WCU-600 Modulo wort cooling unit 600 L
WCU-600 Modulo wort cooling unit 600 L
WCU-600 Modulo wort cooling unit 600 L

Mobile independent compact equipment for preparation of ice water, wort cooling and wort aeration.

Special module, which integrates the heat exchanger unit for cooling of the wort, stone for aeration of the wort and the storage ice water tank 600 liters with an independent cooling unit on a shared frame with the wheels and adjustable legs. Ice water for cooling of the wort  is preprared in a stainless steel insulated tank and is ready for use.

not rated 18068 excluding tax Add to Cart
WCU-800 Modulo wort cooling unit 800 L
WCU-800 Modulo wort cooling unit 800 L
WCU-800 Modulo wort cooling unit 800 L

Mobile independent compact equipment for preparation of ice water, wort cooling and wort aeration.

Special module, which integrates the heat exchanger unit for cooling of the wort, stone for aeration of the wort and the storage ice water tank 800 liters with an independent cooling unit on a shared frame with the wheels and adjustable legs. Ice water for cooling of the wort  is preprared in a stainless steel insulated tank and is ready for use.

not rated 18328 excluding tax Add to Cart
CDCH-SR11 Compact direct chiller-heater 18.5-34.0 kW
CDCH-SR11 Compact direct chiller-heater 18.5-34.0 kW
CDCH-SR11 Compact direct chiller-heater 18.5-34.0 kW

The CDCH-SR11 is a direct-cooler, also known in some countries as Ultra-Cooler. It has a built-in spiral tube-in-tube, with automatic controls of the unit itself. It can either cool – or when in reverse – also heat the medium. It can control the temperature in a specific tank that you connect to it (adding a pump) for several hours or days, for example – for wine or cider stabilization. You can run through it also carbonized fluid, as the unit is closed. It cools wine/must/water in the inner tube and in the surrounding tube is the coolant which is gas (Freon). It’s using for wine cooling /heating, but also for cider, cooling down sparkling wine or cider before bottling etc. The cooling power is from 18500 W to 34000 W (from 25.15 to 46.22 HP). This cooling-heating unit is designed for indoor or covered outdoor use. The main advantages are very easy instalation without team of cooling specialists. It is produced with 3-phase (EU/USA). Designed in Germany.

not rated 18930 excluding tax Add to Cart
ITWT-12000 Ice treated water tank 12000 liters
ITWT-12000 Ice treated water tank 12000 liters
ITWT-12000 Ice treated water tank 12000 liters

Cold water container ITWT-10000 with the cooling spiral is designed for accumulation 10000 liters of ice water. The very cold treated water is using for cooling of the wort in a single-stage plate heat exchanger where the wort is cooled down from 95°C to about 6°C to 25°C. This ice water from the ITWT is heated to 70-80°C during cooling of the wort. The heated water is then kept in the hot water tank, where is stored and used for next brew batch..

not rated 19273 excluding tax Add to Cart
CWCH-MCK361 Compact water chiller & heater 45.5 kW
CWCH-MCK361 Compact water chiller & heater 45.5 kW
CWCH-MCK361 Compact water chiller & heater 45.5 kW

The CWCH-MCK361 is the compact water or glycol cooler with integrated heat exchanger, pump and water tank. This cooling unit is designed for cooling or heating external media, with the accumulation of ice (or hot) water or glycol. It can be used for cooling (or heating) of beer, cider, freeze-drying wines or heating mash. Cooling power is 45500 W (61.8 HP). This cooling-heating unit is designed for indoor or covered outdoor use. The main advantages are very easy instalation without team of cooling specialists. It is produced with 3-phase (EU/USA). Designed in Germany.

not rated 1956019700 excluding tax Add to Cart
CWCH-NCEP-552 Compact water chiller & heater 55 kW
CWCH-NCEP-552 Compact water chiller & heater 55 kW
CWCH-NCEP-552 Compact water chiller & heater 55 kW

The CWCH-NCEP-552C is the compact water or glycol cooler with integrated heat exchanger, pump and water tank. This cooling unit is designed for cooling external media, with the accumulation of ice water or glycol. It can be used for cooling of beer, cider, freeze-drying wines or heating mash. Cooling power is 55000 W . This cooling unit is designed for indoor or covered outdoor use. The main advantages are very easy instalation without team of cooling specialists. It is produced with 3-phase (EU/USA).   Designed in Germany. Price of the CWCH-NCEP-552C includes the hydronic module with glycol tank 100 liters, pump, tank heating  and bypass valve.

The CWCH-NCEP-552R is the compact water or glycol cooler and heater with integrated heat exchanger, pump and water tank. This version works on principe of reversible heat pump. This unit is designed for cooling or heating external media, with the accumulation of ice (or hot) water or glycol. It can be used for cooling (or heating) of beer, cider, freeze-drying wines or heating mash. Cooling power is 55000 W, heating power is 55000 W . This cooling-heating unit is designed for indoor or covered outdoor use. The main advantages are very easy instalation without team of cooling specialists. It is produced with 3-phase (EU/USA).   Designed in Germany. Price of the CWCH-NCEP-552R includes the hydronic module with glycol tank 100 liters, pump, tank heating and bypass valve.

not rated 1959021478 excluding tax Add to Cart
WCUHWT-200 Modulo wort cooling & water management unit 2×200 L
WCUHWT-200 Modulo wort cooling & water management unit 2×200 L
WCUHWT-200 Modulo wort cooling & water management unit 2×200 L

Special CMM module (The compact system wort cooling and the water management) which integrates the unit for cooling of the wort consists of heat exchanger, cold water tank 200 liters and independent water cooler for cooling of the wort , stone for aeration of the wort and the hot water tank 200 liters on a shared frame with the adjustable feet. Hot water that we receive from cooling of the wort in the first stage of cooling (in the plate heat exchanger integrated in the brewhouse) is collected in a stainless steel insulated tank and is ready for use. Most often brewers use the hot water for preparing the next batch of brewing, but also when washing and sanitizing other equipment in microbrewery. This recuperation of waste heat from wort cooling contributes to substantial savings in production costs.

not rated 1971821158 excluding tax Add to Cart
WCU-1200 Modulo wort cooling unit 1200 L
WCU-1200 Modulo wort cooling unit 1200 L
WCU-1200 Modulo wort cooling unit 1200 L

Mobile independent compact equipment for preparation of ice water, wort cooling and wort aeration.

Special module, which integrates the heat exchanger unit for cooling of the wort, stone for aeration of the wort and the storage ice water tank 1200 liters with an independent cooling unit on a shared frame with the wheels and adjustable legs. Ice water for cooling of the wort  is preprared in a stainless steel insulated tank and is ready for use.

not rated 20693 excluding tax Add to Cart
WCUHWT-400 Modulo wort cooling & water management unit 2×400 L
WCUHWT-400 Modulo wort cooling & water management unit 2×400 L
WCUHWT-400 Modulo wort cooling & water management unit 2×400 L

Special CMM module (The compact system wort cooling and the water management) which integrates the unit for cooling of the wort consists of heat exchanger, cold water tank 400 liters and independent water cooler for cooling of the wort , stone for aeration of the wort and the hot water tank 400 liters on a shared frame with the adjustable feet. Hot water that we receive from cooling of the wort in the first stage of cooling (in the plate heat exchanger integrated in the brewhouse) is collected in a stainless steel insulated tank and is ready for use. Most often brewers use the hot water for preparing the next batch of brewing, but also when washing and sanitizing other equipment in microbrewery. This recuperation of waste heat from wort cooling contributes to substantial savings in production costs.

not rated 2072423714 excluding tax Add to Cart
CDCH-SR13 Compact direct chiller-heater 22.1-41.0 kW
CDCH-SR13 Compact direct chiller-heater 22.1-41.0 kW
CDCH-SR13 Compact direct chiller-heater 22.1-41.0 kW

The CDCH-SR13 is a direct-cooler, also known in some countries as Ultra-Cooler. It has a built-in spiral tube-in-tube, with automatic controls of the unit itself. It can either cool – or when in reverse – also heat the medium. It can control the temperature in a specific tank that you connect to it (adding a pump) for several hours or days, for example – for wine or cider stabilization. You can run through it also carbonized fluid, as the unit is closed. It cools wine/must/water in the inner tube and in the surrounding tube is the coolant which is gas (Freon). It’s using for wine cooling /heating, but also for cider, cooling down sparkling wine or cider before bottling etc. The cooling power is from 22100 W to 41000 W (from 30.05 to 55.74 HP). This cooling-heating unit is designed for indoor or covered outdoor use. The main advantages are very easy instalation without team of cooling specialists. It is produced with 3-phase (EU/USA). Designed in Germany.

not rated 21090 excluding tax Add to Cart
WCU-1500 Modulo wort cooling unit 1500 L
WCU-1500 Modulo wort cooling unit 1500 L
WCU-1500 Modulo wort cooling unit 1500 L

Mobile independent compact equipment for preparation of ice water, wort cooling and wort aeration.

Special module, which integrates the heat exchanger unit for cooling of the wort, stone for aeration of the wort and the storage ice water tank 1500 liters with an independent cooling unit on a shared frame with the wheels and adjustable legs. Ice water for cooling of the wort  is preprared in a stainless steel insulated tank and is ready for use.

not rated 21170 excluding tax Add to Cart
CWCH-MCK441 Compact water chiller & heater 50.7 kW
CWCH-MCK441 Compact water chiller & heater 50.7 kW
CWCH-MCK441 Compact water chiller & heater 50.7 kW

The CWCH-MCK441 is the compact water or glycol cooler with integrated heat exchanger, pump and water tank. This cooling unit is designed for cooling or heating external media, with the accumulation of ice (or hot) water or glycol. It can be used for cooling (or heating) of beer, cider, freeze-drying wines or heating mash. Cooling power is 50700 W (68.9 HP). This cooling-heating unit is designed for indoor or covered outdoor use. The main advantages are very easy instalation without team of cooling specialists. It is produced with 3-phase (EU/USA). Designed in Germany.

not rated 2152021660 excluding tax Add to Cart
WCUHWT-600 Modulo wort cooling & water management unit 2×600 L
WCUHWT-600 Modulo wort cooling & water management unit 2×600 L
WCUHWT-600 Modulo wort cooling & water management unit 2×600 L

Special CMM module (The compact system wort cooling and the water management) which integrates the unit for cooling of the wort consists of heat exchanger, cold water tank 600 liters and independent water cooler for cooling of the wort , stone for aeration of the wort and the hot water tank 600 liters on a shared frame with the adjustable feet. Hot water that we receive from cooling of the wort in the first stage of cooling (in the plate heat exchanger integrated in the brewhouse) is collected in a stainless steel insulated tank and is ready for use. Most often brewers use the hot water for preparing the next batch of brewing, but also when washing and sanitizing other equipment in microbrewery. This recuperation of waste heat from wort cooling contributes to substantial savings in production costs.

not rated 2164225010 excluding tax Add to Cart
WCU-2000 Modulo wort cooling unit 2000 L
WCU-2000 Modulo wort cooling unit 2000 L
WCU-2000 Modulo wort cooling unit 2000 L

Mobile independent compact equipment for preparation of ice water, wort cooling and wort aeration.

Special module, which integrates the heat exchanger unit for cooling of the wort, stone for aeration of the wort and the storage ice water tank 2000 liters with an independent cooling unit on a shared frame with the wheels and adjustable legs. Ice water for cooling of the wort  is preprared in a stainless steel insulated tank and is ready for use.

not rated 22499 excluding tax Add to Cart
WCUHWT-300 Modulo wort cooling & water management unit 2×300 L
WCUHWT-300 Modulo wort cooling & water management unit 2×300 L
WCUHWT-300 Modulo wort cooling & water management unit 2×300 L

Special module, which integrates the unit for cooling of the wort consists of heat exchanger, ice water tank 300 liters and independent water cooler for cooling of the wort , stone for aeration of the wort and the hot water tank 300 liters on a shared frame with the wheels and adjustable legs. Hot water that we receive from cooling of the wort in the first stage of cooling (in the plate heat exchanger integrated in the brewhouse) is collected in a stainless steel insulated tank and is ready for use. Most often brewers use the hot water for preparing the next batch of brewing, but also when washing and sanitizing other equipment in microbrewery. This recuperation of waste heat from wort cooling contributes to substantial savings in production costs.

not rated 22666 excluding tax Add to Cart
WCUHWT-800 Modulo wort cooling & water management unit 2×800 L
WCUHWT-800 Modulo wort cooling & water management unit 2×800 L
WCUHWT-800 Modulo wort cooling & water management unit 2×800 L

Special CMM module (The compact system wort cooling and the water management) which integrates the unit for cooling of the wort consists of heat exchanger, cold water tank 800 liters and independent water cooler for cooling of the wort , stone for aeration of the wort and the hot water tank 800 liters on a shared frame with the adjustable feet. Hot water that we receive from cooling of the wort in the first stage of cooling (in the plate heat exchanger integrated in the brewhouse) is collected in a stainless steel insulated tank and is ready for use. Most often brewers use the hot water for preparing the next batch of brewing, but also when washing and sanitizing other equipment in microbrewery. This recuperation of waste heat from wort cooling contributes to substantial savings in production costs.

not rated 2328526653 excluding tax Add to Cart
CWCH-MCK541 Compact water chiller & heater 59.9 kW
CWCH-MCK541 Compact water chiller & heater 59.9 kW
CWCH-MCK541 Compact water chiller & heater 59.9 kW

The CWCH-MCK541 is the compact water or glycol cooler with integrated heat exchanger, pump and water tank. This cooling unit is designed for cooling or heating external media, with the accumulation of ice (or hot) water or glycol. It can be used for cooling (or heating) of beer, cider, freeze-drying wines or heating mash. Cooling power is 59900 W (81.4 HP). This cooling-heating unit is designed for indoor or covered outdoor use. The main advantages are very easy instalation without team of cooling specialists. It is produced with 3-phase (EU/USA). Designed in Germany.

not rated 2349023640 excluding tax Add to Cart
WCUHWT-400A Modulo wort cooling & water management unit 2×400 L
WCUHWT-400A Modulo wort cooling & water management unit 2×400 L
WCUHWT-400A Modulo wort cooling & water management unit 2×400 L

Special module, which integrates the unit for cooling of the wort consists of the plate heat exchanger for cooling of the wort with integrated porous stone in the pipe for the aeration of the wort , ice water tank 400 liters (ITWT) and the hot water tank 400 liters (HWT) on a shared frame with the wheels or adjustable legs. Ice water is pre-chilled by an external water chiller in the primary tank (ITWT). Ice water is intended to cooling of wort in the heat plate exchanger and also for accurate mixing with hot water before the wort preparation process. Then the water is heated and stored as hot water in the second tank (HWT) and is ready for next use. The hot water tank is equipped also its own electric heating system for pre-heating of water. Hot water is needed in the wort brew process and for cleaning and sanitizing of the all brewery equipment. Most often brewers use the hot water for preparing the next batch of brewing, but also when washing and sanitizing other equipment in microbrewery. This recuperation of waste heat from wort cooling contributes to substantial savings in beer production costs.

Compatible with wort brew machines Breworx Modulo Classic 250A and Breworx Modulo Lite-ME 250A – only versions with the electric-oil heating system and the automatic control system.

not rated 23611 excluding tax Add to Cart