the tasting of beer with the sampling valve.  It is designed  for use with simplified stainless steel pressure fermenting / maturating tanks and the sampling cock type  2.

description

thermometer-analog-100x100Thermometer analog NW10

To mounting into the threated jacket NW10. May be replaced by the temperature sensor of the control system.

description

 cip-nozzle-pressure-tank-100x100CIP sanitizing nozzle

To easy cleaning and sanitizing of the tank . It is optionally mounted on the NW10 instead the T-adapter during the tank sanitizing process.

description

Reduction from G 1″ (IT) to TriClamp DIN32676 (D=50.5 mm)

For connection of the tank (internal thread BSP G1″) with the beverage hose with the DIN32676 DN 25 (Disc diameter 50.5mm) connector.

description

Reduction from G 1″ (IT) to DN25M DIN11851 (ET)

For connection of the tank (internal thread BSP G1″) with the beverage hose with the DIN11851 DN 25 (NW 25 external thread) connector.

description

Reduction from G 1″ (IT) to DN32M DIN11851 (ET)

For connection of the tank (internal thread BSP G1″) with the beverage hose with the DIN11851 DN 32 (NW 32 external thread) connector.

description

Reduction from G 1″ (IT) to DN40M DIN11851 (ET)

For connection of the tank (internal thread BSP G1″) with the beverage hose with the DIN11851 DN 40 (NW 40 external thread) connector.

description

Disc valve NW 40 DIN 11851 (ET)

To connection of the hoses – filling and discharging the tanks, discharging of pure beverage product above sediments.

description

clc-03-100x100Water (glycol) cooler for one single tank

Compact water (or glycol) cooler with integrated digital temperature controllers and temperature sensor (fully equipped temperature control system for use with a single tank). Cooling capacity 1200 W is sufficient for cooling of the insulated tanks up to 1000 liters or non-insulated tanks up to 500 liters.

description

Water (glycol) cooler for four tanks

Compact water (or glycol) cooler with four integrated digital temperature controllers and temperature sensors (fully equipped temperature control system for use with four tanks). Cooling capacity 2300 W is sufficient for cooling of the insulated tanks up to 2000 liters or non-insulated tanks up to 1000 liters.

description
cooler-100x100

Water (glycol) cooler for more tanks

Water cooler from 0.85 to 10 kW for simultaneous cooling more tanks. You need also use the measuring and temperature control system.

description

control-systems-tanks-components-manual-100x100Temperature measuring and control system

Fully equipped temperature measuring and control system for simultaneous cooling more tanks. You need also use some water cooler with cooling capacity according of number and total volume of the tanks.

description

STTC-FC180C-100x100Compact temperature controller for one tank

Fully equipped compact temperature measuring and control system for cooling one tank (each tank requires one piece of the controller). Includes digital controller, temperature sensor, regulation valve. You need also use some water cooler with cooling capacity according of number and total volume of the tanks.

description

NANOPILOT : MultiTank Controller for 1-5 tanksCompact temperature controller for 1-5 tanks

Fully equipped compact temperature measuring and control system for cooling one up to five tanks. Includes digital controller, temperature sensors, regulation valves. You need also use some water cooler with cooling capacity according of number and total volume of the tanks.

description

CIP-32CIP-32 cleaning and sanitizing station

The CIP-32 is a mobile machine to the cleaning, sanitizing and sterilization of tanks and piping routes. The device consists of two separate containers with nominal volume of 30 liters, one centrifugal pump, electric control panel, manual valves and all installation pipes as well.

description

 


How to choose the right type of CCT ?

Type of CCTCCT-SNPCCT-SLPCCT-SHP
Maximal adjustable pressure in the tank0.0 bar1.2 bar2.5 bar
Usable for the fermentation processyesyesyes
Usable for the maturation processnoyesyes
Usable for the storage of the finished productnoyesyes
Usable for the non-pressure product flotationyesyesyes
Usable for the product clearing under pressurenoyesyes
Usable for the product filtration under pressurenonoyes
Usable for manual filling of the product into kegsnoyesyes
Usable for manual filling of the product into bottlesnoyesyes
Usable for machinery filling of the product into kegsnonoyes
Usable for machinery filling of the product into bottlesnonoyes

 


 

Our recommendation:

If you are comparing our prices with competitors, please always make sure that any other manufacturer guarantees the same quality as our company offers.

 

 

Additional information

Weight 70 kg
Dimensions 600 × 600 × 1750 mm
Variant

No insulation, Simple insulation

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.