Products » MCS : Measure and control systems » TMC : Temperature measure & control systems » TMC components » MTTC : Multi tank temperature controllers » CTTCS-B20 Cabinet for the tank temperature control system – 20 cooling zones

CTTCS-B20 Cabinet for the tank temperature control system – 20 cooling zones

 1679 excluding tax

The steel CTTCS-B20 cabinet for the CTTCS-B20 central tank temperature control system allows an automatic monitoring and manual controlling of the most important parts of beer fermentation and maturation process (from 1 to 20 cooling zones of tanks) using only one control cabinet . This cabinet have to be equipped with 1 up to 20 pcs of STTC-FC150C controller card. The controller cards are not included in price of the cabinet. IP55 insulation class.

Description

Print Friendly, PDF & Email

CTTCS-B20 Cabinet for the tank temperature control system – 20 cooling zones

The steel CTTCS-B20 cabinet for the CTTCS-B20 central tank temperature control system allows an automatic monitoring and manual controlling of the most important parts of beer fermentation and maturation process (from 1 to 20 cooling zones of tanks) using only one control cabinet . This cabinet have to be equipped with 1 up to 20 pcs of STTC-FC150C controller card. The controller cards are not included in price of the cabinet. IP55 insulation class.

CTTCS-B20-02

 

CTTCS-B20 allows measuring and control of :

  1. HWT – heat water tank
  2. ITWT – ice treated water tank
  3. ICWT – ice cooling water tank
  4. LCS – glycol medium cooler
  5. Beer tanks :
    • CCT – cylindrical-conical tanks
    • OFV – opened fermentation vats
    • BBT – bright beer tanks

 

Description

A fundamental factor in producing great beer, wine or cider is a well-controlled fermentation process. The brewer or wine maker can control the temperature means of regulating the fermentation process. It is not only about reaching the “optimal” temperature but rather about having the right temperature at each stage of the process. An electronic temperature control offers safety in the fermentation and maturation, save time, energy, costs, and above all, serves to greatly improve the quality of your wine.

The control cabinet CTTCS-B embodies a very convenient and efficient method of electronic temperature control. The cabinet is installed on the winery wall. There is a control card for each tank. All cards are installed in the cabinet. Enabling direct supervision and management in one central spot. Having made the installation, the changing and addition of controllers in the cabinet is a child’s play.

CTTCS-B receives its input through a sufficiently long temperature sensor – available as accessory, placed in each tank. Each controller is equipped with a double display that shows the actual and the preset temperature separately. Additionally, a LED light shows the actual mode of operation: cooling or heating. In addition, the control cabinet has an integrated common-relay for the pump-control and another common-relay for the activation of temperature-alarms.

The CTTCS-B control cabinets are available in various models and sizes: for up to 10, 20, 30, 40 or 50 controllers, in coated steel or stainless steel.

The CTTCS-B-System is the ideal solution for all winemakers that prefer a central temperature display and temperature control directly in the cellar. The CTTCS-B is compatible with the FermInfo software. If computerised, all temperature regulation could also be carried out from the office computer. Additionally, the CTTCS-B control cabinets can be full integrated in the FermInfo bus system.

 

Characteristics

• Central control cabinet in 5 different sizes: up to 10 / 20 / 30 / 40 / 50 controllers
• Various models: coated steel or stainless steel.
• Separated displays for the set and actual temperature
• Optical alarm signal
• Heating and cooling possible
• Common relay for pump control and alarms signals
• PC interface
• Can be fully integrated in the VinInfo bus system

 

Technical details

• Slide-in card controller
– Range of temperature: -9,9 up to +99,9 °C or 14,2 up to 99 F
– Voltage: 24 V / AC +/- 10%
– Output: Solenoid valve 24 V AC / 30 VA
– Modes of operation: cooling, heating, cooling and heating, display, off
– Controller structure: 3-Point, PI, PID
• Cabinet
– Electric power supply: 230V / 50 Hz / 16 A
– Type of protection: IP 55
– Material of the cabinet: steel

 

 

Recommended set for measurement and control of 20 cooling zones :

1. Central cabinet

CTTCS-B10 Cabinet for the tank temperature control system – 20 cooling zones

CTTCS-B20

The steel CTTCS-B20 cabinet for the CTTCS-B20 central tank temperature control system allows an automatic monitoring and manual controlling of the most important parts of beer fermentation and maturation process (from 1 to 20 cooling zones of tanks) using only one control cabinet . This cabinet have to be equipped with 1 up to 20 pcs of STTC-FC150C controller card. The controller cards are not included in price of the cabinet. IP55 insulation class.


2. Temperature controllers

STTC-FC150C Single tank temperature controller FermContCard for cabinets × 20

sttc-fc150c

The STTC-FC150C Single tank temperature controller FermCont for cabinets is used in Breworx breweries and cider lines for measuring and control of temperatures in tanks (HWT, ITWT, ICWT, CCT, OFV, BBT …). This temperature controller is designed as a card for instalation into the CTTCS-B series cabinets. One STTC-FC150C controller measures and control temperature in one cooling zone.  All the measuring and control system is Designed in Germany.

 

3. Termosensors for each cooling zone

TSC-08 Temperature sensor for CTTCS cabinets 8 Meter, water proof × 20

TSC-08-temperature-sensor

Temperature sensor for CTTCS cabinets 8 Meter, water proof . Temperature range: from  -9,9 to +99,9 °C . Sensor lenght : 10mm, Ø 8mm. Compatible with CTTCS cabinets Breworx.

 

4. Regulation valves

STTC-SV15-24VS Solenoid valve DN15 24VAC, Stainless steel × 20

zs1-water-solenoid-valve-002

STTC-SV15-24VS is a stainless steel water electromagnetic solenoid valve with working voltage 24 V AC for tank temperature control systems using in minibreweries Breworx. It is intended for pipes DN15 (G 1/2″) – these are the usual input and output connections for cooling duplicators double jacket for stainless steel tanks. Each STTC-SV15-24VS valve is connected with TTC system and controlled by STTC-FF178 microprocessor temperature controller or some other manual or automatic tank temperature control system with working voltage 24 V AC.

 

5. Connection box

STTC-CB100F Connection box for the FermCont temperature controller FIX/IP65 × 20

STTC-CB100F

The STTC-CB100F is a connection box for the STTC-FC178F Single tank temperature controller or CCTTS Central control tanks cabinets. It is used for the connection between the STTC-FC178F controller, the power supply and (optionally) the control computer. The STTC-CB100F and the STTC-FC178F FermCont are equipped for a fixed installation. All the this measuring and control system is Designed in Germany.

 

6. Cables a connectors

CCK-100 Cable & connector kit for TTMMCS – one cooling zone × 20

cables-mar-001

Cables and connector for power and data connecting of all components (one cooling zone) with TTMMCS manual tank temperatrure control system.

 

 

 

Additional information

Weight 3 kg
Dimensions 600 × 300 × 400 mm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.