A2-configuration of the CCT-M modular cylindrically-conical fermentation tanks

Modular cylindrically-conical fermentation tanks CCT-M are very versatile products from our production portfolio that enable freely assemble the beer production tank to a configuration that is momentally required by user with respect to the intended use. A current configuration of the tank can be changed at any time to any other configuration according to required purpose using optional accessories and their many combinations.

More about the CCT-M modular fermentation system :

About the A2 configuration

The A2 configuration is a simplified assembly of the CCT-M fermentation tank (without a filling level indicator), that allows a controlled fermentation of beer, cider, wine, sparkling wine, must, lemonade and other similar beverages.

If the tank is equipped with a safety valve 0.5bar (non-pressure vessels that do not require a certification by the European Directive PED 2014/68/EU) then the tank is suitable for the production only of non-carbonized beverages like wine, soft drinks, but also for the main fermentation process of carbonated alcoholic beverages like beer, cider or sparkling wines.

If the fermentor is equipped with a safety valve 3.0bar and the pressure tank is certified according to PED 2014/68/EU then it can be used for both primary fermentation and maturing process of all carbonizated beverages. The configuration 3.0bar is suitable for controlled fermentation and maturation (under pressure) of all kinds of carbonated alcoholic beverages like beer, cider and sparkling wines.


Equipment of the tank in the A2 configuration allows you to set the required pressure in the tank and also monitoring of the actual pressure on the manometer. The fermentation process is indicated by bubbling CO2 gas through water in the fermentation lock. Everything you need is included in the adjustable pressure valve (optional part). For the production of non-fermented beverages the adjustable pressure valve is not necessary accessory (it may be excluded from the configuration).

The tank is also equipped with a fixed or rotating spray ball with a pipe connection for easy automatic washing and sanitizing tank using the CIP station (optional equipment).

The sampling valve (optional part) allows collection of product samples to their analysis. The fermentor can be equipped with the carbonization candle with porous stone (optional part) to additional carbonation of beverages before the final bottling process, using the multiport MT-DN40. The same multiport can be used also for the hops extraction into cold beer whenever some special types beer like IPA are produced in the fermentation tank. The port is also available for connection of the flotation machine (optional equipment) that is needed during the juice or cider production.

A placing of the input/output valve for a pure product and the tank draining valve very near of the tank prevents unwanted putrefaction of yeast inside uninsulated long pipes as is the case in most fermentation tanks of other manufacturers.

The only difference in comparison with the configuration A1 is : The tank in A2 configuration includes the removable input/output valve for a pure product and removable draining pipes RO1 and DO1 for easy access to the tank with external filling and draining hoses. Both of these pipes should be dismounted and cleaned before each use of the tank.

No products were found matching your selection.