Microbrewery BREWMASTER BSB-201-F75SNP

1251419531 1201319005

Microbrewery BREWMASTER BSB-201-F75SNP with the brewhouse Brewmaster BM-200 and 2 pcs of a simplified fermentation tank 250 liters allows the production capacity up to 7.500 liters of top fermented beer or 4.500 liters of bottom fermented beer per year using only an infusion brewing method. A simple plug&brew design allows an assembling all microbrewery by customer and easy brewing. Patented brewhouse with computer support produces 220 liters of beer wort per one batch. No requirements for building reconstruction.

Manual or semi-automatic control of the brewing process, media and tanks with PLC controllers and PC Windows support.

The beer fermentation process is realized in the pressureless stainless steel tank. The beer maturation process is realized in the PET bottles or beer kegs.

This set includes 2 fermentation sets – the set includes either the stainless steel fermentation tank, the water cooler with two digital temperature regulators and  the thermosensor, or only one fermentation egg cooled by air.

SKU: BSB-201-F75SNP Categories: , , Tag:
   

Description

Microbrewery BREWMASTER BSB-201-F75SNP with the brewhouse Brewmaster BM-200 and 2 pcs of a simplified fermentation tank 250 liters allows the production capacity up to 7.500 liters of top fermented beer or 4.500 liters of bottom fermented beer per year using only an infusion brewing method. A simple plug&brew design allows an assembling all microbrewery by customer and easy brewing. Patented brewhouse with computer support produces 220 liters of beer wort per one batch. No requirements for building reconstruction.

Manual or semi-automatic control of the brewing process, media and tanks with PLC controllers and PC Windows support.

The beer fermentation process is realized in the pressureless stainless steel tank. The beer maturation process is realized in the PET bottles or beer kegs.

This set includes 2 fermentation sets – the set includes either the stainless steel fermentation tank, the water cooler with two digital temperature regulators and  the thermosensor, or only one fermentation egg cooled by air.

 

Starting-set-brewmaster-bm-200

 

Technical parameters :

 

Production capacity – daily :

  • 200 liters of beer wort per day – one batch within 12 hours – source raw materials are malt or malt extract, hops, drinking water and brewer’s yeast
  • 400 liters of beer wort per day – two batches within 24 hours – source raw materials are malt or malt extract, hops, drinking water and brewer’s yeast
  • 600 liters of beer wort per day – three batches within 24 hours – source raw materials are malt extract, hops, drinking water and brewer’s yeast

 

Production capacity – yearly :

  • Beer produced using the on surface fermentation method ……… 7.500 liters per year
  • Beer produced using the under bottom fermentation method ….  3.750 liters per year

 

Raw material :

  • Classical raw materials : Malt + hops + drinking water + brewer’s yeast + (optionally other ingrediences)
  • Beer concentrates : Malt extract + hops + drinking water + brewer’s yeast + (optionally other ingrediences)
  • Washing and sanitizing agents

 

Control system :

  • Brewhouse – boiling equipment :
    • valves and claps – manual or automatic control with PCL support
    • temperatures – manual or automatic control with PCL support
    • motors, pumps – manual or automatic control with PCL support
    • timing – manual or automatic control with PCL support
  • Tanks – fermentation :
    • temperatures – automatic control (
    • timing – manual control
  • Pressure vessels – maturation
    • Basic solution – beer maturates in PET bottles, PETainers or aluminium beer kegs
    • Optional solution – beer maturates in pressure vessels
  • Media – hot water, ice water, wort cooling, glycol tank :
    • temperatures – manual control
    • timing – manual control

 

Required space for building :

  • Floor area min : 6 m2
  • Room height min : 2.4 m

 

Electrical connection :

  • Electrical socket : 400V 3ph / 50 Hz
  • Electrical consumption : 14 kW

 

Heating system – brewhouse :

  • Electric heating elements

 

Cooling system :

  • Cooling of wort : Drink Cold water directly in the brewhouse and in fermentation tanks
  • Cooling of fermenting tanks – by water using the water cooler with digital temperature control
  • Cooling of maturating vessels :beer in PET bottles, PETainers or keg – cold air in the cooled room or regrigerator

 


Description of the beer production process with this Brewmaster system

 

1. WORT BREWING PROCESS :

PROGRAMMING – Depending on the recipe, the Brewmaster BM-200 brewing system is programmed with the appropriate brewing times. The brewing process starts by switching over to automatic brewing. The control system guides the user through the various steps and executes the four brewing phases automatical

MASHING – Depending on the recipe and method, water is poured in and heated up to 38 °C. Then the malt pipe with the sieve inserts is put in position. Malt is poured between the sieve inserts. The malt pipe is fixed with bracket and drawbar.

MASHING / BREWING – The pump switches on. Due to the resulting  water / wort  circulation, he starch is extracted from the malt. The four brewing phases
are executed as programmed, for example as follows:

  1. Protein rest 55 °C,  approximately  5 min
  2. Maltoserast 63 °C,  approximately  30 min
  3. Saccrification rest 72 °C,  approximately  20 min
  4. Saccrification rest 78 °C,  approximately  10 min

LAUTERING – At the end of the four phases an acoustic signal sounds. The subsequent lautering process is quickly executed by simply removing the malt pipe. In the case of the BM-200 this is done by means of the lifting device. Allow to drain a few minutes and remove – if necessary, pour water through the malt (sparge) to achieve a better yield.

BOILING HOPS – With the lid open, the wort is boiled for 80 minutes with hops being added several times. The evaporated water is to be replaced by adding
fresh brewing water. The original gravity can be finally adjusted by adding or leaving out water. The drawbar on the Nanobeer serves as a level meter. At the end of the boiling phase, an acoustic signal sounds again.

COOLING WORT – After boiling, the wort is cooled as soon as possible to the fermentation temperature by a special wort cooler directly inside the brewhouse.

2. BEER WORT FERMENTATION / MATURATION PROCESS

Fermentation of beer wort

– Immediatelplastic-fermentation-egg-340x540y after the boiling of the beer wort the temperature of the wort is brought to the level of the fermentation temperature by a wort cooler. The fermentation process is realized in pressureless fermentation tanks using the cooler with digital temperature regulators. . The maturation of beer is realized directly in PET bottles or beer kegs (which are placed in a cooled room or refrigerator). If the fermentation egg is choosed then the plastic fermentation vessel has to be cooled by air in the insulated cooled room.

Maturation of beer wort

– The maturation of fermented beer wort is realized directly in PET bottles or beer kegs (which are placed in a cooled room or refrigerator).

 

This set includes 2 fermentation sets – the set includes either the stainless steel fermentation tank, the water cooler with two digital temperature regulators and  the thermosensor, or only one fermentation egg cooled by air.

 

CFS-CT1CCT-SNP-EN-Complete-beer-fermentation-sets-central-cabinet

 

 

 

3. CONSUMING OF BEER

– After several weeks of storage in bottles or in a maturing tank (optional accessory), the well cooled beer can be consumed.

beer-consuming

 


 

Recommended accessories :

 

1. HBA-BM100 BREWMASTER mobil

The wireless internet module

  • for the supervision of the brewing process within the wireless local area network via wireless internet router
  • for the update of the BREWMASTER BM-200 control system to the latest software (firmware)
  • network standard: IEEE 802.11 b/g/n
  • software for update: PC with at least windows 7 or higher

bm-mobil-01

 

 

 

2. BMTM-200 Thermo sleeve for the BREWMASTER BM-200

BMTM-200 Thermo sleeve is a recommended accessory for the BREWMASTER BM-200 brewhouse. This is used as jacket for insulation to speed up heating and saving energy. The thermo sleeve is also very recommended for use when is requirement for more than one brew cycle per day.

 

3. SBT2 – Set of brewing tools for Brewmaster breweries

Set of brewing tools for BREWMASTER and NANOBEER small breweries. This set includes :

  1. Hydrometer and support plastic cylinder – The hydrometer is basic measurement tool for  measuring original gravity of wort and beer – this is important for calculation of the percentage of alcohol in the beer, cider or wine. This set includes a noncalibrated hydrometer with temperature correction and support plastic cylinder.
  2. Large malt shovel – for handy removing malt from the brewhouse after lautering process.
  3. Cleaning set – set of tools for easy cleaning of the brewhouse, tanks and hoses.
  4. Malt barrel – the plastic vessel for easy collecting of the milled malt under the malt mill
  5. Wooden mash paddle – for handy occasional agitation of wort during the brewing process

sbt2-brewery-tools

 

 

Reviews

There are no reviews yet.

Be the first to review “Microbrewery BREWMASTER BSB-201-F75SNP”

Your email address will not be published. Required fields are marked *

  • Selection Required: Select product options above before making new offer.
  • Offer Sent! Your offer has been received and will be processed as soon as possible.
  • Error: There was an error sending your offer, please try again. If this problem persists, please contact us.

I want to buy for another price

To make an offer please complete the form below:







Please wait...